Weber iGrill 3 User manual
User Manual
Bluetooth® Connected Thermometer
Table of Contents
In the Box 3
Quick Start Instructions 3
Getting Started 4
Weber iGrill App 4
Battery Replacement 5
Powering On & Off 5
Connecting 6
Disconnecting 7
Mounting 7
Probe Use 8
Probe Wrap Use 9
Using the iGrill 3
Display 9
Proximity Sensor 9
Custom & Preset Alarms 10
Setting Up A Cook 10
Preset Alarms for Different Types of Meats 11
Creating a Custom Preset 11
Pre-Alarm Notication 12
9
Renaming Probes 12
Timer Tool 13
Globe Tool 13
Graph Tool 13
Fuel Gauge 13
Lighted Control Knobs 14
Problem Solving 14
Disclaimer 18
Regulations 18
In the Box
Inside your iGrill 3 box, you will nd:
• 1 iGrill 3
• 1 Battery Pack Assembly
• 3 AA Batteries
• 2 Pro Meat Probes
• 2 Probe Wraps
• 2 Colored Probe Indicators (Yellow and Red)
• 1 Magnetic Fuel Level Sensor Assembly
• Installation and Quick Start Guide
Quick Start Instructions
1. Follow the installation guide included to mount the iGrill 3 to the
right side table of your Genesis® II or Genesis® II LX grill.
2. Conrm the AA batteries that are supplied with your iGrill 3
are inserted in the battery pack with their negative terminals
compressing the springs. Conrm wire connections are secure.
3. Download the Weber iGrill App from the App Store® or Google
PlayTM Store on one of the following compatible devices:
• iPhone® (4S and later)
• iPad® (3rd generation and later)
• iPad mini™ (all generations)
• iPod touch® (5th generation and later)
• Many Android™ devices equipped with Bluetooth® 4.0 and
running Android™ software version 4.3 or later
4. Enable Bluetooth® on your smart device under ‘Settings.’
3
5. Open the door on the front of the iGrill 3 to expose the probe ports.
6. Plug one or more probes into the probe ports of the iGrill 3.
7. Press the power button located at the front of the faceplate once.
The display will ash, indicating that the iGrill 3 has powered on and
is ready to pair.
8. Open the Weber iGrill App to connect to your iGrill 3. Tap on the
white iGrill logo in the black toolbar at the top of the app. Select
your iGrill 3 from the ‘Available Devices’ drop-down.
9. You are now ready to use your iGrill 3!
Getting Started
Weber iGrill App
The Weber iGrill App provides all of the functionality and customization
you will need to get the most out of your iGrill 3. The Weber iGrill App is
compatible with the following devices:
• iPhone® (4S and later)
• iPad® (3rd generation and later)
• iPad mini™ (All generations)
• iPod touch® (5th generation and later)
• Many Android™ devices equipped with Bluetooth® 4.0 and running
Android™ software version 4.3 or later
You must be running iOS 7+ or Android™ version 4.3 or later on your
device to use the Weber iGrill App. Please visit the App Store® or Google
Play™ Store and search “Weber iGrill” to download the free Weber iGrill
App.
Once you have downloaded the app, you will have access to links
for instructional videos, step-by-step instructions and FAQs for
troubleshooting.
4
Battery Replacement
To replace your iGrill 3 batteries, follow these steps:
• Locate the battery pack mounted underneath, and to the rear, of the
right side table of your grill.
• Separate the battery pack from its mounting bracket by gently
pulling it forward.
• On the back of the battery pack, press down on the tab and remove
the battery door.
• Replace the three AA batteries with their negative terminals
compressing the springs and replace the battery door.
• Snap the battery pack into the mounting bracket under the side
table of your grill.
Battery Precautions:
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon zinc) or rechargeable (ni-cad,
ni-mh, etc.) batteries.
• Dispose of spent or damaged batteries according to manufacturer
instructions and local laws.
Powering On & Off
To turn the iGrill 3 on, follow these steps:
• Press the power button located at the front of the faceplate.
• The display will ash, and a single beep will be heard, indicating
that the iGrill 3 has powered on.
To turn the iGrill 3 off, follow these steps:
• Press and hold down the power button located at the front of the
faceplate for several seconds. A double beep will be heard.
• Upon releasing the power button, the iGrill 3 will turn off.
5
Auto Shut-Off:
• The iGrill 3 will stay powered on for ve minutes before
automatically turning off if there are no probes installed and if it is
not paired to a smart device.
• The iGrill 3 will stay powered on for eight hours before automatically
turning off if not paired to a smart device and if probes are installed.
• The iGrill 3 will stay powered on indenitely if at least one probe is
installed and if it is paired with a smart device.
Connecting
To connect your iGrill 3 to your iPhone®, iPad®, iPod touch® or Android™
device follow these steps:
• Open Settings.
• Tap Bluetooth®.
• Set Bluetooth® to On.
• Turn on your iGrill 3 and open the Weber iGrill App with your smart
device. Your smart device will automatically recognize any available
iGrill products and display them in the ‘Available Devices’ dropdown. You can view the ‘Available Devices’ by tapping the white
iGrill logo at the top, right-hand corner of the app.
• Select your iGrill 3 from the ‘Available Devices.’ You will then be
prompted to accept a pairing request. Once you accept, your smart
device will pair with the iGrill 3 and you are ready to congure your
settings and start grilling!
To connect an additional iGrill product to your iPhone®, iPad®, iPod touch®
or Android™ device, follow these steps:
• While turned on, place your other iGrill product next to your smart
device and open the Weber iGrill App.
• Tap on the white iGrill logo located at the top of the app to expose
the ‘Available Devices’ drop-down. Select the product you would
like to pair with from the ‘Available Devices.’ Your smart device will
display a pairing request. Once accepted, your smart device will
pair with the additional product you choose. Now you are ready to
congure your settings and start grilling!
6
Loading...