Programmable Control Panel Operating Instructions
Dual Top Evo 6
Content Dual Top Evo 6
Content
1 Introduction ............................................................................................ 3
1.1 Additional documentation to be used .............................................. 3
2 Function description ............................................................................... 4
2.1 Summer mode (hot water only) ....................................................... 4
2.2 Winter mode (heating without hot water production) ..................... 4
2.3 Winter mode (heating with hot water production) ........................... 5
2.4 Advanced functions ......................................................................... 5
3 Operating Instructions ........................................................................... 6
3.1 General information ........................................................................ 6
3.1.1 Control Panel.................................................................................... 6
3.2 Before you start ............................................................................... 8
3.3 Normal operation ............................................................................ 8
3.3.1 Appliance is switched off.................................................................. 8
3.3.2 Switching on the heater.................................................................... 8
3.3.3 Switching off the heater ................................................................... 9
3.3.4 Setting desired interior temperature.................................................. 9
3.3.5 Summer mode (hot water only) ...................................................... 10
3.3.6 Winter mode (heating without hot water production)..................... 11
3.3.7 Winter mode (heating with hot water production) .......................... 11
3.3.8 Heating while driving...................................................................... 12
3.4 Settings setup ............................................................................... 13
3.4.1 Day, date, time ............................................................................... 13
3.4.2 Language, temperature unit, hour format, display contrast ............. 13
3.5 Programming timer ....................................................................... 14
3.5.1 Program setting .............................................................................. 14
3.5.2 Heating by timer............................................................................. 16
3.6 Remote control ..............................................................................17
3.6.1 Show actual mode...........................................................................17
3.6.2 Enabling and setting Telestart and Thermo Call ...............................17
3.6.3 Disabling Telestart and Thermo Call.................................................18
3.6.4 Start and stop heater operation using Telestart................................18
3.7 Frost ..............................................................................................19
3.7.1 Draining the boiler manually............................................................19
3.7.2 How to stop draining the boiler.......................................................20
3.7.3 Draining the boiler automatically .....................................................20
3.7.4 Frost protection mode .....................................................................21
4 Fault Message Output ..........................................................................22
4.1 Fuses .............................................................................................25
5 Worldwide warranty ............................................................................26
D
Dual Top Evo 6 Introduction
3
1 Introduction
Dear Customer,
Thank you for choosing this programmable Webasto Control Panel for the Integrated
Dual Top Evo Heater.
This product has been especially designed as a control panel for a Dual Top Evo heater
installed in motor homes. Please note that this control panel and the Dual Top Evo
heaters are intended exclusively for use in motor homes or similar vehicles.
An explanation of the mode of operation and function of your Webasto Dual Top Evo
unit is generally provided via the workshop or the Service Centre at which the
installation was carried out.
These operating instructions provides you with an overview of additional information
on using the programmable control panel. If you do not understand any information in
the manuals or if you misplace any of them, please contact your authorised Webasto
dealer immediately.
Please take the time to read this manual carefully. This enables you to use all features
and makes you feel comfortable and safe.
To ensure safe use of the Dual Top Evo heater, ALWAYS read and follow all instructions
in this manual.
It is very important that an authorised Webasto dealer carries out any repair or
maintenance not described in this manual.
1.1 Additional documentation to be used
These operating instructions contain the basic information and instructions generally
required for operating Integrated heaters of the type Dual Top Evo 6 using
programmable control panels.
in addition, the information in additional documentation materials must be observed.
The operating instructions for the Integrated Dual Top Evo 6 heater must also be
observed. These operating instructions are included in the delivery scope of the
Integrated heater, however can also be downloaded at the Internet address
http://dealers.webasto.com
.
Then download the respective instructions as a PDF file in the desired language.
Function description Dual Top Evo 6
4
2 Function description
The Dual Top Evo 6 integrated heater from Webasto combines the benefits of an
interior heater with a water boiler and contributes to a gas-free motor home.
Depending on which function you wish to have, hot water in summer mode, just heat
or heat and hot water in winter mode, several options are available.
2.1 Summer mode (hot water only)
The heater is used for providing hot drinking water. The water is heated up to and kept
at 40 °C or 70 °C.
