Wecan E-STUDIO202L, E-STUDIO232L, E-STUDIO282L, E-STUDIO203L, E-STUDIO233L Operator's Manual For Basic Function

...
Page 1
T:+2(02)26711737
M:+2(02)01111134509
MULTIFUNCTIONAL DIGITAL SYSTEMS
Operator's Manual
for Basic Function
32 Abo Haya El Tawhedy, Aria 7, Nasr City, CAIRO.
T:+2(02)22758997
WWW.WECAN-EG.COM
Page 2
T:+2(02)26711737
M:+2(02)01111134509
Main components
1. Front cover 8. Original glass
2. Drawers 9. Original scale
3. Drawer (e-STUDIO232/282) 10. Inner tray Slot cover (e-STUDIO202L) 11. Control panel
4. Operator’s manual pocket (back side) 12. Touch panel
5. Power switch 13. Touch panel contrast adjustment dial
6. Automatic duplexer 14. Toner cartridge(standard on the e-STUDIO232/282, optional
7. Bypass tray
*A and B: Options
32 Abo Haya El Tawhedy, Aria 7, Nasr City, CAIRO.
for the e-STUDIO202L)
T:+2(02)22758997
WWW.WECAN-EG.COM
Page 3
T:+2(02)26711737
M:+2(02)01111134509
Control panel
1. [HELP] button Use this button to display the description of the functions and the buttons on the touch panel.
2. [USER FUNCTIONS] button Use this button for paper size or media type setting of drawers, and registration of the copy, scan and FAX settings (including a default setting change.) See the User Functions Guide for the functions enabled by this button.
3. [TEMPLATE] button Use this button to register and recall frequently used copy, scan, and Fax settings as a template.
4. [EXTENSION] button Any operation with this button is invalid at present. This button is to extend functions in the future.
5. [e-FILING] button Use this button to access saved image data.
6. [SCAN] button Use this button to use the scanning function.
7. [COPY] button Use this button to use the copier function.
8. [FAX] button Use this button to use the FAX / Internet FAX function.
9. PRINT DATA / MEMORY RX / FAX communication lamps These lamps show the status of FAX data reception and FAX communication. The equipment can be
10. [INTERRUPT] button Use this button to interrupt the copy job in process and perform another one. The interrupted job is resumed by your pressing this button again.
11. [JOB STATUS] button Use this button to confirm the job status, printing status, and FAX transmission/reception status of a print job, scan job and FAX job. (P.240 “1.Job Status”)
12. [ACCESS] button Use this button when the department code or user information has been set. If this button is pressed after copying, the next user cannot use functions such as copying without keying in the department code or user information. See the User Functions Guide for the department and user management.
13. [ENERGY SAVER] button Use this button when you want to shut down the equipment or when you want the equipment to enter
32 Abo Haya El Tawhedy, Aria 7, Nasr City, CAIRO.
T:+2(02)22758997
WWW.WECAN-EG.COM
Page 4
T:+2(02)26711737
M:+2(02)01111134509
into the energy saving mode. When you press this button, the menu for the energy saving mode appears. Press the [SLEEP] button on this menu to enter into the energy saving mode and press the [SHUTDOWN] button to shut down the equipment.
14. [FUNCTION CLEAR] button When this button is pressed, all selected functions are cleared and returned to the default settings. If the default setting is changed on the control panel, and copying, scanning, Fax or similar is performed, the [FUNCTION CLEAR] button blinks.
15. [STOP] button Use this button to stop any scanning and copying operations in progress.
16. [START] button Use this button to start copying, scanning and FAX operations.
17. [CLEAR] button Use this button to correct numbers keyed in, such as the copy quantity.
18. ERROR lamp This lamp lights when an error occurs and the equipment needs some actions to be taken.
19. [MONITOR/PAUSE] button Use this button only when a FAX Unit (optional) is installed. (See the Operator’s Manual for Facsimile Function for details.)
20. Digital keys Use these keys to enter any numbers such as the copy quantity.
21. Touch panel Use this panel for the various settings of each function of the copier, scanner and FAX. This panel also
indicates the status of the equipment, such as when you run out of paper or there is a paper jam.
