For Light Commercial and Residential Applications
ES-05
Job Name
Job Location
Engineer
Approval
–––––––––––––––––––––––––––––––––––––––––––
–––––––––––––––––––––––––––––––––––––––––
–––––––––––––––––––––––––––––––––––––––––––––
–––––––––––––––––––––––––––––––––––––––––––––
Series 05
Mini Water Hammer Arrestors
Sizes: 1⁄4" – 3⁄4" (8 – 20mm)
What is Water Hammer?
The noise from banging pipes is caused by shocks of high
speed water flowing in the piping system when a fixture is
suddenly closed. Sudden stoppage of the water (a noncompressible liquid) flowing at a given pressure and velocity causes a surge or spike of water and is called water
hammer. When this occurs, a pressure wave travels back
through the piping until it finds a point of relief.
Dishwashers, clothes washers, fast closing positive shutoff
valves incorporated in the plumbing system all contribute
to creating water hammer which is not only annoying but
damaging to pipes and appliances. Series 05 water hammer
arrestors provide economical and effective single fixture protection from the destructive and annoying problem of water
pressure shock. Utilizing piston style construction, factory
charged and sealed, the Series 05 provides automatic,
repetitive control of water hammer when properly installed.
Contractor
Approval
Contractor’s P.O. No.
Representative
––––––––––––––––––––––––––––––––––––––––––––
–––––––––––––––––––––––––––––––––––––––––––––
––––––––––––––––––––––––––––––––––––––––
––––––––––––––––––––––––––––––––––
Model 05-CModel 05-QC
Model 05H-M1
Features
• May be installed in concealed locations without access
panels. They are factory air charged and are not rechargeable.
• May be installed in new or existing plumbing systems vertically, horizontally or at any angle.
Pressure – Temperature
Operating Pressure
Designed especially for use in light commercial or residential
applications on lines up to 150psi (10.6 bar) working pressure.
Temperature Range
33°F to 180°F (0.5°C - 82°C)
Air Preload
60psi (4.2 bar)
Model 05-C-T
Model 05-CXT
Model 05-PEX-T
Models
05 For NPT threaded applications.
05-QC Arrestor offered with Quick-Connect Tee.
05-C For installation on
applications.
05H-M1 For in-line use with washing machines.
05-C-T For either
installation.
05-CXT For installation directly on supply stop either
between stub out and stop or between stop and
supply tube.
05-PEX-T For either
See reverse side for complete list of models.
IMPORTANT: INQUIRE WITH GOVERNING AUTHORITIES
FOR LOCAL INSTALLATION REQUIREMENTS
1
⁄4" icemaker or 3⁄8" lav supply tube
3
⁄8" or 1⁄2" in-line PEX installation.
1
⁄2" CTS for new or retrofit
Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements,
please contact Watts Technical Service. Watts reserves the right to change or modify product design, construction, specifications, or materials without prior notice and without incurring any obligation to make such changes and modifications on Watts products previously or subsequently sold.
Standards
1010
Meets requirements of ASSE Standard 1010 and listed
by IAPMO.
Fig. 1
Fig. 2
Installations
Watts Series 05 water hammer arrestors should always be
installed as close to the source of shock as possible - one
unit on each hot and cold water line.
Although they function in any orientation, Figure 1, 2 and
shock source
3 show the proper installation where the shock would be
absorbed most effectively.
shock source
Dimensions - Weight
Straight Models
MODEL SIZE (DN) CONNECTION TYPE DIMENSION WEIGHT
A B
in mm in mm in mm lbs kgs
05
05
05-CPVC
05-H
05H-M1
05-S
05-S
05-C
3
⁄8 10 NPT 11⁄4 32 51⁄4 133 0.34 0.15
1
⁄2 15 NPT 11⁄4 32 51⁄2 140 0.36 0.16
1
⁄2 15 CPVC 11⁄8 29 411⁄16 118 0.10 0.05
3
⁄4 20 Hose 2 50 63⁄8 162 0.48 0.20
3
⁄4 20 Hose 33⁄16 81 611⁄16 170 0.60 0.27
1
⁄2 15 Sweat 1 25 51⁄2 140 0.30 0.14
3
⁄4 20 Sweat 1 25 47⁄8 124 0.08 0.04
5
⁄8 16 OD Comp. 11⁄4 32 55⁄8 143 0.40 0.18
shock source
Fig. 3
B
A
Tee Models
MODEL SIZE (DN) CONNECTION TYPE DIMENSION WEIGHT
A B
in mm in mm in mm lbs kgs
05-C-T
05-C-T
05-CXT
05-CXT
05-PEX-T
05-PEX-T
Quick-Connect
MODEL SIZE (DN) CONNECTION TYPE DIMENSION WEIGHT
A B
in mm in mm in mm lbs kgs
05-QC
05-QC
A Watts Water Technologies Company
ES-05 1012 © 2010 Watts
1
⁄4 8 OD Comp. 23⁄4 70 413⁄16 122 0.17 0.07
3
⁄8 10 OD Comp. 3 77 413⁄16 122 0.17 0.07
3
⁄8 10 OD Comp. x Reverse Comp. Nut 213⁄16 72 413⁄16 122 0.17 0.07
5
⁄8 16 OD Comp. x Reverse Comp. Nut 31⁄16 78 413⁄16 122 0.18 0.08
3
⁄8 10 PEX 21⁄4 58 411⁄16 119 0.12 0.05
1
⁄2 15 PEX 21⁄4 58 411⁄16 119 0.12 0.05
1
⁄2 15 Quick-Connect 35⁄8 93 73⁄8 187 .4 .18
3
⁄4 20 Quick-Connect 33⁄32 104 93⁄4 247 .57 .26
USA: 815 Chestnut St., No. Andover, MA 01845-6098; www.watts.com
Canada: 5435 North Service Rd., Burlington, ONT. L7L 5H7; www.wattscanada.ca
A
B
A
B