Way Huge Blue Hippo MKIII User Manual

WM61

BLUE

™

HIPPO

ANALOG CHORUS MKIII

GET DOWN, AND GET WET....

The Blue Hippo Analog Chorus sounds as lusciously liquefied as ever in a Way Huge Smalls housing. With
its simple Speed and Depth control interface, you can dial in everything from lush tone-widening to full­on rotating speaker modulation madness. If you want to splash on some thick vibrato goodness, just flip
the Vibe switch to give your already aqueous tones a little more texture. The Blue Hippo Analog Chorus is
straightforward and no-nonsense— just plug in and dive into the deep end.

jimdunlop.com/wayhuge

External Controls

2

1

3

4

1 SPEED knob sets rate of aqueous modulation

2 VIBE switch toggles vibrato goodness on/off

3 DEPTH knob regulates level of wetness

4 FOOTSWITCH toggles the effect on/bypass

(blue LED indicates effect is on)

POWER

The Blue Hippo™ Analog Chorus can be powered by a single
9V battery, a Dunlop ECB003/ECB003EU adapter, or the DC
Brick™ and Iso-Brick™ power supplies. The power input is
a 5.5mm x 2.1mm jack with the positive voltage on the outer
sleeve. Using an external power supply will disconnect the
battery. Disconnect the input jack to preserve battery life when
not in use. The pedal will lock into bypass mode when it is
time to change the battery. It also includes power protection
circuitry to prevent damage from AC power supplies.

WAY HUGE • BLUE HIPPO ANALOG CHORUS 2