WEIKING TECHNOLOGY BT19S User Manual

User Guide

Accessories:

1. Micro USB Cable ( for charging )

2. 3.5mm Audio cable ( AUX-in cable )

3. User Manual

Highlights :

BT19S is a compact Bluetooth speaker that can be wirelessly connected to Bluetooth

devices such as smartphones, tablets and computers to playback any music collection

stored on them. Thanks to its powerful battery, the system delivers full stereo sound,

separate from any mains supply, for up to 4-7 hours and is the perfect companion for the

park, whilst camping or on the beach. Process control, can get rid of complicated

connections and wiring distance constraints, the user can enjoy high quality music .

Bluetooth Connection:

Turn the speaker on by switching the power switch to 'ON' position. Followed by a tone,

the blue led light flashes quickly and the speaker's voice instructions has been activated

and it will tell you the speaker have been turned on and ready to use. The speaker now

has entered the Bluetooth pairing mode.

Connect to mobile phones/tablet PCs/computers:

1. Activate your phone's Bluetooth

2. Go to your phone's Bluetooth settings , scan for new Bluetooth devices

3. Upon device found (BT-19S), click the device name and pair with it

4. If your phone ask for pairing code , please enter ”0000” and confirm

5. The speaker will have voice instructions to remind that pairing is successful.(Pairing

time is around 1 minutes which is varied by the devices)

6. After successful pairing, your speaker will sound a prompt tone and the power LED

lights blue.

Note: Memory function: It only need to pair both Bluetooth device for initial use. It will

remember the previous devices name and searching for last device and pair

automatically.

Handsfree function:

Speaker will have the voice instruction for incoming call.Short Press to answer the

call and talk to speaker directly.Short press

Long press
phone no if no phone conversation.

Low power indication: Speaker will have voice instruction if battery is low( battery voltage

is below 3.3V). User need to charge the speaker timely.

AUX audio-in connector:

to reject the incoming call.Long press to dial back the last dialed

to end the call and back to play status.

The speaker also features 1x AUX audio in port, simply connect the speaker with your

non-bluetooth mobile phone/MP3 player/PC/laptop with the 3.5' jack audio cable, then you

can play music via wired connection

Charging and computer connection :

Connect the micro USB charging cable to a computer or USB charger, red Led
indication for charging status.

Red LED goes off upon charging finished. (2~3 hours for charging time.)

Specifications:

Speaker Interfaces:

Audio input connector: 3.5mm

AUX cable : support aux external audio input.

Charging interface: Micro USB

Dimensions And Basic Parameters:

DIAMETER: 71.2 ± 0.5MM (MAX) * HEIGHT: 75.3 ± 0.5MM

Material: ABS plastic

Weight: 212g ± 5g

Electrical Specifications:

Compatibility: