For Residential and Commercial Applications
ES-LFFS-CFC-S
Job Name
Job Location
Engineer
Approval
LEAD FREE
–––––––––––––––––––––––––––––––––––––––––––
–––––––––––––––––––––––––––––––––––––––––
–––––––––––––––––––––––––––––––––––––––––––––
–––––––––––––––––––––––––––––––––––––––––––––
*
Series LFFS-CFC-S
FloodSafe
Braided Stainless Steel
Faucet Connectors
Series LFFS-CFC-S FloodSafe® Braided Stainless Steel Faucet
Connectors are designed for use in residential & commercial
applications, specifically for hookups to the faucet water supply.
They include a patented FloodSafe
side to protect against catastrophic water damage. There are
no mechanical moving parts during normal operation and no
power source is required. FloodSafe
PVC tubing jacketed with braided stainless steel and require
no tube cutting, bending, or soldering during installation. Various end connections are available. The LFFS-CFC-S features
Lead Free* construction to comply with Lead Free* installation
requirements.
®
®
shutoff device on the inlet
®
connectors consist of
Contractor
Approval
Contractor’s P.O. No.
Representative
Compression
C
3⁄8" ---------------------- 12", 16", 20" --------------------- 3⁄8"
Compression
C
1⁄2" ---------------------- 12", 16", 20" --------------------- 1⁄2"
3⁄8" ---------------------- 12", 16", 20" --------------------- 1⁄2"
7⁄16" ---------------------- 12", 16", 20" --------------------- 1⁄2"
Female iron pipe
(FIP) end
––––––––––––––––––––––––––––––––––––––––––––
–––––––––––––––––––––––––––––––––––––––––––––
––––––––––––––––––––––––––––––––––
––––––––––––––––––––––––––––––––––––––––
end
end
Compression
end
C
Female iron pipe
(FIP) end
F
Female iron pipe
(FIP) end
Features
• Available in 12", 16" and 20" (305, 406 and 508mm) lengths
• NSF & IAPMO Listed
• Only economical and secure safeguard against catastrophic
water damage available on the market
• U.S. Patent No. 7,111,638
• No mechanical moving parts during normal operation,
ensuring years of maintenance free operation
• Does not require electricity, batteries or any other source of
power
• Installs between the stop valve and the fixture/appliance with
the FloodSafe
• Acts as a water conservation device, by shutting off the water
to the faucet when the mandated flow restrictor is removed
• FloodSafe
been stopped
®
device located at the stop valve
®
connectors can be easily reset if water flow has
Specifications
A braided stainless steel faucet connector shall be installed as
indicated on the plans. The connector shall have a patented
FloodSafe
be pressure rated to 125psi (8.75 bar) and be NSF & IAPMO
listed. Connector shall be a Watts Series LFFS-CFC-S.
*The wetted surface of this product contacted by consumable
water contains less than 0.25% of lead by weight.
®
shutoff device on the inlet side. The connector shall
F
1⁄2" ---------------------- 12", 16", 20" --------------------- 1⁄2"
Fine thread
female end
T
1⁄2" ---------------------- 12", 16", 20" --------------------- 1⁄2"
3⁄8" ---------------------- 12", 16", 20" --------------------- 1⁄2"
Female iron pipe
(FIP) end
“Delta Style”
Compression
end
C
3⁄8" ------------------------ 12", 20" ------------------------ 3⁄8"
OD compression
end
F
F
O
Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements,
please contact Watts Technical Service. Watts reserves the right to change or modify product design, construction, specifications, or materials without prior notice and without incurring any obligation to make such changes and modifications on Watts products previously or subsequently sold.
Models
LF
FS-CFC-S-CC – Both ends of the flexible connector are
LF
FS-CFC-S-CF – One end of the flexible connector is sup
supplied with plated solid brass nut
compression end fittings for connection to
supply stop valves and faucets.
plied with a plated, solid brass compression end fitting for connection to a supply
Pressure – Temperature
Minimum bend radius: 2.5 inches
Maximum Continuous Pressure: 125 psi/8.6 bar
Maximum intermittent impulse pressure: 180 psi/12.4 bar
Maximum Continuous Temperature: 160°F/71°C
Maximum intermittent exposure: 180°F/82°C
For use with water in accessible locations only
stop valve. The other end is supplied with a
plated, solid brass female iron pipe thread
fitting.
