TECHNIC AL D AT A SHEET
Special marking according t o drawing
Pleas e r ef er to our websi te for t h e full d i sc l ai m e r.
950-T(-DS)
PCB connector
Screw connection, interlocking
GENERAL INFO RMATION
Pitch 5 mm
No. of poles 2 + 3
TECHNICAL DATA
Clamping Range solid / stranded / AWG
without wire protector 0,75 - 4 mm² / 0,75 - 2,5 mm² / 18 - 12 AWG
with wire protector 0,34 - 2,5 mm² / 0,34 - 2,5 mm² / 22 - 14 AWG
Rated Cross Sec tion 1,5 mm²
Wire Stripping Length 6 mm ± 0,5 mm
Overvoltage Category III III II
Pollution Severity Level 3 2 2
Rated Voltage 160 V 160 V 320 V
Rated Impulse Voltage 2,5 kV 2,5 kV 2,5 kV
Rated Current 17,5 A
Hole in PCB ø 1,3 mm
Torque 0,4 Nm
104,2
0,7
5
4
MATERIAL
Moulding PA, grey, V-0
Comparative Tracking Index CTI ≥ 600
Insulating Group I
Temperature Range -40°C up to 100°C
Terminal body Tin plated brass
Screw M2,6; zinc plated steel, blue pass ivated
Solder pin ø 1 mm; tin plated copper alloy
Wire protector Tin plated tin bronze
APPROVALS
Current [A] Voltage [V] Group AWG [Nm]
15 300 B 26 - 14 0,4
15 300 B 26 - 14 0,4
Current [A] Voltage [V] mm²
17,5 160 1,5 [1]
OPTIONS / ACCESSORIES
Consecutive number ing
•
Self-adhesive mark ing s trip BST-5,00
•
Longer solder pins up to 75 mm
•
[1] Acc. to IEC 60947-7-4 und IEC 60947-1
CONFIGURATIONS
Poles Part number Article number Part number Article number Length (L) Pac k aging PU
2 950-T/02 10.871.602 950-T-DS/02 20.871.602 10,00 mm Box 250
3 950-T/03 10.871.603 950-T-DS/03 20.871.603 15,00 mm Box 250
11.17
Information pro vide d in t his docu men t ma y be c hange d w it hou t p rior not ice.
All rightsreserved.WECO®is a brandofthe WECO Group.