Weed Eater 530163479 User Manual

R Trademark

Please do not return unit to retailer.
Por favor, no devuelva el aparato al lugar de compra.
Veuillez ne pas retourner l’outil au détaillant.

1-800-554-6723

www.weedeater.com

Instruction Manual

Manual de Instrucciones

Manuel d’Instructions

FX25 / XT250

ENGLISH ESPAÑOL

For Occasional Use Only

WARNING:

Read and follow all Safety Rules and Operating Instructions before
using this product. Failure to do so can result in serious injury.

ADVERTENCIA:

Lea el manual de instrucciones y siga todas las advertencias e
instrucciones de seguridad. El no hacerlo puede resultar en lesiones
graves.

A VERTISSEMENT:

Lire le manuel d’instructions et bien respecter tous les avertisse­ments ettoutesles instructions de sécurité. Tout défaut de le faire
pourrait entraîner des blessures graves.

Electrolux Home Products, Inc.
250 Bobby Jones Expressway
Augusta, GA 30907

CopyrightE2002 Electrolux Home Products, Inc.

Electrolux Canada Corporation

6150 McLaughlin Road

Mississauga, Ontario L5R 4C2

530163479 12/5/02

FRANÇAIS

SAFETY RULES

WARNING:

appliances, basic safety precautions must al­ways befollowed to reduce the risk of fire and
serious injury. Read and follow all instruc­tions.

This power unit can be dangerous!

responsible for following instructions and warn­ings on unit and in manual. Read entire instruc­tion manual before using unit! Be thoroughly fa­miliarwiththe controls andtheproperuse of the
unit. Restrict the use of this unit to persons who
have read, understand, and will follow the
instructions and warnings on the unit and in the
manual. Never allow children to operate this
unit.

INSTRUCTION
MANUAL

DANGER:

devices. This unit is designed for line trimmer
use only. Use of any other accessories or at­tachments will increase the risk of injury.

WARNING:

jects violently.Youandotherscan beblinded/in­jured. Wear eye and leg protection. Keep body
parts clear of rotating line.

Eye Protection

Boots

Keep children, bystanders, and animals 50 feet
(15 meters) away. If approached stop unit im­mediately.
If situations occur which are not covered in
this manual, use care and good judgment. If
youneedassistance, contact your authorized
service dealer or call 1-800-554--6723.

OPERATOR SAFETY

Dress properly. Always wear safety glasses

S

or similar eye protection when operating, or
performing maintenance, on your unit (safety
glasses areavailable). Eye protectionshould
be marked Z87.
Always wearface ordustmaskif operation is

S

dusty.
Alwayswearheavy, longpants,longsleeves,

S

boots, andgloves. Wearingsafetylegguards
is recommended.

When using gardening

Operator is

SAFETY INFORMATION

ON THE UNIT

Neveruseblades or flailing

Trimme rline throws ob-

HazardZone

50 ft.

(15 m)

Always wearfoot protection. Do not go bare-

S

foot or wear sandals. Stay clear of spinning
line.
Securehairaboveshoulderlength. Secureor

S

removeloose clothing or clothingwithloosely
hanging ties, straps, tassels, etc. They can
be caught in moving parts.
Being fully covered also helps protect you

S

from debris and pieces of toxic plants thrown
by spinning line.
Stay Alert. Do not operate this unit when you

S

are tired, ill, upset orundertheinfluence ofal­cohol, drugs, or medication. Watch what you
are doing; use common sense.
Wear hearing protection.

S

Never start or run inside a closed room or

S

building. Breathing exhaust fumes can kill.
Keep handles free of oil and fuel.

