¨
QUESTIONS?
As a manufacturer, we are committed to providing complete
customer satisfaction. If you have
questions, or if there are missing
parts, we will guarantee complete
satisfaction through our
Customer Service Department.
Please CALL:
Or WRITE:
ICON Health & Fitness Ltd.
Revie Road Industrial Estate
Revie Road
Leeds
LS11 8JG
Model No. WEEVBE70400
Serial No.
Write the serial number in the
space above for future reference.
Part No. 172314 R1200A Printed in USA © 2000 ICON Health & Fitness, Inc.
ORDERING REPLACEMENT PARTS
If you encounter any problems with this product, or if you need to order replacement parts, contact the ICON
Fitness Lifestyle Ltd. office, or write:
ICON Health & Fitness Ltd.
Revie Road Industrial Estate
Revie Road
Leeds
LS11 8JG
Tel: Country Code: 0345-089009
Fax: 0113-2411120
To help us assist you, please be prepared to give the following information:
1. The MODEL NUMBER of the product (WEEVBE70400)
2. The NAME of the product (WEIDER¨PRO 205 weight bench)
3. The SERIAL NUMBER of the product (see the front cover of this manual)
4. The KEY NUMBER and DESCRIPTION of the desired part(s) (see page 14 of this manual).
Serial Number Decal
CAUTION
Read all precautions and instructions in this manual before using
this equipment. Save this manual
for future reference.
USER'S MANUAL
WEIDER is a registered trademark of ICON Health & Fitness, Inc.
www.proform.com
Visit our website at
0345-089009
0345-089009
2
TABLE OF CONTENTS
IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
PART IDENTIFICATION CHART . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
ADJUSTING THE WEIGHT BENCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
EXERCISE GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
EXPLODED DRAWING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
15
12
6
6
7
29
17
30
7
7
1
22
4
5
7
7
21
7
7
7
7
2
8
8
2
2
14
14
13
3
3
16
16
9
19
24
6
6
18
16
16
16
5
4
11
23
14
27
27
25
25
25
25
25
25
26
26
26
20
10
28
EXPLODED DRAWINGÑModel No. WEEVBE70400 R1200A
15
IMPORTANT PRECAUTIONS
WARNING
: To reduce the risk of serious injury, read the following important precautions
before using the weight bench.
1. Read all instructions in this manual before
using the weight bench.
2. Use the weight bench only as described in
this manual.
3. Use the weight bench only on a level surface.
Cover the floor beneath the weight bench to
protect the floor or carpet.
4. Inspect and tighten all parts each time you
use the weight bench. Replace any worn
parts immediately.
5. Keep children under the age of 12 and pets
away from the weight bench at all times.
6. Keep hands and feet away from moving parts.
7. Always wear athletic shoes for foot protection whilst exercising.
8. Do not use a barbell (not included) that is
longer than five feet with the weight bench.
9. Always make sure that there is an equal
amount of weight on each side of your barbell when you are using it.
10. The weight bench does not include weights.
The weight bench is designed to support a
maximum of 230 kg, including the user, a
barbell, and weights. Do not place more than
140 kg, including a barbell and weights, on
the weight rests. Do not place more than 68
kg on the leg lever.
11. When using the backrest, make sure that the
adjustment tube is firmly seated in the
adjustment brackets on the uprights.
12. If you feel pain or dizziness at any time
whilst exercising, stop immediately and
begin cooling down.
13. It is the responsibility of the owner to ensure
that all users of the weight bench are adequately informed of all precautions.
14. This bench is intended for in home use only.
Do not use the wieght bench in any commercial, rental, or institutional setting.
WARNING: Before beginning this or any exercise program, consult your physician. This
is especially important for persons over the age of 35 or persons with pre-existing health problems.
Read all instructions before using. ICON assumes no responsibility for personal injury or property
damage sustained by or through the use of this product.
14
PART LISTÑModel No. WEEVBE70400 R1200A
Note: Ò#Ó indicates a non-illustrated part. Specifications are subject to change without notice. See the back cover
of this manual for information about ordering replacement parts.