The device automatically selects the burner setting.
A water temperature sensor controls the water temperature. Due to variable operating
and environmental influences, small water temperature deviations are possible.
The hot air fan for heating the interior is not activated.
2.2 Winter mode (heating without hot water production)
The heater is used for providing hot air.
The desired interior temperature may be adjusted by pushing button (1) or button
(2) (5 to 35 °C).
The device automatically selects the burner setting modulating between 1,500 W and
6,000 W depending on the output requirement (calculated from difference between
selected temperature and current interior temperature).
The amount of heat is regulated to reach the pre-selected interior temperature quickly.
Then only a limited amount of power is needed to hold the interior temperature.
Heating the interior is always possible with or without water in the boiler.
Dual Top Evo 6 Function description
5
2.3 Winter mode (heating with hot water production)
The heater is used for heating the interior and production of hot water.
The heat is generated using a diesel powered burner.
The desired interior temperature may be adjusted by pushing button (1) or button
(2) (5 to 35 °C).
The water is heated up to 70 °C.
The device automatically selects the burner setting modulating between 1,500 W and
6,000 W depending on the output requirement (calculated from difference between
selected temperature and current interior temperature).
The amount of heat is regulated to reach the pre-selected interior temperature quickly.
Then only a limited amount of power is needed to hold the interior temperature.
A water temperature sensor controls the water temperature, while an interior
temperature sensor controls the interior temperature.
Due to variable operating and environmental influences, small water temperature
deviations are possible.
2.4 Advanced functions
• Menu driven user guidance in 6 languages.
• Programmable timer: The device offers two free programmable 7 days, 24 hours
heating programs.
See paragraph 3.5: "Programming timer".
• Remote control by Webasto Telestart and Thermo Call (optional controls).
See paragraph 3.6: "Remote control".
• Boiler drainage: possibility to drain the boiler manually with the control panel or
automatically as frost protection.
See paragraph 3.7: "Frost".
• Frost protection mode: protects the boiler against frost.
See paragraph 3.7.4: "Frost protection mode".
• Textual fault information: when a fault occurs, a fault message is displayed on the
control panel. A number and a brief description inform the user about the kind of
fault. See chapter 4: "Fault Message Output".
Operating Instructions Dual Top Evo 6
6
3 Operating Instructions
3.1 General information
Before starting the heater, observe the information in the operating
instructions for the integrated Dual Top Evo 6 heater (included in the delivery
scope of the integrated heater or available for downloading at the Internet
address http://dealers.webasto.com
) and for the programmable control panel.
Pay particular attention to the sections "Maintenance and Safety Instructions"
and “Maintenance”.
The vehicle owner is responsible for the correct operation of the appliance.
3.1.1 Control Panel
Changes to the settings on the control panel are implemented after a short
delay!
See Fig. 1.
1 = Up - button
2 = Down - button
3 = START/STOP/OK - button
4 = MENU/BACK/CANCEL - button
5 = On/off - button
6 = Power indicator/fault indicator (green / red).
Fig. 1 Control Panel
6
1
2
4
5
3
Dual Top Evo 6 Operating Instructions
7
During normal operation you will see the status display. See Fig. 2.
7 = Indicator Heater ON/Heater OFF
8 = Remote indicator
9 = Drainage indicator
10 = Interior heating/temperature indicator
11 = Water heating/temperature indicator
ad 1 and 2: Press up button (1) to increase and down button (2) to
decrease desired temperature, set correct time and date, etc., move
blinking cursor and to scroll through menu.
ad 6: The power indicator lights up GREEN when the Dual Top Evo is
switched on and START (3) is pressed. Also Heater ON on display (7).
The heater is operating or in the standby mode.
Power indicator is off when STOP (3) is pressed or when Dual Top Evo
is switched off. Also Heater OFF on display (7). The heater is not
operating or is not in the standby mode.
The indicator flashing pulses RED if a fault has occurred.
ad 7: The heater is ON when the Dual Top Evo is switched on and START (3)
is pressed. The heater is operating or in the standby mode.
