Wayne SYLT40, 331100-001 User Manual

REMINDER: Keep your dated proof of purchase for warranty purposes! Attach it to this manual or file it for safekeeping.

Drain Water

Removal System

Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect
yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property dam­age! Retain instructions for future reference.

Installation Instructions SYLT40

331100-001 1/04

© 2004 Wayne Water Systems

System Applications

This system pumps waste water up to an existing water drain
and is designed for residential use in:

Laundry trays Washing machines
Wet bar sinks Sinks and tubs
Dehumidifiers Air conditioners

System Benefits

Completely assembled Economical
Lightweight Corrosion resistant
Easily installed Installs above floor
Fully sealed Fully automatic
Compact Suds proof

Installation and Hook Up

1. Connect pipe leading from system to discharge pipe
(Depending on the installation, a coupling or reducer may
be necessary).

2. Apply soapy water to seal in system lid and insert vent
through seal.

3. Verify pipe is inserted 2 inches into lid opening.

Figure 1 - Pump and Housing

Specifications

Sump Pump
Information Basin Size Inlet Discharge Vent Weight Check Valve

4/10 HP 10 Gallon w/ sealed lid 1-1/2” 1-1/2” 1-1/2” 28 lbs. Included
UL Listed 17” x 11” x 14”
Fully Automatic

4. Test operational cycle. (To prolong the life expectancy of
this system, flush with tap water every three months.

This pump is not designed for use in

septic tanks or underground vaults to
handle raw sewage or effluents. Never use this unit in haz­ardous or explosive locations.

Figure 2 - Installation with Sink or Laundry Tub

Figure 3 - Installation with Air Conditioner or
Dehumidifier

!

WARNING