3
Key No. Qty. Description
1 1 Left Upright
2 4 M8 Washer
3 4 M8 x 48mm Carriage Bolt
4 3 M10 Nylon Locknut
5 3 M10 x 75mm Bolt
6 6 M6 x 16mm Screw
7 11 M8 Nylon Locknut
8 4 M8 x 68mm Bolt
9 1 Base
10 1 M4 x 25mm Screw
11 1 1Ó Angled Round Cap
12 2 Backrest Bracket
13 1 Adjustment Tube
14 3 1Ó Round Inner Cap
15 1 Backrest
16 7 38mm x 50mm Inner Cap
Key No. Qty. Description
17 1 Right Barbell Lock Pin
18 1 Seat
19 1 Bench Frame
20 1 Front Leg
21 1 Cross Brace
22 1 Right Upright
23 1 Leg Lever
24 1 Bumper
25 6 3/4Ó Round Inner Cap
26 6 Foam Pad
27 3 Pad Tube
28 1 Weight Stop
29 1 M8 x 75mm Bolt
30 1 Left Barbell Lock Pin
# 1 UserÕs Manual
BEFORE YOU BEGIN
Backrest
Weight Rests
Weight Rest
Barbell Lock Pin
Adjustment Tube
Leg Lever
Seat
Weight Tube
Thank you for selecting the WEIDER¨PRO 205 weight
bench. The versatile PRO 205 weight bench is
designed to be used with your own weight set (not
included) to develop every major muscle group of the
body. Whether your goal is a shapely figure, dramatic
muscle size and strength, or a healthier cardiovascular
system, the PRO 205 weight bench will help you to
achieve the specific results you want.
For your benefit, read this manual carefully before
using the weight bench. If you have additional ques-
tions, please call our Customer Service Department.
To help us assist you, please note the product model
number and serial number before calling. The model
number is WEEVBE70400. The serial number can be
found on a decal attached to the weight bench (see
the front cover of this manual).
Before reading further, please review the drawing
below and familiarise yourself with the parts that are
labelled.
134
MONDAY
Date:
/ /
EXERCISE WEIGHT SETS REPS
EXERCISE WEIGHT SETS REPS
EXERCISE WEIGHT SETS REPS
AEROBIC EXERCISE
AEROBIC EXERCISE
TUESDAY
Date:
/ /
WEDNESDAY
Date:
/ /
THURSDAY
Date:
/ /
FRIDAY
Date:
/ /
Make photocopies of this page for scheduling and recording your workouts.
PART IDENTIFICATION CHART
This chart is provided to help you identify the small parts used in assembly. The number in parenthesis below
each part refers to the key number of the part. The second number refers to the quantity needed for assembly.
Important: Some parts may have been pre-assembled for shipping purposes. If you cannot find a part in
the parts bags, check to see if it has been pre-assembled.
M8 Nylon Locknut (7)Ð11
M8 Washer (2)Ð4
M10 Nylon Locknut (4)Ð3
3/4Ó Round Inner
Cap (25)Ð6
1Ó Angled Round Cap (11)Ð1
M8 x 48mm Carriage Bolt (3)Ð4
M6 x 16mm Screw (6)Ð6
1Ó Round Inner Cap (14)Ð3
M8 x 68mm Bolt (8)Ð4
M10 x 75mm Bolt (5)Ð3
M4 x 25mm Screw (10)Ð1
M8 x 75mm Bolt (29)Ð1
12 5
1. Before beginning assembly, be sure that you
have read and understand the information in
the box above.
Set the Base (9) on the floor. The indented holes
in the Base must be facing the floor.
Press two 38mm x 50mm Inner Caps (16) into the
Base (9). Insert four M8 x 48mm Carriage Bolts
(3) up through the Base.
2. Slide the Left Upright (1) onto the indicated M8 x
48mm Carriage Bolts (3). Hand tighten an M8
Nylon Locknut (7) onto each Carriage Bolt. Make
sure that the Upright is turned as shown. Do not
tighten the Nylon Locknuts yet.
Attach the Right Upright (22) in the same manner.
Attach the Left Barbell Lock Pin (30) to the Left
Upright (1) with an M8 Nylon Locknut (7). Attach
the Right Barbell Lock Pin (17) to the Right
Upright (22) in the same manner.
