Page 1
DIVIDER BLOX
Included
12 Alignment Pins
4 connectors pins
1 Backer Board
thin and has no adhesive
1 Middle zBoard
adhesive strips on 2 edges
2 Vertical zBoards
adhesive strips on 2 edges
2 Horizontal zBoards
with grooves
• Assemble your unit on a flat even surface, carpet not recommended
• Furniture is for indoor use only
B
1 2 3
Carefully remove the 3M
protective layer from adhesive.
D
Place alignment pins in middle
zBoard and vertical zBoards.
• When moving your Way Basics furniture, lift from the bottom
• Make sure zBoard surfaces are clean and dry
Align vertical zBoards to middle zBoard.
WARNING: CHOCKING HAZARD
Small parts NOT for children under 3 years
Important
THIS SIDE UP
DO NOT place unit on its side or back as
it will compromise its structural integrity.
Watch and Assemble www.waybasics.com/help-divider-blox Help and Comments www.waybasics.com/contact Share and Win www.waybasics.com/share
Align a horizontal zBoard. Align backer zBoard. Align horizontal board and flip right side up.
4 5 6
Visit links below for more details.
Enjoy building possibilities!
Loading...