Way Huge Aqua-Puss MK II Instruction Manual
The Aqua Puss can be powered by a single 9V battery or with
a Dunlop ECB003 external DC power supply. The power input
is a 5.5mm x 2.1mm jack with the positive voltage on the outer
sleeve. Using an external power supply will disconnect the
battery. Disconnect the input jack to preserve battery life when
not in use. The pedal will lock into bypass mode when it is
time to change the battery. It also includes power protection
circuitry to prevent damage from AC power supplies.
POWER
© 2013 DUNLOP MFG. INC.
INPUT IMPEDANCE ....................................... > 300kΩ
SPECIFICATIONS
OUTPUT IMPEDANCE ....................................... < 1kΩ
NOMINAL INPUT ............................................. -20dBV
SIGNAL TO NOISE RATIO* ........................... > 96dB
NOISE REDUCTION RATIO .................................... 2:1
DELAY DISTORTION** ....................................... <= 1%
DELAY RANGE .................................... 20ms to 300ms
DIMENSIONS ..................... 4-25/32" x 3-3/4" x 1-3/4"
WEIGHT............................................................... 14oz.
BYPASS....................................... True Hardwire Relay
CURRENT DRAW................................................ 16mA
POWER SUPPLY ............ 9-VOLT BATTERY, DUNLOP
*A-weighted, V
**500Hz, -20dBV input
Features: heavy-duty footswitch with quiet relay-based true
bypass, blue LED indicator, 5.5mm x 2.1mm power jack with
AC protection, easy access non-detachable battery door,
super-duty 0.09” aluminum anodized chassis, high grade
DUNLOP MANUFACTURING, INC. P.O. BOX 846 BENICIA, CA 94510 U.S.A.
TEL: 1-707-745-2722 FAX: 1-707-745-2658 WWW.JIMDUNLOP.COM
ECB03, DC BRICK, OR CAE MC-403.
= 1V
ref
rms
components, great tone and cool name.
WHE701
Aqua Puss instruction
manual
92503009259revB
The legendary Way Huge Aqua-Puss has returned!
The Aqua-Puss MkII is now making its triumphant return, ready to bathe a
tone-thirsty world in gorgeously smooth delay. It first appeared on Earth in
1996, an analog delay pedal so warm and vibey that guitarists found they
just couldn’t live without it.
The Aqua-Puss delivers all the spooky mystery of vintage analog delay and
tape-based echo, with none of the hassle of creaky, ancient gear. One twist
of the Delay knob takes you from a tight 20ms delay to a cavernous 300ms.
The Feedback control regulates delay duration and intensity. But watch out.
Extreme settings can send the Aqua-Puss MkII into self-oscillating
psycho-freak-out mode! Meanwhile the Blend knob lets you set a
balance between dry and delayed signal—from mild to wild.
The Aqua-Puss integrates easily into any guitar rig. Ideal placement in the
signal chain would be between your guitar and amp, and before any distortion
unit(s). Run a cable from your guitar to the In jack of the Aqua-Puss and run
another cable from the Out jack to your distortion unit or amp and you are set.
DELAY - adjusts warm organic
delay times between 20ms and
300ms
DELAY BLEND
feedback -
sets the number of echo
repea ts
OUT
+9VDC
FEEDBACK
BL END –
regulates ratio of dry
to delayed signal
IN
™
Sample Settings
slap-a-billy classic plex psycho-freak-out
OUT
DELAY BLEND
delay - 10:30
feedback - 7:30
blend - 10 o’clock
+9VDC
FEEDBACK
ANALOG DELAY
IN
™
OUT
DELAY BLEND
delay - 5 o’clock
feedback - 11:30
blend - 8:30
+9VDC
FEEDBACK
ANALOG DELAY
IN
™
OUT
+9VDC
FEEDBACK
DELAY BLEND
ANALOG DELAY
delay - rotate back and
forth from 7 to 5 o’clock
feedback - 5 o’clock
blend - 5 o’clock
ANALOG DELAY
IN
™
FOOTSWITCH – toggles the effect
true bypass
on
/
(blue LED indicates effect is ON)
Loading...