Watts LFCWH-S User Manual
For Commercial and Residential Applications
ES-LFCWH-S
Job Name
Job Location
Engineer
Approval
LEAD FREE
–––––––––––––––––––––––––––––––––––––––––––
–––––––––––––––––––––––––––––––––––––––––
–––––––––––––––––––––––––––––––––––––––––––––
–––––––––––––––––––––––––––––––––––––––––––––
*
Series LFCWH-S
Flexible Braided Stainless Steel
Water Supply Connectors for
Water Heaters
Sizes: 5⁄8" to 7⁄8" (16 to 22mm)
Series LFCWH-S Flexible Braided Stainless Steel Water Supply
Connectors for Water Heaters are used in residential and commercial applications, specifically for water heater hookups.
These connectors provide full flow capacity and protection from
vibration and bursting under pressure surges and seismic activity. Series LFCWH-S connectors consist of PVC tubing jacketed
with braided stainless steel wire, and permanently attached
brass compression end fittings. The LFCWH-S features Lead
Free* construction to comply with Lead Free* installation
requirements. Various end connections are available.
Features
• Available in lengths: 12", 15", 18", 24", 36", 48", and 60"
(300, 375, 450, 600, 900, 1500mm)
• Tubing
– PVC body
– Braided stainless steel jacket
• Brass compression end fittings
• NSF/ANSI 61-G approved hoses for safer drinking water
• No tube cutting or bending
• No soldering
• No extra adapters, fittings, or couplings required
• Lead Free* materials
Standards
ASME A112.18.6
NSF/ANSI 61-G
Approvals
Contractor
Approval
Contractor’s P.O. No.
Representative
––––––––––––––––––––––––––––––––––––––––––––
–––––––––––––––––––––––––––––––––––––––––––––
–––––––––––––––––––––––––––––––––––
––––––––––––––––––––––––––––––––––––––––
LFCWH-S-AA-L
Pressure-Temperature
Maximum Continuous Pressure: 125 psi (8.6 bar)
Maximum Intermittent / Impulse Pressure: 180 psi (12.4 bar)
Maximum Continuous Temperature: 180°F (82°C)
Maximum Intermittent Temperature: 180°F (82°C)
Models
LFCWH-S-FF-L - Supplied with female iron pipe thread fit-
LFCWH-S-AF-L - Supplied with one end connector as
LFCWH-S-AA-L - Supplied with unique compression end
LFCWH-S-FM-L - Supplied with a female iron pipe thread
LFCWH-S-AM-L - Supplied with a male iron pipe thread fitting
tings at each end of the flexible connector.
described above and one unique compression end fitting which features a
captured ferrule to prevent misalignment
between the tube and ferrule during installation of the connector.
fitting as described above at each end of
the flexible connector.
fitting at one end and a male iron pipe
thread fitting at the other end of the flexible connector.
at one end and a unique compression end
fitting which features a captured ferrule to
prevent misalignment between the tube and
ferrule during installation of the connector at
the other end of the flexible connector.
Materials
Tubing:
Body: PVC
Jacket: Braided Stainless steel
Fittings: Brass
* The wetted surface of this product contacted by consumable water
contains less than 0.25% of lead by weight.
Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements,
please contact Watts Technical Service. Watts reserves the right to change or modify product design, construction, specifications, or materials without prior notice and without incurring any obligation to make such changes and modifications on Watts products previously or subsequently sold.
Dimensions
Female iron pipe
(FIP) end
F
3
⁄4" 12", 15", 18", 24", 36", 48", 60", 72"
Compression
end
A
7
⁄8" 12", 15", 18", 24", 36", 48", 60", 72"
5
⁄8" 12", 15", 18", 24"
3
Compression
end
A
7
⁄8" 12", 15", 18", 24"
7
Female iron pipe
(FIP) end
F
3
⁄4" 12", 15", 18", 24"
3
Compression
end
Female iron pipe
(FIP) end
3
Female iron pipe
(FIP) end
3
Compression
end
Male iron
pipe end
Male iron
pipe end
PRODUCT
NO.
LFCWH-S-FF-L
F
⁄4"
LFCWH-S-FF-L
LFCWH-S-FF-L
LFCWH-S-FF-L
LFCWH-S-FF-L
LFCWH-S-FF-L
LFCWH-S-FF-L
LFCWH-S-AF-L
F
⁄4"
⁄4"
LFCWH-S-AF-L
LFCWH-S-AF-L
LFCWH-S-AF-L
LFCWH-S-AF-L
LFCWH-S-AF-L
LFCWH-S-AF-L
LFCWH-S-AF-L
A
⁄8"
LFCWH-S-AF-L
LFCWH-S-AA-L
LFCWH-S-AA-L
LFCWH-S-AA-L
LFCWH-S-AA-L
LFCWH-S-FM-L
LFCWH-S-FM-L
M
⁄4"
LFCWH-S-FM-L
LFCWH-S-FM-L
LFCWH-S-AM-L
LFCWH-S-AM-L
LFCWH-S-AM-L
LFCWH-S-AM-L
SIZE INDIVIDUAL
WGT. (LBS.)
3
⁄4" x 3⁄4" x 12" 0.50
3
⁄4" x 3⁄4" x 15" 0.70
3
⁄4" x 3⁄4" x 18" 0.90
3
⁄4" x 3⁄4" x 24" 1.30
3
⁄4" x 3⁄4" x 36" 2.10
3
⁄4" x 3⁄4" x 48" 2.90
3
⁄4" x 3⁄4" x 60" 3.70
5
⁄8" x 3⁄4" x 12" 0.50
5
⁄8" x 3⁄4" x 15" 0.70
5
⁄8" x 3⁄4" x 18" 0.90
5
⁄8" x 3⁄4" x 24" 1.20
7
⁄8" x 3⁄4" x 12" 0.60
7
⁄8" x 3⁄4" x 15" 0.80
7
⁄8" x 3⁄4" x 18" 1.00
7
⁄8" x 3⁄4" x 24" 1.40
7
⁄8" x 3⁄4" x 48" 3.00
7
⁄8" x 7⁄8" x 12" 0.80
7
⁄8" x 7⁄8" x 15" 1.00
7
⁄8" x 7⁄8" x 18" 1.20
7
⁄8" x 7⁄8" x 24" 1.60
3
⁄4" x 3⁄4" x 12" 0.50
3
⁄4" x 3⁄4" x 15" 0.70
3
⁄4" x 3⁄4" x 18" 0.90
3
⁄4" x 3⁄4" x 24" 1.30
7
⁄8" x 3⁄4" x 12" 0.60
7
⁄8" x 3⁄4" x 15" 0.80
7
⁄8" x 3⁄4" x 18" 1.00
7
⁄8" x 3⁄4" x 24" 1.30
A
7
⁄8" 12", 15", 18", 24"
5
⁄8" 12", 15", 18", 24"
3
3
M
⁄4"
* The wetted surface of this product contacted by consumable
water contains less than 0.25% of lead by weight.
⁄4"
A Watts Water Technologies Company
USA: Tel: (978) 688-1811 • Fax: (978) 794-1848 • www.watts.com
Canada: Tel: (905) 332-4090 • Fax: (905) 332-7068 • www.watts.ca
ES-LFCWH-S 1340 © 2013 Watts
Loading...