S

UNIT / MAINTENANCE SAFETY

Disconnect the spark plug before performing

S

maintenance except carburetor adjustments.
Look for and replace damaged or loose parts

S

before each use. Look for and repair fuel
leaks before use. Keep in good working
condition.
Replace trimmerheadpartsthat arechipped,

S

cracked, broken, or damaged in any other
way before using the unit.
Maintain unit accordingtorecommended pro-

S

cedures. Keep cutting line at proper length.
Use only 0.080!(2 mm) diameter Weed Eat-

S

er"brand line. Never use wire, rope, string,
etc.
Install required shield properly before using

S

the unit. Use only specified trimmer head;
makesureit is properly installed andsecurely
fastened.
Make sure unit is assembled correctly as

S

shown in this manual.
Make carburetor adjustments with lower end

S

supported to prevent line from contacting any
object.
Keep others away when making carburetor

S

adjustments.
Use only recommended Weed Eater"ac-

S

cessories and replacement parts.
Have all maintenance and service not ex-

S

plained inthismanualperformedbyanautho­rized service dealer.

FUEL SAFETY

Mix and pour fuel outdoors.

S

Keep away from sparks or flames.

S

Use a container approved for fuel.

S

Do not smoke or allow smoking near fuel or

S

the unit.
Avoidspilling fuel oroil. Wipe up all fuelspills.

S

Move at least 10 feet (3 meters) away from

S

fueling site before starting engine.
Stop engine and allow to cool before remov-

S

ing fuel cap.
Always store gasoline in a container ap-

S

proved for flammable liquids.

2

CUTTING SAFETY

WARNING:

each use. Remove objects (rocks, broken
glass, nails, wire, etc.) which can be thrown
by or become entangled in line. Hard objects
can damage the trimmer head and be thrown
causing serious injury.

Use only for trimming, scalping, mowing and

S

sweeping. Do not use for edging, pruning or
hedge trimming.
Keep firm footing and balance. Do not over-

S

reach.
Keep all parts of your bodyawayfrommuf fler

S

and spinning line. Keep engine below waist
level. A hot muffler can cause serious burns.
Cut from yourrighttoyourleft. Cutting on left

S

side of the shield will throw debris away from
the operator.
Use only in daylight or good artificial light.

S

Use only for jobs explained in this manual.

S

Inspect the area before

TRANSPORTING AND STORAGE

Allow engine to cool; secure unit before stor-

S

ing or transporting in vehicle.
Empty the fuel tank before storing or trans-

S

portingtheunit.Useup fuelleftinthe carbure­torbystartingtheengineand letting it rununtil
it stops.
Store unit and fuel in area where fuel vapors

S

cannot reachsparksor openflamesfromwa­ter heaters, electric motors or switches, fur­naces, etc.
Store unit so line limiter blade cannot acci-

S

dentally cause injury. The unit can be hung
by the tube.
Store unit out of reach of children.

S

SAFETY NOTICE:

through prolonged use of gasoline powered
hand tools could cause blood vessel or nerve
damage in the fingers, hands, and joints of
people prone to circulation disorders or ab­normal swellings. Prolonged use in cold
weather has beenlinked tobloodvesseldam­age inotherwise healthy people. Ifsymptoms
occur such as numbness, pain, loss of
strength, change in skin color or texture, or
loss of feeling in the fingers, hands, or joints,
discontinue the use of this tool and seekmed­ical attention. An anti--vibration system does
not guarantee the avoidance of these prob­lems. Users who operate power tools on a
continual and regular basis must monitor
closely their physical condition and the condi­tion of this tool.

SPECIAL NOTICE:

with a temperature limiting muffler and spark
arresting screen which meets the require­ments of California Codes 4442 and 4443. All
U.S. forest land and the states of California,
Idaho, Maine, Minnesota, New Jersey, Ore­gon, and Washington require by law that
many internal combustion engines be
equipped with asparkarresting screen. Ifyou
operate inalocale where such regulations ex­ist, you are legally responsible formaintaining
the operating condition of these parts. Failure
to do so is a violation of the law. For normal
homeowner use, the muffler and sparkarrest­ing screen will not require any service. After
50 hours of use, we recommend that your
muffler beserviced orreplaced byyourautho­rized service dealer.

Exposure to vibrations

This unit is equipped

ASSEMBLY

WARNING:

repeat all steps to ensure your unit isproperly
assembled and all fasteners are secure.

Examine parts for damage. Do not use dam­aged parts.

NOTE:

missing or damaged, call 1-800-554-6723.
It is normal for the fuel filter to rattle in the

empty fuel tank.
Finding fuel or oil residue on muffler is normal

due to carburetor adjustments and testing
done by the manufacturer.

