W Audio MIC130, MIC131 User Manual
Antenna Distribution System
User Manual
Order codes:
MIC130 - ADS4 UHF Antenna Distributor
MIC131 - RPA2 UHF Remote Paddle Antenna
Safety advice
WARNING
FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL
CAREFULLY BEFORE YOUR INITIAL START-UP!
• Immediately upon receiving this product, carefully unpack the carton and check the contents
to ensure that all the parts are present.
• Before initial start-up, please make sure that there is no damage caused during transportation.
• Should there be any damage, consult your dealer and do not use the equipment.
• Retain the carton and all packaging materials.
• In the event that the equipment must be returned to the supplier, it is important that
the equipment is returned in the original carton and packaging.
• To maintain the equipment in good working condition and to ensure safe operation,
it is necessary for the user to follow the safety instructions and warning notes written in this manual.
• Please note that damages caused by user modications to this equipment are not subject to warranty.
CAUTION!
KEEP THIS EQUIPMENT
AWAY FROM MOISTURE,
RAIN AND LIQUIDS, AND
OUT OF DAMP/HUMID
ENVIRONMENTS
CAUTION!
TAKE CARE USING
THIS EQUIPMENT!
HIGH VOLTAGE-RISK
OF ELECTRIC SHOCK!!
IMPORTANT:
The manufacturer will not accept liability for any resulting damages caused by the non-observance
of this manual or any unauthorised modication to the equipment.
• Never let the power cable come into contact with other
cables. Handle the power cable and all mains voltage
connections with caution!
• Never remove warning or informative labels from the
equipment.
• Do not open or modify the equipment.
• Do not connect this equipment to a dimmer-pack.
• Do not switch the equipment on and off in short intervals,
as this will reduce the system’s life.
• Only use the equipment indoors.
• Do not expose to ammable sources, liquids or gases.
• Always disconnect the power from the mains when
equipment is not in use or before cleaning! Only handle
the power cable by the plug. Never pull out the plug by
pulling the power cable.
• Make sure that the available voltage is 12V DC
(240V AC~50Hz power supply included).
• Make sure that the power cable is never crimped
or damaged. Check the equipment and the power
cable periodically.
• If the equipment is dropped or damaged, disconnect
the mains power supply immediately. Have a qualied
engineer inspect the equipment before operating again.
• If the equipment has been exposed to drastic temperature
uctuation (e.g. after transportation), do not switch it on
immediately. The arising condensation might damage the
equipment. Leave the equipment switched off until it has
reached room temperature.
• If the product fails to function correctly, discontinue use
immediately. Pack securely (preferably in the original
packing material), and return to your dealer for service.
• Only use fuses of same type and rating.
• Repairs, servicing and power connection must only be
carried out by a qualied technician. THIS UNIT CONTAINS
NO USER SERVICEABLE PARTS.
• WARRANTY: One year from date of purchase.
OPERATING DETERMINATIONS
If this equipment is operated in any other way, than those described in this manual, the product may suffer damage and
the warranty becomes void. Incorrect operation may lead to danger e.g: short-circuit, burns and electric shocks etc.
In case of malfunction this unit should be returned for service or inspection.
Do not endanger your own safety and the safety of others!
Incorrect installation or use can cause serious damage to people and/or property.
www.prolight.co.uk Antenna Distribution System User Manual
2
Product overview & technical specications
Antenna Distribution System
A UHF wideband antenna splitter suitable for use with up to four radio microphone receivers. Dual 1:4
conguration for use with up to four diversity receivers allows the use of two W Audio RPA2 active antenna across
multiple receivers, reducing intermodulation and resultant RF signal dropout. The antenna features a 5/8” female
thread suitable for mounting onto microphone stands allowing optimum positioning for maximum RF reception.
ADS4 UHF Antenna Distributor
• Loop thru function to allow
system expansion
• Dual 1:4 configuration
• DC power distribution
• BNC antenna connections
• 9V DC bias (100mA) output
for use with active antenna
POWER
RPA2 UHF Remote
Paddle Antenna
• On/off switch with
LED power indication
• Supplied with 13A UK PSU
(12V DC, 5A), ten 0.5m BNC cables
and two 5.0m BNC cables
480mm 240mm
UHF ANTENNA DISTRIBUTION SYSTEM
ADS4
450-1000MHz
• Integral 15dB booster
Specications ADS4
Power supply
Dimensions 50 x 480 x 240mm
Weight 2.3kg
Order code MIC130
50mm
(adaptor supplied)
310mm30mm
• 4~6dBi directional gain
• Wide band 400-1000Mhz
operating frequency range
• 5/8” female thread
400-1000MHz RPA2
for stand mounting
• LED power indicator
Specications RPA2
Power supply 8-12V DC bias via BNC
Dimensions 330 x 310 x 30mm
Weight 0.5kg
Order code MIC131
330mm
DC 8-12V, 5A
www.prolight.co.uk Antenna Distribution System User Manual
3
Loading...