Weiser PREMIS, 66085 / 01 Installation And User Manual

1 / 11 © 2017 Spectrum Brands, Inc.

USA: 1-800-677-5625 • Canada : 1-800-501-9471
www.weiserlock.com

66085 / 01

ENGLISH

Installation and

User Guide

Parts in the boxRequired tools

Additional tools
(depending on application)

Latch with
rectangula r faceplate

Ruler

Phillips screwdriver

Hammer

Wood bl ock

Latch screws Strike screws Mounting plate screws

03809 49191 6410948654

Mounting plate SmartKey toolInterior assem bly

Keys

Battery pac k Interior cover Batteries

Interior asse mbly
screws

Interior cover
screws

Drive-in latch Strike Exterior

assembly

Adapter ring

A

G

NS

UV

P

HJKLM

BC DE F

Note: Part numbers are printed on screw bags.

SL03031011

Q

W

R

2 / 11 © 2017 Spectrum Brands, Inc.

USA: 1-800-677-5625 • Canada : 1-800-501-9471
www.weiserlock.com

If drilling a new door, use the supplied template and the complete
door drilling instructions available at www.weiserlock.com/doorprep.

Note: Additio nal door preparation m ay be required for
doors with 11/ 2" (38 mm) holes . Consult the deadb olt
drilling instructions at www.weiserlock.com/doorprep

or

Measure to conirm that th e hole in the door
is either 21/8" (5 4 mm) or 11/2" (38 mm).

A

21/8"

54 mm

11/2"

38 mm

backset

Measure to conirm that th e backset is
either 23/8" or 23/4" (60 or 70 mm).

23/8" or 23/4"

60 or 70 mm

B

Measure to conirm that th e hole in
the door edge is 1 " (25 mm).

C

1"

25 mm

13/8"– 2"

35 – 44 mm

Measure to conirm th at the door is between
13/8" and 2" ( 35 mm and 51 mm) thick.

D

1

Prepare the door and check dimensions

3 / 11 © 2017 Spectrum Brands, Inc.

USA: 1-800-677-5625 • Canada : 1-800-501-9471
www.weiserlock.com

A

A

N (2x)

A

A

B

B

B

B

Q (2x)

R (2x)

C

Longer screws , Q,
install cl osest to
the door jam b.

door frame

A B

C

D

Is the door edge c hiseled?

Is the D-shap ed hole centered in the door hole?

Which latch are you ins talling?Hold the latch in front of th e door hole, with the latch

face lush again st the door edge.

YES

YES

NO

NO

Use latch “A”. If the
latch bolt is no t already
extended , extend the
latch bolt as sh own.

No adjustme nt is required.
Proceed to nex t step.

D-shaped hole centered D-shaped hole NOT centered

Rotate latch face as
shown to extend la tch.

“UP” is

on top

“UP” is

on top

wood
block

Use latch “B ”. If the
latch bolt is no t already
extended , extend the
latch bolt as sh own.

Latch “A” Latch “B”

E

Install strike on the do or frame.

Make sure the hole in the d oor frame is drilled a

minimum of 1" ( 25 mm) deep.

or

chiseled

not
chiseled

or

or

Note: The long er screws, Q, (3" / 76 mm) mus t be used
to maintain highest security.

2

Install the latch and strike

3

Install the exterior assembly

Diameter i s 21/8" (54 mm) Diameter i s 11/2" (38 mm)

21/8"

54 mm

11/2"

38 mm

“E” is requi red for installation .
Install “ E” on “D”.

“E” is not ne eded for
installat ion. Discard “E”.

or

What is the diameter of th e hole in the door? Install exterio r assembly and mounting plate.

A C

B

a

b

c

d

Cable goe s
underneath
latch.

Rotate torque b lade to align

with D-shaped hole.

Route cable
through cen ter
hole, the n
push cabl e into
bottom hole.

Support exterior
assembly during
mounting pl ate
installation.

Keep paralle l to
edge of door

Insert key an d test latch.
If latch does n ot extend
or retract smo othly,
adjust screws (S).

Remove key when in ished
and make sure the l atch
bolt is fully ex tended.

Tighten
screws evenly.

D

E

S

S

S

F

E

4 / 11 © 2017 Spectrum Brands, Inc.

USA: 1-800-677-5625 • Canada : 1-800-501-9471
www.weiserlock.com

Locate screws for step 3C a nd keep them within reach.

D

G