Weed Eater WEF350B, 152166 User Manual
Specifications and Main Features
- Model Number: WEF350B
- Horsepower: 3.5 HP
- Displacement: 12.57 cu. In. (206 cc)
- Fuel Type: 3 Quarts (2.8L) Unleaded Regular
- Specification for Oil:
- API-SF/SG: SAE 30 (More than 32 degrees F/ 0 degrees C)
- SAE 5W-30 (Less than 32 degrees F/ 0 degrees C)
- Oil Capacity: 20 oz (0.6L)
- Type of Spark Plug: Champion RUTSLM
- Spark Plug Gap: .030” (0.76mm)
- Width of Tilling: 17inches
- Adjustable Handle Height: Available
- Depth Stake Adjustment: Available
- Tine Operation: Engaged through tine control
- Engine: Air Cooled Engine
- Safety Features: ANSI requirements for safety are met
- Maintenance Schedule: Monthly checks are recommended for oil level, spark plug and air cleaner condition
Frequently Asked Questions
Q1: What type of fuel should be used in the tiller?
A1: Use the regular unleaded gasoline that is clean and fresh.
Q2: How often should the oil be changed?
A2: After the first two hours of tiller operation, the oil should be changed then subsequently, after every 25 hours of operation or once a year if the tiller has been idle for a year and has accumulated less than 25 hours of operation.
Q3: What is the recommended spark plug for the engine?
A3: The specified trust is Champion RUTSLM.
Q4: What methods can I employ to calibrate the tilling mechanism in greater, or lesser depth?
A4: Alterations for the depth increments can be made by taking off the hairpin clip and clevis pin. All that needs to be done next is move the depth stake towards the direction of your desired increment and then put the clevis pin and hairpin clip back in place.
Q5: The tiller doesn’t seem to want to start, how do I solve that problem?
A5: There are a number of different factors to check such as the amount of fuel present, its choke position and how well spark plug connections are set. If a greater and more detailed set of instructions is required reference the troubleshooting guide located in the manual.
User Manual
Loading...