1
ASSEMBLY
Before beginning assembly, carefully read the
following information and instructions:
¥ Place all parts of the weight bench in a cleared
area and remove the packing materials; do not
dispose of the packing materials until assembly
is completed.
¥ Read each assembly step before you begin.
¥ For help identifying the small parts used in
assembly, use the PART IDENTIFICATION
CHART on page 4. Note: Some small parts may
have been pre-attached for shipping purposes. If
a part is not in the parts bag, check to see if it
has been pre-attached.
¥ Tighten all parts as you assemble them, unless
instructed to do otherwise.
¥ As you assemble the weight bench, make sure
that all parts are oriented as shown in the drawings.
THE FOLLOWING TOOLS (NOT INCLUDED) ARE
REQUIRED FOR ASSEMBLY:
¥ Two (2) adjustable spanners
¥ One (1) standard screwdriver
¥ One (1) rubber mallet
¥ Lubricant, such as grease or petroleum jelly,
and soapy water will also be needed.
Assembly will be more convenient if you have the
following tools: A socket set, a set of open-end or
closed-end spanners, or a set of ratchet spanners.
Indented
holes must
face floor
2
COOLING DOWN
End each workout with 5 to 10 minutes of stretching.
Include stretches for both your arms and legs. Move
slowly as you stretchÑdo not bounce. Ease into each
stretch gradually and go only as far as you can without
strain. Stretching at the end of each workout is very
effective for increasing flexibility.
STAYING MOTIVATED
For motivation, keep a record of each workout. The
chart on page 13 of this manual can be photocopied
and used to schedule and record your workouts. List
the date, exercises performed, weight, and numbers of
sets and repetitions completed. Record your weight
and key body measurements at the end of every
month.
Remember, the key to achieving the greatest results is
to make exercise a regular and enjoyable part of your
everyday life.
MUSCLE CHART
A. Sternomastoid (neck)
B. Pectoralis Major (chest)
C. Biceps (front of arm)
D. Obliques (waist)
E. Brachioradials (forearm)
F. Hip Flexors (upper thigh)
G. Abductor (outer thigh)
H. Quadriceps (front of thigh)
I. Sartorius (front of thigh)
J. Tibialis Anterior (front of calf)
K. Soleus (front of calf)
L. Rectus Abdominus (stomach)
M. Adductor (inner thigh)
N. Trapezius (upper back)
O. Rhomboideus (upper back)
P. Deltoid (shoulder)
Q. Triceps (back of arm)
R. Latissimus Dorsi (mid back)
S. Spinae Erectors (lower back)
T. Gluteus Medius (hip)
U. Gluteus Maximus (buttocks)
V. Hamstring (back of leg)
W. Gastrocnemius (back of calf)
N
O
P
Q
R
S
T
U
W
V
M
L
J
G
F
H
I
K
E
C
D
B
A
A
B
C
D
E
H
I
J
K
N
O
P
Q
R
S
U
V
W
M
L
F
G
T
9
16
16
3
3
1
22
3
7
30
17
7
7
116
3. Attach the Cross Brace (21) to the Left Upright (1)
with two M8 x 68mm Bolts (8), two M8 Washers (2),
and two M8 Nylon Locknuts (7). Use the upper
two holes, as shown.
Attach the Cross Brace (21) to the Right Upright
(22) with two M8 x 68mm Bolts (8), two M8
Washers (2), and two M8 Nylon Locknuts (7).
Tighten all M8 Nylon Locknuts (7) used in steps
2 and 3.
4. Press a 1Ó Round Inner Cap (14) into each end of
the Adjustment Tube (13).
Set the Adjustment Tube (13) into one set of adjustment brackets on the Left and Right Uprights (1,
22).
5. Lubricate an M10 x 75mm Bolt (5). Attach the
Bench Frame (19) to the Cross Brace (21) with the
M10 x 75mm Bolt and an M10 Nylon Locknut (4).
The Bench Frame must be turned as shown. Do
not overtighten the Nylon Locknut.
Attach the Bumper (24) to the Bench Frame (19)
with an M4 x 25mm Screw (10).
Press a 38mm x 50mm Inner Cap (16) into the
Bench Frame (19).
