Watts LFWP24B User Manual

For Residential and Commercial Applications
ES-WP-LFBrassTestPlugs
Job Name
Job Location
Engineer
Approval
–––––––––––––––––––––––––––––––––––––––––––
–––––––––––––––––––––––––––––––––––––––––
–––––––––––––––––––––––––––––––––––––––––––––
–––––––––––––––––––––––––––––––––––––––––––––
LEAD FREE
*
Contractor
Approval
Contractor’s P.O. No.
Representative
Lead Free* Brass CrimpRing™ Test Plugs
Lead Free* Brass CrimpRing™ Test Plugs are used for pressure testing the system. The Lead Free* Brass CrimpRing Plugs feature Lead Free* construction.
Specifications
System shall be plumbed using Watts WaterPEX® cross-linked polyethylene pipe, and all joints shall be made using Watts Lead Free* Brass CrimpRing fittings using either the Watts copper CrimpRing steel CinchClamp Installation Guidelines. Lead Free* Brass CrimpRing shall comply with state codes and standards, where applicable, requiring reduced lead content.
crimping methods as outlined in the Watts
and/or Poly-alloy CrimpRing™
Installation Note
Lead Free* Brass CrimpRing™ Test Plugs must be installed in accordance with all Watts installation procedures, including information provided in installation manual and guidelines.
Approvals
• Manufactured in accordance with American Society for Testing and Materials (ASTM International) F877 and F1807
• Listed by the NSF International to NSF Standards 14 and 61
for use in potable water systems
• Listed by NSF International to be in compliant to the Uniform
Plumbing Code
• Labeled B137.5 which indicates that it is compliant to the CSA Standards B137.5
Test
or stainless
fittings
Dimensions – Weights
MODEL CONNECTION PKG WEIGHT
This product is UL 1821 listed for PEX multipurpose systems used to support NFPA 13D when used with Watts (Residential Fire) RF PEXTM Tubing, RF PEXTM Fittings, RF PEXTM Sprinkler Fittings and Copper CrimpRingsTM. You must refer to Watts Residential Fire at watts.com/res­fire for further product specification and safety informa­tion. DO NOT USE OTHER PRODUCTS WITHOUT SUCH DESIGNATION IN FIRE PROTECTION APPLICATIONS.
Note: Watts WaterPEX CinchClamp™ fittings should not be
used with wrought copper PEX fittings.
* The wetted surface of this product contacted by consumable water con-
tains less than one quarter of one percent (0.25%) of lead by weight.
–––––––––––––––––––––––––––––––––––––––––––––
LFWP24B-06PB
LFWP24B-08PB
LFWP24B-12PB
LFWP24B-16PB
––––––––––––––––––––––––––––––––––––––––––––
––––––––––––––––––––––––––––––––––
––––––––––––––––––––––––––––––––––––––––
LFWP24
CrimpRing™ Test Plug
in. mm type lbs. kgs.
3
8 10 Crimp Fitting 1 0.4
1
2 15 Crimp Fitting 1 0.4
3
4 20 Crimp Fitting 2 0.9
1 25 Crimp Fitting 2 0.9
Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements, please contact Watts Technical Service. Watts reserves the right to change or modify product design, construction, specifications, or materials without prior notice and without incurring any obligation to make such changes and modifications on Watts products previously or subsequently sold.
USA: No. Andover, MA • Tel: (978) 688-1811 • Fax: (978) 794-1848 • www.watts.com Canada: Burlington, ON • Tel: (905) 332-4090 • Fax: (905) 332-7068 • www.wattscanada.ca
ES-WP-LFBrassTestPlugs 1125 © 2011 Watts
A Watts Water Technologies Company
Loading...