WEG Electric SSW05 Catalog Page
SSW05
Soft Starter
Soft Starters
SSW05
The WEG SSW05 Soft Starter is a super compact fully digital soft
starter with a state-of-the-art DSP controller. Its digital construction
provides optimum operation, diagnostics capability and full motor
protection. Simplicity in set-up and operation is assured since all
parameters and set-up selections are made via dip switches and
potentiometers. Status LED’s alert the user of the operational status
of the SSW05. Simplicity, ease of set-up, and the micro size
assures quick and easy installation and operation.
www.weg.net
Applications
g
Pumps
g
Fans
g
Blowers
g
Compressors
Standard Features
g
208 - 480V, 50/60Hz input power supply
g
Duty cycle: 300% rated current during 10 seconds,
4 starts per hour
g
Built-in bypass contacts
g
One digital input for Start/Stop (90 - 250 Vac)
g
One digital input for Fault Reset (90 - 250 Vac)
g
One relay output for Run indication (1 Amp - 250V)
g
One relay output for Full Voltage indication (1 Amp - 250V)
g
RS-232 serial port
g
Adjustable acceleration and deceleration ramps
(1 - 20 seconds)
g
For high inertia loads, see SSW07 product line.
g
Adjustable pedestal voltage (30 - 80% of line voltage)
g
Protective features: Motor overload, over current and lo-
cked rotor, SCR overload, phase loss and phase sequence
g
DIN rail or direct mount
g
Ambient: 32ºF (0ºC) to 131ºF (55ºC), 3300ft (1000m) alti-
tude, 90% non-condensing humidity
Optional Features
g
Remote Keypad
g
PC Programming
Software
SOFT STARTERS
WEG Automation - Products and Solutions 79
Loading...