32 Abo Haya El Tawhedy, Aria 7, Nasr City, CAIRO.
T:+2(02)22758997
WWW.WECAN-EG.COM
Page 5
T:+2(02)26711737
M:+2(02)01111134509
Touch panel
When the power is turned on, the basic menu for the copier function appears on this touch panel. The status
of the equipment is also displayed on the touch panel with messages and illustrations.
1. Message 10. Original mode button
2. Reproduction ratio 11. [PROOF COPY] button
3. Number of copy sets 12. Density adjustment buttons
4. APS/AMS* or currently selected paper size 13. Simplex / duplex button
5. Remaining paper level 14. Paper source selection buttons
6. Date and time 15. Equipment status indication area
7. [SETTINGS] button 16. Function setting area
8. Finisher button 17. Index buttons
9. Enlargement/Reduction ([Zoom...]) butt
32 Abo Haya El Tawhedy, Aria 7, Nasr City, CAIRO.
T:+2(02)22758997
WWW.WECAN-EG.COM
Page 6
T:+2(02)26711737
M:+2(02)01111134509
Placing paper in the drawer
32 Abo Haya El Tawhedy, Aria 7, Nasr City, CAIRO.
T:+2(02)22758997
WWW.WECAN-EG.COM
Page 7
T:+2(02)26711737
M:+2(02)01111134509
Blinking Graphic Symbols
1. Error code
2. Guidance display area
3. Illustration of the equipment
4. Replace toner cartridge symbol (P.280 “3.Replace Toner Cartridge Symbol”)
5. Jam symbol (P.286 “4.Jam Symbols”)
6. Call service symbol (P.302 “5.Call Service Symbol”) When one of the graphic symbols 4 to 6 blinks, take the appropriate action referring to the indicated
pages.
32 Abo Haya El Tawhedy, Aria 7, Nasr City, CAIRO.
T:+2(02)22758997
WWW.WECAN-EG.COM
Page 8
T:+2(02)26711737
M:+2(02)01111134509
Jam Symbols
1. Reversing Automatic Document Feeder (optional) (P.286)
2. Fuser Unit (P.293)
3. Automatic Duplexer (P.291)
4. Bypass tray (P.291)
5. Drawer feeding area (P.289)
6. Large Capacity Feeder (optional) (P.290)
7. Jam releasing cover (P.292)
8. Bridge Unit (optional) (P.296)
9. Saddle Stitch Unit of Saddle Stitch Finisher (optional) (P.300)
10. Hole Punch Unit (optional) (P.297)
11. Finisher (optional) (P.298)
12. Hanging Finisher (optional) (P.299)
13. Staple Unit (optional) (P.300)
32 Abo Haya El Tawhedy, Aria 7, Nasr City, CAIRO.
T:+2(02)22758997
WWW.WECAN-EG.COM
Page 9
T:+2(02)26711737
M:+2(02)01111134509
REMOVE JAM FROM RADF
32 Abo Haya El Tawhedy, Aria 7, Nasr City, CAIRO.
T:+2(02)22758997
WWW.WECAN-EG.COM
Page 10
T:+2(02)26711737
M:+2(02)01111134509
REMOVE JAM
32 Abo Haya El Tawhedy, Aria 7, Nasr City, CAIRO.
T:+2(02)22758997
WWW.WECAN-EG.COM
Page 11
T:+2(02)26711737
M:+2(02)01111134509
REMOVE JAM FROM ADU
32 Abo Haya El Tawhedy, Aria 7, Nasr City, CAIRO.
T:+2(02)22758997
WWW.WECAN-EG.COM
Page 12
T:+2(02)26711737
M:+2(02)01111134509
REMOVE JAM FROM FUSER
32 Abo Haya El Tawhedy, Aria 7, Nasr City, CAIRO.
T:+2(02)22758997
WWW.WECAN-EG.COM
Page 13
T:+2(02)26711737
M:+2(02)01111134509
Weekly cleaning
32 Abo Haya El Tawhedy, Aria 7, Nasr City, CAIRO.
T:+2(02)22758997
WWW.WECAN-EG.COM
Loading...