Mini Wireless Speaker System
User Guide
Highlights :
BT17S speaker is a compact Bluetooth speaker that can be wirelessly connected to Bluetooth
devices such as smart phones, tablets and computers to playback any music collection stored on
them. Thanks to its powerful battery, the system delivers full stereo sound, separate from any
mains supply, for up to 3-4 hours and is the perfect companion for the park, whilst camping or on
the beach. Process control, can get rid of complicated connections and wiring distance constraints,
the user can enjoy high quality music .
Bluetooth Connection:
Press the Power ON button for seconds . The blue LED light flash quickly. The speaker now has
entered the Bluetooth pairing mode.
Connect to mobile phones/tablet PCs/computers:
1. Activate your phone's Bluetooth
2. Go to your phone's Bluetooth settings , scan for new Bluetooth devices
3. Upon device found (name ), click the device name and pair with it
4. If your phone ask for pairing code , please enter ”0000” and confirm
5. After successful pairing, your speaker will sound a prompt tone and the LED lights blue.
Note: Pairing time is varied with different mobile phones.
Bluetooth Connection:
Speaker will have the voice instruction for incoming call.Short Press
talk to speaker directly.Short press
to reject the incoming call.Long press
conversation.
to end the call and back to play status. Long press
to dial back the last dialed phone no if no phone
to answer the call and
AUX audio-in connector:
The speaker also features AUX audio in port, simply connect the speaker with your non-Bluetooth
mobile phone/MP3 player/PC/laptop with the 3.5' jack audio cable. the green and blue led will be
on ,then you can play music via wired connection
Low power indication: Speaker will have voice hint to remind you to charge if battery is
low( battery only left 10%). User need to charge the speaker timely.
Accessories:
1. Micro USB Cable ( for charging )
2. 3.5mm Audio cable ( AUX-in cable )
3. User Manual
Charging and computer connection :
Connect the micro USB charging cable to a computer or USB charger, red Led indication for
charging status.
Red LED goes off upon charging finished. (2~3 hours for charging time.)
Speaker Interfaces:
Audio input connector: 3.5mm
AUX cable : support aux external audio input.
Charging interface: Micro USB
Dimensions And Basic Parameters:
DIAMETER: 81.6 ± 0.2mm *WIDTH:52.0 ± 0.2mm* HEIGHT: 56.6 ± 0.2mm
Material: ABS plastic
Weight: 136g ± 5g
Electrical Specifications:
Compatibility:
Transmission distance: 10 m (transmission distance may different according to environmental
factors and other device's functional range)
signal to noise ratio S / N: 80dB
Sound Response: 180Hz-20KHz
Frequency Range: 180Hz-20KHz
Distortion THD: 1%
Speaker unit: outer diameter 36mm, inner magnet, 4 ohms, Speaker power ：2W
speaker unit: outer diameter 36mm, inner magnet, 4 ohms, 2W
Battery: built-in lithium battery, 3.7V/200mA
Charge voltage: 5V ± 0.25V
Charging time: 2~3 hours
Loading...