Watts PWRO4ZRO User Manual

For Residential Applications

ES-WQ-PWRO4ZRO

Job Name

Job Location

Engineer

Approval

–––––––––––––––––––––––––––––––––––––––––––

–––––––––––––––––––––––––––––––––––––––––

–––––––––––––––––––––––––––––––––––––––––––––

LEAD FREE

Contractor

Approval

Contractor’s P.O. No.

Representative

Model PWRO4ZRO

Zero Waste Reverse Osmosis System ZRO-4 Zero Waste RO System

The all new patented Zero Waste Point-of-Use Reverse Osmosis System is the first ever that wastes no water. Comparable systems typically waste up to 4 -12 gallons for every gallon of RO water produced. This Watts highly efficient RO system provides better-than-bottled water quality for residential applications.

Features

• 4-Stage Filtration System Stage 1: Sediment Filter removes particulates down

Stage 2: Carbon Block Filter removes chlorine taste

Stage 3: Advanced TFC Membrane rejects impurities

Stage 4: Activated Carbon Final Filter serves as a final

• Re-use of rinsewater (no waste)

• 50 gallons per day TFC membrane

• Upgraded Watts top mount faucet

• 3-Gallon Storage Tank

Versatility

• No faucet air gap or drain connection required.

• Space saving design, installs under sink or in limited space.

• Adapt-A-Valve™ easily connects to water source.

• Ideal for low pressure or well applications.

Reliability

• Advanced design uses patented technology and high-quality

components to ensure years of continuous operations with trouble-free performance.

• As with all of the products in the Watts family, the Zero

Waste RO is backed by Watts reputation of excellence

• Economical and enviromentally friendly

• 100% Efficient - No wasted water

• Saves as much as 7,000 gallons per year in a typical residen-

tial application.

• Delivers high-quality drinking water for pennies a day.

to 1 micron

and odors

down to 1/10,000th of a micron

polish to remove any trace residuals.

––––––––––––––––––––––––––––––––––––––––––––

–––––––––––––––––––––––––––––––––––––––––––––

––––––––––––––––––––––––––––––––––

––––––––––––––––––––––––––––––––––––––––

PURE WATER

PWRO4ZRO

System tested and certied by NSF International against NSF/ANSI Standard 58 for the reduction

of the claims speciﬁed on the performance data sheet.

Note: Do not use with water that is microbiologically unsafe or

of unknown quality without adequate disinfection before or after the system. Systems certified for cyst reduction may be used on disinfected waters that may contain filterable cysts.

System tested and certified by WQA against NSF/ANSI Standard 372 for “lead free” compliance

*The wetted surface of this product contacted by consumable water contains less than 0.25% of lead by weight.

Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements, please contact Watts Technical Service. Watts reserves the right to change or modify product design, construction, specifications, or materials without prior notice and without incurring any obligation to make such changes and modifications on Watts products previously or subsequently sold.

System Specifications

Temperature: Minimum 40°F (4.4C),

Pressure: Minimum 40psi (2.8kg/cm2),

pH: Minimum 2, Maximum 11

Iron (Fe): Max 1.0 ppm

TDS (Total Dissolved Solids): <1800ppm

Turbidity: <5 NTU

Unit Dimensions: Approx. 20" W x 18" H x 6" D

Maximum 100°F (37.8C)

Maximum 85psi (6.0 kkg/cm2)

Replacement Filter Packs

Model Frequency description

PWFPKSEDCB 6 Months Includes sediment and carbon filter only PWFPK4RO4 Includes all filters and membrane PWMEM50 2 - 5 years 50 gallon per day membrane PWILGAC10 Annually 10" final in-line filter Note: Water conditions may require more frequent cartridge replacement

A Watts Water Technologies Company

USA: Tel. (800) 224-1299 • www.watts.com

Canada: Tel. (888) 208-8927 • www.watts.ca