The heater is OFF when STOP (3) is pressed or Dual Top Evo is switched
off. The heater is not operating or is not in the standby mode.
ad 8: Symbol “ “ appears when device is ready to accept signals of remote
control.
ad 9: The “ ” symbol is shown when the electrical safety/drainage valve is
opened.
ad 10: Desired interior temperature is displayed, not actual temperature.
ad 11: Desired water temperature is displayed, not actual temperature.
Background lighting
The background lighting of the display lights up when the Dual Top Evo equipment is
switched on, no matter if there is heater operation or not.
It will fade out after some minutes if no button is pressed.
Backlight will light up again after pressing or .
NOTE
The display may become darker when the temperature of the control panel becomes
very high or when it is placed in direct sunlight.
Avoid that the control panel is exposed to high temperatures or direct sunlight.
In case aforementioned conditions could not be avoided, adjust display contrast in
“ Setup” (see paragraph 3.4.2: "Language, temperature unit, hour format, display
contrast").
Fig. 2 Status display
7 8
9
11
10
Operating Instructions Dual Top Evo 6
8
3.2 Before you start
After connecting the appliance to the 12 V DC power supply, language, day, date and
time have to be set.
1 Press and to select your preferred language:
“Deutsch”, "English”, “Español”, “Français”, “Italiano”, or “Svenska”.
2 Press OK.
3 Press and to select the correct day and date.
4 Press OK.
5 Press and to set the time.
6 Press OK.
Standard settings:
- Hour format: 24 h
- Temperature unit: °C
- Interior temperature: 21 °C
- Remote control: Disabled
- Timer programs: OFF for all 7 days
lower interior temperature T1 = 15 °C,
higher interior temperature T2 = 21 °C
3.3 Normal operation
3.3.1 Appliance is switched off
When the appliance is switched off, display shows ”Webasto Dual Top” as well as
actual time, day and date.
1 hour after switching off and touching buttons for the last time, display will go into
“sleep” mode and will become dark. When any button is touched, display described
above appears again for at least 1 hour.
3.3.2 Switching on the heater
1 Press the On/Off button to switch on the Dual Top Evo.
Display shows the last used heating mode.
*
2Press START.
Then the heater starts up in the indicated operating mode.
Power indicator (6) lights green and “Heater ON” (7) on display.
* Exception: in case the last used heating mode was initiated by remote control
(Telestart or Thermo Call), the last non-remote control heating mode is shown.
Dual Top Evo 6 Operating Instructions
9
3.3.3 Switching off the heater
Proceed as follows to completely switch off the Dual Top Evo:
1 Press the On/Off button to switch off the device.
Now the heater will stop heating.
2 The fan can continue to run after switching off in order to cool down the
heater.
“Shutting down...” on display.
3 After the cooling phase the fan switches off.
For 1 hour the display shows text ”Webasto Dual Top” as well as actual
time, day and date.
Always drain the boiler if there is a risk of frost!
See paragraph 3.7: "Frost".
Stopping heating operation to select another mode:
1 Press STOP.
Now the heater will stop heating.
2 The fan can continue to run after switching off in order to cool down the
heater.
Display shows stopped heating mode.
*
Power indicator (6) goes off and “Heater OFF” (7) on display.
3 Use menu to select another mode.
After the cooling phase the fan switches off.
When after some minutes no button is touched, the display shows text
”Webasto Dual Top” as well as actual time, day and date.
3.3.4 Setting desired interior temperature
When the appliance is switched on (see paragraph 3.3.2) and the status display is
visible, you can set the desired interior temperature.
**
The status display shows the motor home and the current heating program. See Fig. 2.
Press to increase or to decrease the temperature.
NOTE
Desired temperature is displayed, not actual interior temperature.
Selected interior temperature can be changed, no matter if heater is ON or OFF. As soon
as heater is switched on (manually, by remote control or timer) in a cabin heating mode,
appliance will heat interior and keep it at this temperature.
* Exception: in case the last used heating mode was initiated by remote control
(Telestart or Thermo Call), the last non-remote control heating mode is shown.
** If actual heating mode is initiated by remote control, desired interior
temperature cannot be adjusted. Dual Top will heat up interior and keep the
temperature at preset value, selected when setting Thermo Call or Telestart.
Loading...