LF
FS-CFC-S-FF – Both ends of the flexible connector are
supplied with a plated, solid brass female
iron pipe thread fittings.
LF
FS-CFC-S-TF – One end of the flexible connector is sup-
plied with a plated, solid brass female iron
pipe thread fitting. The other end with a
plated, solid brass fine thread female iron
pipe fitting.
LFFS-CFC-S-CO – One end of the flexible connector is sup-
plied with a plated solid brass compression end fitting for connection to a supply
stop valve. The other end is supplied with
a plated, solid brass OD compression end
fitting.
MODEL SIZE LENGTH BRAID MATERIAL WEIGHT
in. in. mm lbs kgs
LFFS-CFC-S-CC
LFFS-CFC-S-CC
LFFS-CFC-S-CC
LFFS-CFC-S-CF
LFFS-CFC-S-CF
LFFS-CFC-S-CF
LFFS-CFC-S-CF
LFFS-CFC-S-CF
LFFS-CFC-S-CF
LFFS-CFC-S-CF
*
LFFS-CFC-S-CF
LFFS-CFC-S-CF
LFFS-CFC-S-FF
LEAD FREE
LFFS-CFC-S-FF
LFFS-CFC-S-FF
LFFS-CFC-S-TF
LFFS-CFC-S-TF
LFFS-CFC-S-TF
LFFS-CFC-S-TF
LFFS-CFC-S-TF
LFFS-CFC-S-TF
LFFS-CFC-S-CO
LFFS-CFC-S-CO
3
⁄8 x 3⁄8 12 305 Stainless Steel 0.25 0.11
3
⁄8 x 3⁄8 16 406 Stainless Steel 0.28 0.12
3
⁄8 x 3⁄8 20 508 Stainless Steel 0.32 0.15
1
⁄2 x 1⁄2 12 305 Stainless Steel 0.28 0.12
1
⁄2 x 1⁄2 16 406 Stainless Steel 0.31 0.14
1
⁄2 x 1⁄2 20 508 Stainless Steel 0.35 0.16
3
⁄8 x 1⁄2 12 305 Stainless Steel 0.27 0.12
3
⁄8 x 1⁄2 16 406 Stainless Steel 0.31 0.14
3
⁄8 x 1⁄2 20 508 Stainless Steel 0.34 0.15
7
⁄16 x 1⁄2 12 305 Stainless Steel 0.26 0.12
7
⁄16 x 1⁄2 16 406 Stainless Steel 0.30 0.14
7
⁄16 x 1⁄2 20 508 Stainless Steel 0.34 0.15
1
⁄2 x 1⁄2 12 305 Stainless Steel 0.32 0.14
1
⁄2 x 1⁄2 16 406 Stainless Steel 0.36 0.16
1
⁄2 x 1⁄2 20 508 Stainless Steel 0.39 0.18
1
⁄2 x 1⁄2 12 305 Stainless Steel 0.28 0.13
1
⁄2 x 1⁄2 16 406 Stainless Steel 0.31 0.14
1
⁄2 x 1⁄2 20 508 Stainless Steel 0.35 0.16
3
⁄8 x 1⁄2 12 305 Stainless Steel 0.27 0.12
3
⁄8 x 1⁄2 16 406 Stainless Steel 0.31 0.14
3
⁄8 x 1⁄2 20 508 Stainless Steel 0.34 0.15
3
⁄8 x 3⁄8 12 305 Stainless Steel 0.27 0.12
3
⁄8 x 3⁄8 20 508 Stainless Steel 0.34 0.15
A Watts Water Technologies Company
ES-LFFS-CFC-S 1313 © 2013 Watts
USA: Tel: (978) 688-1811 • Fax: (978) 794-1848 • www.watts.com
Canada: Tel: (905) 332-4090 • Fax: (905) 332-7068 • www.watts.ca