If you need assistance or find parts

ADJUSTING THE HANDLE

WARNING:

dle, be sure it remains between the trigger
and the safety label.

1. Loosen wing nut on handle.

2. R otate the handle on the tube to an upright
position; retighten wing nut.

ATTACHING SHIELD

WARNING:

erly installed. The shield provides partial

If received assembled,

When adjusting the han-

The shield must beprop-

protection from the risk of thrown objects to
the operator and others and is equipped with
a line limiter blade which cuts excess line to
the proper length. The line limiter blade (on
underside of shield) is sharp and can cut you.

For proper orientation of shield, see KNOW
YOURTRIMMERillustration in OPERATION
section.

1. R emove wing nut from shield.

2. Insert bracket into slot as shown.

3. Pivotshielduntilboltpasses throughholein
bracket.

4. Securely tighten wing nut onto bolt.

Slot

Shield

Bracket

Wing

Line Limiter Blade

Nut

3

OPERATION

KNOW YOUR TRIMMER

READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR UNIT.

Comparethe illustrations withyourunit to familiarizeyours elfwith the location of the variouscon tr o ls

and adjustments. Save this manual for future reference.

Assist Handle

Tube

Trimmer

Muffler

Starter
Handle

ON/STOP
Switch

Throttle
Trigger

Spark Plug

Choke Lever

Primer Bulb
Fuel Mix

Fill Cap

Shield

Head

Line
Limiter
Blade

ON/STOP SWITCH

TheON/STOPswitch is used tostop engine.To
stop the engine, push and release the engine
ON/STOP switch.

PRIMER BULB

The PRIMER BULB removes airfromthe car­buretor and fuel lines and fills them with fuel.
This allows you to start the engine with fewer
pulls on the starter rope. Activate the primer
bulb by pressing it and allowing it to return to
its original form.

BEFORE STARTING ENGINE

WARNING:

information in the safety rules before you
begin. If you do not understand the safety
rules, do not attempt to fuel your unit. Call
1-800-554-6723.

Be sure to read the fuel

FUELING ENGINE

WARNING:

when refueling.
This engine is certified to operate on unleaded

gasoline. Before operation, gasoline must be
mixed with a good quality synthetic 2-cycle
air-cooled engine oil designed to be mixed at a
ratio of 40:1. Poulan/Weed Eater brand
synthetic oil is recommended. Mix gasoline and
oilataratio of 40:1. A 40:1 ratio is obtained by
mixing 3.2 ounces (95 ml)of oil with1 gallon(4
liters) of unleaded gasoline. DO NOT USE
automotive oil or boat oil. These oils will cause
engine damage. When mixing fuel, follow
instructions printed on container. Once oil is
addedtogasoline,shakecontainer momentarily
to assure that the fuel is thoroughly mixed.

Remove fuel cap slowly

CHOKE

The CHOKE helps to supply fuel to the engine
to aid in cold starting. Activate the choke by
moving the choke lever to the FULL CHOKE
position. Aftertheengineattempts to start,move
the choke lever to the HALF CHOKE position.
Once engine hasstarted, movethechokelever
to the OFF CHOKE position.

Always read and follow the safety rules relating
to fuel before fueling your unit.

IMPORTANT

Experience indicates that alcohol blended
fuels (called gasohol or using ethanol or
methanol) can attract moisture which leads to
separation and formation of acids during stor­age. Acidic gas can damage the fuel system
of an engine while in storage.
Toavoid engine problems, emptythefuelsys­tem before storage for 30 days or longer.
Drain the gas tank, start the engine and let it
run until the fuel lines and carburetor are
empty. Use fresh fuel next season.
Never use engine or carburetor cleaner prod­ucts in the fuel tank or permanent damage may
occur. See the STORAGE section for addi­tional information.

HOW TO STOP YOUR UNIT

To stop the engine, push and release the

S

engine ON/STOP switch. The switch will
automatically return to the ON position.
Wait 5 seconds before attempting to restart
unit to allow switch to reset.
If engine does not stop, move choke to the

S

FULL CHOKE position.

4