W Audio DQM Series, DQM 800H, DQM 600H, DQM 800BP, DQM 600BP User Manual
Order codes:
MIC82 - DQM 800H 823-830Mhz and 863-865Mhz
MIC82A - DQM 800BP 823-830Mhz and 863-865Mhz
MIC81 - DQM 600H 606-614Mhz
MIC81A - DQM 600BP 606-614Mhz
DQM Series
UHF Radio Microphone System
User Manual
www.prolight.co.uk DQM Series User Manual
2
Safety adviceSafety advice
WARNING
FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL
CAREFULLY BEFORE YOUR INITIAL START-UP!
• Before your initial start-up, please make sure that there is no damage caused during transportation.
• Should there be any damage, consult your dealer and do not use the equipment.
• To maintain the equipment in good working condition and to ensure safe operation, it is necessary
for the user to follow the safety instructions and warning notes written in this manual.
• Please note that damages caused by user modications to this equipment are not subject to warranty.
IMPORTANT:
The manufacturer will not accept liability for any resulting damages caused by the non-observance
of this manual or any unauthorised modication to the equipment.
OPERATING DETERMINATIONS
If this equipment is operated in any other way, than those described in this manual, the product may suffer damage and
the warranty becomes void. Incorrect operation may lead to danger e.g: short-circuit, burns and electric shocks etc.
In case of malfunction this unit should be returned for service or inspection.
Do not endanger your own safety and the safety of others!
Incorrect installation or use can cause serious damage to people and/or property.
• Never let the power cable come into contact with other
cables. Handle the power cable and all mains voltage
connections with particular caution!
• Never remove warning or informative labels from the unit.
• Do not open the equipment and do not modify the unit.
• Do not connect this equipment to a dimmer pack.
• Do not switch the equipment on and off in short intervals,
as this will reduce the system’s life.
• Only use the equipment indoors.
• Do not expose to ammable sources, liquids or gases.
• Always disconnect the power from the mains when
equipment is not in use or before cleaning! Only handle
the power-cable by the plug. Never pull out the plug by
pulling the power-cable.
• Make sure that the available voltage 14V DC, 1200mA.
(240V AC~50Hz power supply included)
• Make sure that the power cable is never crimped or
damaged. Check the equipment and the power cable
periodically.
• If the equipment is dropped or damaged, disconnect the
mains power supply immediately and have a qualied
engineer inspect the equipment before operating again.
• If the equipment has been exposed to drastic
temperature uctuation (e.g. after transportation),
do not connect power or switch it on immediately.
The arising condensation might damage the equipment.
Leave the equipment switched off until it has reached
room temperature.
• If your product fails to function correctly, stop use
immediately. Pack the unit securely (preferably in the
original packing material), and return it to your Pro Light
dealer for service.
• Only use fuses of same type and rating.
• Repairs, servicing and power connection must only be
carried out by a qualied technician. THIS UNIT CONTAINS
NO USER SERVICEABLE PARTS.
• This xture is for professional use only - it is not designed
for or suitable for household use. The product must be
installed by a qualied technician in accordance with local
territory regulations. The safety of the installation is the
responsibility of the installer. The xture presents risks of
severe injury or death due to re hazards, electric shock
and falls.
• WARRANTY: One year from date of purchase.
CAUTION!
KEEP THIS EQUIPMENT
AWAY FROM MOISTURE,
RAIN AND LIQUIDS, AND
OUT OF DAMP/HUMID
ENVIRONMENTS
CAUTION!
TAKE CARE USING
THIS EQUIPMENT!
HIGH VOLTAGE-RISK
OF ELECTRIC SHOCK!!
www.prolight.co.uk DQM Series User Manual
3
Product overview & technical specications
DQM series wireless microphones are quad UHF handheld systems designed for the professional user. Available in two
versions, the systems offer either 8MHz across 110 selectable frequencies for the 606-614Mhz Channel 38 band (DQM 600)
or 9MHz+2Mhz across 99 selectable frequencies for the 823-832Mhz Channel 65 and 863-865Mhz Channel 70 band (DQM
800); both systems utilise a diversity, full width receiver for the ultimate in RF stability.
Outstanding vocal reproduction and stable wireless connectivity allow freedom of movement on stage. These systems offer
crystal clear sound reproduction and rock solid reliability. Handheld transmitters feature ergonomic design with a rugged
housing to stand up to the rigours of the road. The exibility of the handheld systems may be increased by purchasing the
additional DQM 600BP or DQM 800BP.
DQM Series UHF Radio Microphone System
Specications DQM 800H DQM 600H
Operating frequency
823Mhz-830Mhz and
863Mhz-865Mhz
606.0Mhz-614.0Mhz
Power supply 14V 1.2A (adaptor supplied)
Order code MIC82 MIC 81
• UHF band, Phase Lock Loop (PLL)
offering stable RF transmission
• Frequency groups and a group of
users set their own frequencies and
storage, multiple sets of compatible
frequency presets
• Tuning bandwidth up to 8MHz can
provide 110 selectable frequencies
for the 606-614Mhz CH38 band
and 9MHz+2Mhz with 99 selectable
frequencies for the 823-832Mhz
CH65 and 863-865Mhz CH70 band
• OLED display offers a wide viewing
angle while remaining bright in
darkened conditions
• Frequency, Channel, RF and
AF signal strength meters
• 1U rack metal housing with integrated
brackets, include antenna cable
interface for front-mount antenna
• Combined use Jog Dial button
operation for fast menu navigation
• Integrated antenna splitter for
reduced RF interference
• Balanced XLR output for
each channel plus unbalanced
mixed output
• Automatic frequency SCAN function
• IR infrared frequency synchronisation
via infrared interface
• Noise locking
• Mute circuitry for reduced noise
• Flat frequency response: 50Hz-16KHz
• Dynamic, cardioid handheld
microphone capsule
• Battery type: AA 1.5V DC Alkaline
(not supplied)
• 1U full width rack mount receiver
In the handheld system box:
1 x receiver, 2 x removable antenna, 2 x antenna
extension cables, 4 x handheld transmitters, 1 x
14V 1.2A mains PSU & 1 x user manual
In the beltpack box:
1 x beltpack transmitter, 1 x lavalier (tie clip)
microphone, 1 x headset microphone
& 1 x user manual
Receiver specications
• Radio frequency sensitivity:
6dBμV, S/N>80dB
• Working range: Straight line
distance 60 m
(Note: The actual range depends
on RF signal absorption, reection
and interference)
• Mute control mode: Noise locking
• Combined frequency response:
50Hz-16KHz (±3dB)
• Total harmonic distortion (THD):
<0.5% @ 1KHz
• Panel display: OLED display x 4
• Receiver dimensions (H x W x D):
45 x 482 x 215mm
• Weight: 2.0kg
Loading...