User ManUal
ADURO BTA2
ADURO BTA2
Bluetooth Audio Receiver with Mic/Call Support
Features and Functions
The Aduro Bluetooth Audio Receiver features a small and round design, allowing
you to place it on your car dashboard for easy accessibility.
It supports SD cards enabling you to enjoy music from your storage devices in
your car. It can also be used to connect to your home audio system to access
FM radio.
Functions: skip forward, skip back,
volume, stop / mute
Phone functions: answer, end call,
call back
Modes: 1. Bluetooth 2. SD card
3. U disk 4. FM radio
Pairing
To pair your Bluetooth Audio Receiver with your device, you will need to press
the mode button until the LED indicator begins to icker repeatedly. You will then
need to search for the Bluetooth device name
to type a 4 digit password, type in 0000.
Once your connection is established, your LED indicator will begin to ash
slower.
Aduro BTA2. If you are prompted
Product Specications
Power supply: Built-in battery
Bluetooth version: Bluetooth
Output: 3.5mm audio jack
Receiving distance: 10m barrier-free
Standard accessories: USB charging cable, 3.5mm audio cable
Wireless Bluetooth technology
Smooth switching between incoming call and music mode
Microphone for handsfree phone calls
Functionality
1. Music Receiver
Connect to your smart phone and enjoy
your phone’s music through the car
speakers. You can also insert other
storage devices such as SD cards or
USB disks, so you’ll never be short of
music while driving!
2. Handsfree Calls
At an easy push of a button, switch
to handsfree phone mode which
enables you to make/receive calls.
Phone function button allows you to
answer and end calls, and double
click to redial the most recently
dialed number.
Power light:
Phone function
Answer / End call
Double click to redial
Skip back / volume down
Switch back to the previous
song with one press
Turn volume down by
holding the button
Switch mode button
1. Bluetooth mode
2. SD card mode
3. USB disk mode
4. FM mode
Stop / play
Hold down to turn on / off
Skip forward / volume up
Skip to next song with one
press
Turn volume up by holding
the button
Microphone
Federal Communications Commission (FCC) Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
●Reorient or relocate the receiving antenna.
●Increase the separation between the equipment and receiver.
●Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
●Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications made to this device not expressly approved by
SHENZHEN WEIKING TECHNOLOGY CO.,LTD may void the FCC authorization to operate
this device.
Note: The manufacturer is not responsible for any radio or tv interference caused by
unauthorized modifications to this equipment. Such modifications could void the user’s
authority to operate the equipment.
Loading...