WEG Electric SSW03 Catalog Page
SSW03
Soft Starter
www.weg.net
Soft Starters
SSW03
WEG SSW03 Soft Starters are built to match the ruggedness and
reliability of WEG motors, providing a complete and cost effective
solution. Full microprocessor based control allows easy adjustment
through the keypad during start-up, and complete motor protection.
A specific pump control feature prevents running pumps at no load
and eliminates pipeline water hammer.
SOFT STARTERS
Applications
g
Pumps
g
Fans
g
Blowers
g
Compressors
g
Conveyors
g
Crushers
g
Saws
g
Grinders
g
Escalators
Standard Features
g
208-440V and 460-575V, 50/60Hz input
power supply
g
Duty cycle: 300% of full load current
during 30 seconds every 6 minutes
g
Keypad with LED display
g
Four programmable isolated digital inputs
(24 VDC)
g
Two programmable relay outputs
(1 Amp - 250V)
g
One programmable analog output
g
Protective features: Motor overload (TIMP),
under and over current, power supply phase
loss, motor phase loss, thyristor fault, phase
sequence, soft starter over temperature
and external fault
g
Control features: Pump control, acceleration
and deceleration independently adjustable
ramps, kick start, pedestal voltage, voltage
ramp start, constant current start, bypass
relay, JOG, DC braking, energy saving, autoreset and fault history
g
Display readings: Motor Amps (kW, kVA, PF
and Volts)
g
Ambient: 32oF (0oC) to 104oF (40oC), 3300ft
(1000m) altitude, 90% non-condensing humidity
Optional Features
g
Remote Keypad
g
PC Programming
Software
1-800-ASK-4WEG
70 Data is subject to change without notice.
Loading...