6. Press a 38mm x 50mm Inner Cap (16) into each
end of the Front Leg (20).
Lubricate an M10 x 75mm Bolt (5). Attach the Front
Leg (20) to the Bench Frame (19) with the M10 x
75mm Bolt and an M10 Nylon Locknut (4). Do not
overtighten the Nylon Locknut.
6
3
4
EXERCISE GUIDELINES
THE FOUR BASIC TYPES OF WORKOUTS
¥ Muscle Building
In order to increase the size and strength of your muscles, you must push your muscles to a high percentage of their capacity. You must also progressively
increase the intensity of your exercise so that your
muscles will continually adapt and grow. Each individual exercise can be tailored to the proper intensity
level by changing the amount of weight used, or the
number of repetitions or sets performed. (A ÒrepetitionÓ
is one complete cycle of an exercise, such as one situp. A ÒsetÓ is a series of repetitions performed consecutively.)
The proper amount of weight for each exercise
depends upon the individual user. It is up to you to
gauge your limits. Select the amount of weight that
you think is right for you. Begin with 3 sets of 8 repetitions for each exercise that you perform. Rest for 3
minutes after each set. When you can complete 3 sets
of 12 repetitions without difficulty, increase the amount
of weight.
¥ Toning
To tone your muscles, you must push your muscles to
a moderate percentage of their capacity. Select a moderate amount of weight and increase the number of
repetitions in each set. Complete as many sets of 15
to 20 repetitions as possible without discomfort. Rest
for 1 minute after each set. Work your muscles by
completing more sets rather than by using high
amounts of weight.
¥ Weight Loss
To lose weight, use a low amount of weight and
increase the number of repetitions in each set.
Exercise for 20 to 30 minutes, resting for a maximum
of 30 seconds between sets.
¥ Cross Training
In the pursuit of a complete and well-balanced fitness
program, many have found that cross training is the
answer. We recommend that on Monday, Wednesday
and Friday, you plan weight training workouts. On
Tuesday and Thursday, plan 20 to 30 minutes of aerobic exercise, such as cycling, running or swimming.
Rest from both weight training and aerobic exercise for
at least one full day each week to give your body time
to regenerate. By combining weight training with aerobic exercise, you can reshape and strengthen your
body, plus develop a stronger heart and lungs.
PERSONALISING YOUR EXERCISE PROGRAM
We have not specified an exact length of time for each
workout, or a specific number of repetitions or sets for
each exercise. It is very important to avoid overdoing it
during the first few months of your exercise program,
and to progress at your own pace. If you experience
pain or dizziness at any time whilst exercising, stop
immediately and begin to cool down. Find out what is
wrong before continuing. Remember that adequate
rest and a proper diet are also important.
WARMING UP
Begin each workout with 5 to 10 minutes of light
stretching and exercise to warm up. Warming up prepares your body for exercise by increasing circulation,
raising your body temperature and delivering more
oxygen to your muscles.
WORKING OUT
Each workout should include 6 to 10 different exercises. Select exercises for every major muscle group,
with emphasis on the areas that you want to develop
the most. To give balance and variety to your workouts, vary the exercises from workout to workout.
Schedule your workouts for the time of day when your
energy level is the highest. Each workout should be
followed by at least one day of rest. Once you find the
schedule that is right for you, stick with it.
EXERCISE FORM
In order to obtain the greatest benefits from exercising,
it is essential to maintain proper form.
Maintaining proper form means moving through the full
range of motion for each exercise, and moving only
the appropriate parts of the body. Exercising in an
uncontrolled manner will leave you feeling exhausted.
The repetitions in each set should be performed
smoothly and without pausing. The exertion stage of
each repetition should last about half as long as the
return stage. Proper breathing is important. Exhale
during the exertion stage of each repetition and inhale
during the return stroke; never hold your breath. Rest
for 3 minutes after each set if you are doing a musclebuilding workout, 1 minute after each set if you are
doing a toning workout, and 30 seconds after each set
if you are doing a weight loss workout. Spend the first
couple of weeks familiarising yourself with the equipment and learning the proper form for each exercise.
