Watts LFCIC-P User Manual

For Commercial and Residential Applications
ES-LFCIC-P
Job Name
Job Location
Engineer
Approval
LEAD FREE
–––––––––––––––––––––––––––––––––––––––––––
–––––––––––––––––––––––––––––––––––––––––
–––––––––––––––––––––––––––––––––––––––––––––
–––––––––––––––––––––––––––––––––––––––––––––
*
Series LFCIC-P
Flexible Reinforced PVC Water Supply Connectors for Ice Makers
Sizes: 1⁄4" (8mm)
Series LFCIC-P Flexible Reinforced PVC Water Supply Connec­tors for Ice Makers are used in residential and commercial ap­plications, specically for hookups to the icemaker water supply on refrigerators. These connectors provide protection from vibra­tion and bursting under extreme pressure surges. Their exibility also facilitates the moving of a refrigerator without danger or permanent damage from kinked copper tubing. Series LFCIC-P consists of PVC tubing jacketed with polyester knitted nylon, protective PVC outer layer, and permanently attached, brass, compression end ttings. The LFCIC-P features Lead Free* construction to comply with Lead Free* installation requirements.
Contractor
Contractor’s P.O. No.
Representative
LFCIC-P-CC
––––––––––––––––––––––––––––––––––––––––––––
–––––––––––––––––––––––––––––––––––––––––––––
–––––––––––––––––––––––––––––––––––
––––––––––––––––––––––––––––––––––––––––
Models
LFCIC-P - All models are supplied with solid brass compres-
sion end fittings.
Dimensions
Compression end
Compression
end
Features
• Available in lengths: 6ft, 10ft, or 20ft (1800, 3100, or 7000mm)
• Tubing
– PVC – Polyester knitted nylon jacket – Protective PVC outer layer
• Brass compression end fittings and barbs
• Convenient for difficult installations
1
4" 6', 10', 20'
3
8" 10'
PRODUCT INDIVIDUAL NO. SIZE WGT. (LBS.)
LFCIC-P LFCIC-P LFCIC-P
1
4" x 1⁄4" x 6' 0.80
1
4" x 1⁄4" x 10' 1.40
1
4" x 1⁄4" x 20' 2.50
1
3
Approvals
• Hoses are NSF 61 approved for safer drinking water
Standards
NSF and UPC Listed
Pressure-Temperature
Maximum Working Pressure: 125psi (8.6 bar)
Maximum Temperature: 140°F (60°C)
National residential plumbing codes reference the maximum
Note:
operating temperature as 140°F (60°C). Plumbing xtures are de­signed to ANSI—ASME A112 18.1 at 125psi.
Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements, please contact Watts Technical Service. Watts reserves the right to change or modify product design, construction, specifications, or materials without prior notice and without incurring any obligation to make such changes and modifications on Watts products previously or subsequently sold.
Materials
Tubing: Body: PVC Jacket: PVC Fittings: Brass
*The wetted surface of this product contacted by consumable water contains less than 0.25% of lead by weight.
4"
8"
USA: Tel: (978) 688-1811 • Fax: (978) 794-1848 • www.watts.com Canada: Tel: (905) 332-4090 • Fax: (905) 332-7068 • www.watts.ca
ES-LFCIC-P 1313 © 2013 Watts
A Watts Water Technologies Company
Loading...