Watts LFFS-CIC-S User Manual
For Commercial and Residential Applications
ES-LFCIC-S
Job Name
Job Location
Engineer
Approval
LEAD FREE
–––––––––––––––––––––––––––––––––––––––––––
–––––––––––––––––––––––––––––––––––––––––
–––––––––––––––––––––––––––––––––––––––––––––
–––––––––––––––––––––––––––––––––––––––––––––
*
Series LFCIC-S
Flexible Braided Stainless Steel
Supply Connectors for Ice Makers
Sizes: 1⁄4" (8mm)
Series LFCIC-S Flexible Stainless Steel Water Supply Connectors
for Ice Makers are used in residential and commercial applications, specifically for hookups to the icemaker water supply on
refrigerators. These connectors provide protection from vibration
and bursting under extreme pressure surges. Their flexibility also
facilitates the moving of a refrigerator without danger or permanent damage from kinked copper tubing. Series LFCIC-S consists of PVC tubing jacketed with polyester knitted nylon, protective Stainless steel outer layer, and permanently attached, brass,
compression end fittings. The LFCIC-S features Lead Free*
construction to comply with Lead Free* installation requirements.
Contractor
Approval
Contractor’s P.O. No.
Representative
LFCIC-S-CC
––––––––––––––––––––––––––––––––––––––––––––
–––––––––––––––––––––––––––––––––––––––––––––
–––––––––––––––––––––––––––––––––––
––––––––––––––––––––––––––––––––––––––––
Models
LFCIC-S - All models are supplied with solid brass compres-
sion end fittings.
Dimensions
Compression
end
Compression
end
Features
• Available in lengths: 6ft, 10ft, or 20ft
(1800, 3100, or 7000mm)
• Tubing
– PVC
– Braided stainless steel jacket
• Brass compression end fittings and barbs
• Convenient for difficult installations
Approvals
• Hoses are NSF 61 approved for safer drinking water
Standards
NSF and UPC Listed
372
Pressure-Temperature
Maximum Working Pressure: 125psi (8.6 bar)
Maximum Temperature: 180°F (82°C)
National residential plumbing codes reference the maximum
Note:
operating temperature as 140°F (60°C). Plumbing xtures are designed to ANSI—ASME A112 18.1 at 125psi.
Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements, please contact Watts Technical Service. Watts
reserves the right to change or modify product design, construction, specifications, or materials without prior notice and without incurring any obligation to make such changes and modifications
on Watts products previously or subsequently sold.
1
⁄4" 6', 10', 20'
3
⁄8" 10'
PRODUCT INDIVIDUAL
NO. SIZE WGT. (LBS.)
LFCIC-S
LFCIC-S
LFCIC-S
LFCIC-S
1
⁄4" x 1⁄4" x 12" .17
1
⁄4" x 1⁄4" x 6' .80
1
⁄4" x 1⁄4" x 10' 1.40
1
⁄4" x 1⁄4" x 20' 2.50
1
3
Materials
Tubing:
Body: PVC
Jacket: Stainless Steel
Fittings: Brass
*The wetted surface of this product contacted by consumable
water contains less than 0.25% of lead by weight.
⁄4"
⁄8"
USA: Tel: (978) 688-1811 • Fax: (978) 794-1848 • www.watts.com
Canada: Tel: (905) 332-4090 • Fax: (905) 332-7068 • www.watts.ca
ES-LFCIC-S 1405 © 2014 Watts
A Watts Water Technologies Company
Loading...