Welch Allyn 5091-48 User Manual
Mobile Stand Conversion Kit
Aneroid Instructions
Tools Required: Phillips screwdriver
5/16 open / box wrench
5/16 open / box wrench
1. Disassemble mobile or wall mounted manometer from old bracket.
2. Assemble new bracket to manometer. Use two (2) 1/2 inch long screws with nuts as shown.
3. Insert bearing and bushing into bracket.
4. Assemble manometer and bracket to basket. Use the (3) 3/8 inch long screws and nuts provided.
5. To complete the mobile stand assembly, refer to the new instruction booklet provided.
Welch Allyn, Inc.
4341 State Street Road
Skaneateles Falls, NY 13153 USA
5091-48
95P324 Rev. B
Mobile Stand Conversion Kit
Aneroid Instructions
Tools Required: Phillips screwdriver
5/16 open / box wrench
5/16 open / box wrench
1. Disassemble mobile or wall mounted manometer from old bracket.
2. Assemble new bracket to manometer. Use two (2) 1/2 inch long screws with nuts as shown.
3. Insert bearing and bushing into bracket.
4. Assemble manometer and bracket to basket. Use the (3) 3/8 inch long screws and nuts provided.
5. To complete the mobile stand assembly, refer to the new instruction booklet provided.
5091-48
95P324 Rev. B
Welch Allyn, Inc.
4341 State Street Road
Skaneateles Falls, NY 13153 USA
HEX NUT
32P795
(5 EA)
BEARING
64P515
BUSHING
8P953
1/2 INCH LONG SCREWS
9P2455 (2 EA)
ACORN NUT
32P764
FLAT WASHER
22P1440
3/8 INCH LONG SCREWS
9P2827 (3 EA)
BASKET
96P134
BASKET
14P1790
HEX NUT
32P795
(5 EA)
BEARING
64P515
BUSHING
8P953
1/2 INCH LONG SCREWS
9P2455 (2 EA)
ACORN NUT
32P764
FLAT WASHER
22P1440
3/8 INCH LONG SCREWS
9P2827 (3 EA)
BASKET
96P134
BASKET
14P1790
Loading...