7
7
2
2
1
22
8
8
21
Do not
use these
Holes
1
22
Adjustment
Brackets
14
14
13
5
4
21
19
24
16
10
Lubricate
5
16
16
19
20
4
5
Lubricate
10 7
7. Press two 38mm x 50mm Inner Caps (16) into the
Leg Lever (23). Press a 1Ó Round Inner Cap (14)
into the Leg Lever. Press a 1Ó Angled Round Cap
(11) onto the Leg Lever.
Lubricate an M10 x 75mm Bolt (5). Attach the Leg
Lever (23) to the Front Leg (20) with the M10 x
75mm Bolt and an M10 Nylon Locknut (4). Do not
overtighten the Nylon Locknut.
Slide the Weight Stop (28) onto the Leg Lever (23).
8. Attach both Backrest Brackets (12) to the Backrest
(15) with four M6 x 16mm Screws (6). The
Backrest must be oriented as shown.
9. Lubricate an M8 x 75mm Bolt (29). Attach the
Backrest Brackets (12) to the Bench Frame (19)
with the M8 x 75mm Bolt and an M8 Nylon Locknut
(7). Do not overtighten the Nylon Locknut.
Rest the Backrest Brackets (12) on the Adjustment
Tube (13).
7
8
9
STORING THE WEIGHT BENCH
The weight bench is designed to be folded into a compact storage position when it is not in use.
First remove the Adjustment Tube (13). Lay the
Backrest (15) on the Bench Frame (19).
Fold up the Bench Frame (19), as shown in the inset
drawing. Fold down the Front Leg (20). Set the
Adjustment Tube (13) into the upper adjustment
brackets to hold the Bench Frame in place.
15
13
19
19
13
20
4
23
16
11
5
Lubricate
20
14
28
16
12
15
6
6
12
13
19
7
29
Lubricate
98
10. Attach the Seat (18) to the Bench Frame (19) with
two M6 x 16mm Screws (6).
11. Press 3/4Ó Round Inner Caps (25) into the ends of
the three Pad Tubes (27).
Insert a Pad Tube (27) into the indicated hole in the
Leg Lever (23). Insert another Pad Tube into the
other hole in the Leg Lever. Insert the remaining
Pad Tube into the hole in the Front Leg (20).
Slide two Foam Pads (26) onto each Pad Tube (27).
10
11
ADJUSTING THE WEIGHT BENCH
The weight bench is designed to be used with your own weight set (not included). The steps below explain how
the weight bench can be adjusted. See EXERCISE GUIDELINES on page 11 for important exercise information.
Refer also to the exercise information accompanying your weight set (not included) for additional exercises.
Inspect and tighten all parts each time you use the weight bench. Replace any worn parts immediately. The
weight bench can be cleaned with a damp cloth and a mild, non-abrasive detergent. Do not use solvents.
ATTACHING WEIGHTS TO THE LEG LEVER
To use the Leg Lever (23), make sure that the Weight Stop
(28) is on the weight tube. Then, slide the desired amount
of weight (not included) onto the weight tube.
ADJUSTING THE BACKREST
The Backrest (15) can be set at three different positions:
the incline position, the level position, and the decline
position.
To change the position of the Backrest (15) to either the
incline position or the level position, move the Adjustment
Tube (13) to a different set of adjustment brackets on the
Left and Right Uprights (1, 22). Set the Backrest onto the
Adjustment Tube.
To change the position of the Backrest (15) to the decline
position, remove the Adjustment Tube (13). Set the
Backrest on the Bench Frame (19).
LOCKING THE BARBELL
To change weights whilst your barbell (not included) is on
the Uprights (1, 22), secure your barbell with the Barbell
Lock Pins (17, 30). This will reduce the possibility of the
barbell tipping whilst you change weights. Place the same
amount of weight on both ends of the barbell.
23
15
1
19
22
13
Adjustment
Brackets
Weight
Tube
Weight
28
18
6
19
25
25
26
26
26
27
27
27
23
20
26
26
Barbell
22
1
17
30
12. Make sure that all parts have been tightened properly. The use of all remaining parts will be explained in
ADJUSTING THE WEIGHT BENCH, beginning on page 9 of this manual.
Loading...