Weider 831150741 Owner’s Manual
Model No. 831,150741
Serial No.
Wdte the serial number in the space
above for future reference.
Serial Number Decal (Under Seat)
_- X EC F_ C I _S E
EQUIPMENT
|_n, Ji :i_.--.nli i:-a _is. 1
USER'S MANUAL
SEARS, ROEBUCK AND CO.,
HOFFMAN ESTATES, IL 60179
www.weiderfitness.co m
new products, prizes,
fitness tips, and much more!
WARNING DECAL PLACEMENT ........................................................... 2
IMPORTANT PRECAUTIONS .............................................................. 3
BEFORE YOU BEGIN ................................................................... 4
PART IDENTIFICATION CHART ............................................................ 5
ASSEMBLY ........................................................................... 6
USING THE WEIGHT BENCH ............................................................. 9
EXERCISE GUIDELINES ................................................................ 11
PART LIST ........................................................................... 14
EXPLODED DRAWING ................................................................. 15
ORDERING REPLACEMENT PARTS ................................................ Back Cover
FULL 90 DAY WARRANTY ........................................................ Back Cover
The decal shown at the right has
been applied to the weight bench.
If the decal is missing, or if it is
not legible, please call our toll-free
HELPLINE at 1-800-736-6879,
Monday through Saturday, 7 a.m.
until 7 p.m. Central Time (exclud-
ing holidays), to order a free
replacement decal. Apply the
replacement decal in the location
shown.
• Misuseofthisproduct
may result inserious
injury.
• Read user's manual
and follow all warnings
and operating instruc-
tions prior to use.
• Do not allow children
on or around machine.
• Replace label if
damaged, illegible,or
removed.
2
thai
quately informed of all precautions.
3. Use the we_
this manual
4. Use 1:he weight bench on'¥
Corot the floor beneatt3
_irotectien,
3
ThankyouforselectingtheWELDERePRO800
Weight Bench. The versatile WELDER" PRO 800
Weight Bench is designed to be used with your own
weight set (not included) to develop every major mus-
cle group of the body. Whether your goal is a shapely
figure, dramatic muscle size and strength, or a healthi-
er cardiovascular system, the WELDERe PRO 800 will
help you to achieve the specific results you want.
For your benefit, read this manual carefully before
using the WELDER ®PRO 800 Weight Bench. If you
have additional questions, please caTlour toll-free
Upright
HELPLINE at 1-800-736-6879, Monday through
Saturday, 7 a.m, until 7 p.m. Central Time (excluding
holidays). To help us assist you, please note the prod-
uct model number and serial number before calling.
The model number is 831.150741. The serial number
can be found on a decal attached to the weight bench
(see the front cover of this manual).
Before reading further, please look at the drawing
below and familiarize yourself with the parts that are
labeled,
Weight Rests
Curl
Pad
Weight
Tube
Adjustment
Knob
Backrest
.Seat
Leg Lever
4
This chart is provided to help you identify the small parts used in assembly. The number in parenthesis below
each part refers to the key number of the part. The second number refers to _e quantity needed for assembly.
Important: Some parts may have been pre-assembled for shipping purposes, If you cannot find a part in
the parts bags, check to see if it has been p_-assembled.
MIO x 81mm Bolt (35)--10
MIO x 72mm Bolt (40)---1
M6 Washer (25)---4
MIO x 65ram Bolt (18)--2
M8 Washer (38)--2
M8 x 58mm Bolt (39)--1
M6 x 38mm Screw (16)---4
I
!
M6 x 16mm Screw (15)---6
M8 Nylon Locknut (13)-1
w
M4 x 16mm Screw (34)--4.
MIO Washer (24)--4
@S
©
Spacer (37)-1
M10 NylonLocknut (19)-14
5
Loading...