ASSEMBLY AND INSTALLATION INSTRUCTIONS
Aluminum Conduit Carrier - Model 237
IMPORTANT
BEFORE YOU BEGIN
Read these instructions and
warnings completely before
installation.
BOLT KIT
Bolt Kit #32-0237 is provided with
your Conduit Carrier. Check this
bolt kit to be sure the following
parts are included:
Quan. Description
4 #12-24 Nylon Lock Nuts
(black dichromate)
10 1/4-20 x 3/4" Hex Hd. Bolt
3 1/4-20 x 5/8" Hex Hd. Bolt
13 1/4-20 Nylon Lock Nuts
20 1/4" Flat Washers
WARNING
This product is only intended for, and only safe for, storing and
transporting tubing, pipe and conduit. Any modifications made
to this product, or use of this product for any other purpose than
its intended use, could create a hazardous condition that can
cause serious personal injury or property damage.
PARTS LIST
• 1- Front Body
• 1- Rear Body Assembly
• 1- Door Assembly
• 1- Door Stop
• Weatherstripping (bulk)
• 2- "U" Clamps
• 4- Clamp Brackets
· 7/16" Open or Box End Wrench (2)
· 3/8" Open or Box End Wrench
· Razor knife or scissors
TOOLS REQUIRED
1
Part No. 24-2370 REV. G ECN 5315 05/13
Door Assembly
p/n 25-0037C
Weatherstrip
Weatherstrip
1/4-20 Nylon
Lock Nut
"U" Clamp
p/n 21-0085
1/4-20 x 5/8"
Hex Hd. Bolt
Door Stop
p/n 20-2376C
Rear Body Assembly
p/n 25-0035C
Weatherstrip
Clamp Bracket
p/n 20-2390
#12-24 Nylon Lock Nut
(black dichromate)
Front Body
Weatherstrip
1/4-20 Nylon
Lock Nut
p/n 23-0241C
1/4" Flat Washer
Figure 1. Assembly - Exploded view
1/4-20 x 3/4"
Hex Hd. Bolt
ASSEMBLY INSTRUCTIONS
1. Cut and adhere Weatherstripping
over the Door Stop mounting holes on
the Rear Body Assembly (
2.
).
see Figure
Weatherstrip
(cut from bulk)
Rear Body
Assembly
2. Place the Door Stop on top of the Rear Body Assembly and
the Door inside. Poke the fasteners through the Weatherstrip,
and loosely fasten the Door Stop and Door. Center the Door
on the Rear Body Assembly, then tighten the bolts (
Figure 3.
Door
Assembly
).
Door Stop
Rear Body
Assembly
1/4-20 x 5/8"
Hex Head Bolt
(3 places)
see
1/4-20 Nylon
Lock Nut
(3 places)
Figure 2. Weatherstripping Rear Body Assembly Figure 3. Door Stop and Door to Body Assembly
2