Weiser Kevo Convert Smart Lock User Manual
ENGLISH
66102 / 01
Installation and
User Guide
Parts in the boxRequired tools
Kit “A” Kit “B” Kit “C”
Ruler
Phillips screwdriver
Existing key
Mounting plate
Mounting plate
screws
Interior cover Interior assembly Battery pack AA batteries
Adapter
Interior assembly
screws
Interior cover
screws
Mounting plate Mounting plate Adapters
Mounting plate
screws
Adapters
Interior assembly
screws
Interior cover
screws
Mounting plate
screws
Interior assembly
screws
Interior cover
screws
Kevo Support: www.weiserlock.com/kevo/support
USA: 1-800-677-5625 • Canada : 1-800-501-9471
1 / 13 © 2016 Spectrum Brands, Inc.
Make sure your existing deadbolt is compatible.
1
If you have a standard deadbolt mounted separately from the
handle below it, it is compatible with Kevo Convert.
Measure the thickness of your door.
2
Measure to conirm that your door is either
35 mm or 44 mm (13/8" or 13/4") thick.
Not Compatible
Rim
Lock
35 mm or 44 mm
13/8"or 13/4"
Not Compatible Not CompatibleCompatible
Mortise
Lock
Integrated
Interior
Disassemble your existing deadbolt.
3
Make sure your door is open and extend your latch bolt.
A B
extended
Kevo Support: www.weiserlock.com/kevo/support
USA: 1-800-677-5625 • Canada : 1-800-501-9471
2 / 13 © 2016 Spectrum Brands, Inc.
Remove all existing deadbolt hardware from the interior side
of your door. Keep your deadbolt exterior in place.
deadbolt
exterior
Determine the parts needed for your door.
4
Look at the hole in your door.
What shape is your torque blade (the part sticking out through the latch)?
D-shape
Weiser and Kwikset deadbolts:
Use kit “A” for your door.
Baldwin Reserve and
Baldwin Prestige deadbolts:
Use kit “B” for your door.
You will need the black adapter
and the thicker gold screws.
Vertical rectangle
Baldwin Estate deadbolts:
Use kit “B” for your door.
You will need the gold adapter
and the thinner gold screws.
thinner
screws
Slanted rectangle
Schlage deadbolts:
Use kit “C” for your door.
You will need the silver adapter.
Horizontal rectangle
Schlage deadbolts:
Use kit “C” for your door.
You will need the gold adapter.
thicker
screws
Kevo Support: www.weiserlock.com/kevo/support
USA: 1-800-677-5625 • Canada : 1-800-501-9471
For a list of compatible deadbolt models, see page 11.
3 / 13 © 2016 Spectrum Brands, Inc.
Install the mounting plate and test your latch.
5
Place the mounting plate on the door so that the torque
A
blade inserts through the center hole.
torque blade
Note: A D-shaped torque blade is shown, but installation is the same for all models.
Insert your key and test the latch for smooth operation. Remove your key and make sure the bolt is fully extended.
C D
If the latch does not
extend or retract
smoothly, adjust the
mounting screws.
Secure the mounting plate with the mounting screws.
B
Keep parallel to the
edge of the door.
Tighten
screws evenly.
Black Components Only: To
determine which mounting
screws to use, test one of
the thicker screws irst.
If the thicker screw its, continue
installing the thicker screws.
If the thicker screw doesn't it,
install the thinner screws.
fully
extended
Kevo Support: www.weiserlock.com/kevo/support
USA: 1-800-677-5625 • Canada : 1-800-501-9471
4 / 13 © 2016 Spectrum Brands, Inc.
Loading...