WEIKING TECHNOLOGY BT204 User Manual

Bluetooth speaker (BT204)

Function :

It is 2 It is Bluetooth speaker that can be wirelessly connected to Bluetooth devices

such as smart phones, tablets and computers to playback any music collection stored on

them. Thanks to its powerful battery, the system delivers full stereo sound, separate from

any mains supply, for up to 4-7 hours and is the perfect companion for the park, whilst

camping or on the beach. Process control, can get rid of complicated connections and

wiring distance constraints, the user can enjoy high quality music.

It shall be also defined
as a Bluetooth receiver with aux output connection. please take a few minutes to
familiarize yourself with the speaker function button.

Bluetooth speaker Function:

Bluetooth speaker: urn on the speaker and the Blue led will be flashing to enter into

pairing mode. Pairing time is around 3-10 seconds (varied by the audio device). A sound

will be out and blue led will be blinking with successful pairing and you could enjoy the

music wirelessly.

Waterproof: IPX 4 waterproof Speaker perfect for listening to your music around the
house, shower, beach, camping, hiking, rafting or backyard poolside fun.

Connect to mobile phones/tablet PCs/computers:

1. Activate your phone's Bluetooth

2. Go to your phone's Bluetooth settings , scan for new Bluetooth devices

3. Upon device found (BT-Speaker), click the device name and pair with it

4. If your phone ask for pairing code , please enter ”0000” and confirm

5. After successful pairing, your speaker will sound a prompt tone and the power LED

Lights blue slowly.

Note: Pairing time is varied with different mobile phones. It only need to pair at the first

time and it will auto connect the devices which already paired before( Speaker only can

remember the last 8 paried devices name)

Handsfree function:

Speaker will have the voice instruction for incoming call.Short Press to answer the

call and talk to speaker directly.Short press

Long press
phone no if no phone conversation

External audio Function :

The speaker also features 1x AUX audio in port. Simply connecting the speaker with your

non-bluetooth mobile phone/MP3 player/PC/laptop with the 3.5' jack audio cable. A sound

will be out and the green led will be on,then you can play music via wired connection

Low power indication: The green led will flash if battery is lower than 10%. User need to

to reject the incoming call. Long press to dial back the last dialed

to end the call and back to play status.

charge the speaker timely. Speaker will be off When battery left only 3%

Power saving:

It will be automatically power off if the Bluetooth is disconnected more than 10 minutes.

Charging :

Connect the micro USB charging cable to a computer, red Led indication for
charging status.

Red LED goes off upon charging finished. (5-6 hours for charging time.)

Computer connection

No Need to install the Bluetooth software if computer itself has the Bluetooth function;

Install the Bluetooth software first if computer don’t have Bluetooth;

1) Click the Bluetooth icon on the right corner of computer and select the “ Add the

equipment”

2) Turn on the speaker

3) Computer will search the Bluetooth devices automatically;

4) Upon device found (bt speaker), click the device name and pair with it

5) If you need to enter a password to the pairing process , please enter “0000”

6) After successful pairing, your speaker will sound a prompt tone and the power LED

Lights blue.

7) Please use the media center from computer itself, if need to adjust the next or previous

songs after connecting with Bluetooth speaker.

Specification:
Speaker Interface:

Audio input connector; 3.5mm aux cable to support external audio source

Charging interface: Micro USB Cable

Dimension: 171*63*70MM (L*W*H)

Weight: 490g