ENGLISH
BASIC OPERATION GUIDE
DS1500/ DS1700
Signage System
INTRODUCTION
Thank you for acquiring the DT Research
WebDT DS1500/ 1700, a 15-inch (WebDT
DS1500) or 17-inch (WebDT DS1700)
all-in-one signage system, providing an
integrated computing display in one slim,
mountable package; ideal for digital signage and kiosk applications.
Operating with the Microsoft® Windows® XP Embedded system, the WebDT DS1500/ 1700 offers
remote management of the content and device with WebDT Content Manager and WebDT
Device Manager software. This fully integrated solution of hardware and software, with touch
and point-of-service options, facilitates efcient deployments and brings dynamic interaction to
the audience.
Please take a few moments to review the contents of this document to ensure that the setup
and startup proceed smoothly. The WebDT DS1500/ 1700 is ready for use, out of the box, in its
default conguration when powered by the power source provided. The following discussion
offers guidance on the hardware elements and features of the WebDT DS1500/ 1700. Please
refer to your device provider for information pertaining to the software operating system or
software applications.
PACKAGE CONTENTS
W
• ebDT DS1500/ 1700 Signage System
A
• C/DC Power Adapter with Power Cord
B
• asic Operation Guide
PRECAUTIONS
Always exercise care when operating and handling the WebDT DS1500/ 1700.•
Never disassemble any portion of the enclosure, as this will void any product warranty on the •
WebDT DS1500/ 1700.
Do not use any AC/DC adapter other than the one provided with the device or a replace-•
ment acquired from the manufacturer.
I
• n the unlikely event that smoke, abnormal noise, or strange odor is present, immediately
power down the WebDT DS1500/ 1700 and disconnect all power sources. Please report the
problem to your device provider immediately.