For Commercial and Residential Applications
ES-LFCDC-S
Job Name
Job Location
Engineer
Approval
LEAD FREE
–––––––––––––––––––––––––––––––––––––––––––
–––––––––––––––––––––––––––––––––––––––––
–––––––––––––––––––––––––––––––––––––––––––––
–––––––––––––––––––––––––––––––––––––––––––––
*
Series LFCDC-S
Braided Stainless Steel
Water Supply Connectors for
Dishwashers
Sizes: 3⁄8" to 3⁄4" (10 to 19mm)
Series LFCDC-S Braided Stainless Steel Water Supply
Connectors for Dishwashers are used in residential and commercial applications, specifically for hookups to the dishwasher
water supply. These Lead Free* connectors provide full flow
capacity, protection from vibration and bursting under extreme
pressure surges, and superior resistance to chlorinated water.
Series LFCDC-S connectors consist of PVC tubing jacketed with braided stainless steel and come with elbow fittings.
Various end connections are available. The LFCDC-S features
Lead Free* construction to comply with Lead Free* installation
requirements.
Contractor
Approval
Contractor’s P.O. No.
Representative
––––––––––––––––––––––––––––––––––––––––––––
–––––––––––––––––––––––––––––––––––––––––––––
–––––––––––––––––––––––––––––––––––
––––––––––––––––––––––––––––––––––––––––
LFCDC-S-CE
Models
LFCDC-S-CE - Supplied with a plated, solid brass nut com-
LFCDC-S-FE - Supplied with a plated, solid brass nut
pression end fittings at both ends of the flexible connector and a brass male iron pipe
thread elbow fitting.
female iron pipe thread connector at one
end of the flexible connector and a brass
male iron pipe thread elbow fitting attached
to compression end fitting at the other end
of the flexible connector.
Features
• Available in lengths: 48”, 60”, and 72”
(900, 1500, or 1800mm)
• Tubing
– PVC body
– Braided stainless steel jacket
• Brass compression end fittings (Model LFCDC-S-CE only)
• Brass female iron pipe threaded connectors
(Model LFCDC-S- FE only
• Brass male iron pipe thread elbow fittings
Standards
NSF Listed
UPC Listed
372
Pressure-Temperature
Maximum Working Pressure: 125psi (8.6 bar)
Maximum Temperature: 180°F (82°C)
Materials
Tubing:
Body: PVC
Jacket: Stainless steel
Fittings: Brass
*The wetted surface of this product contacted by consumable
water contains less than 0.25% of lead by weight.
Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements,
please contact Watts Technical Service. Watts reserves the right to change or modify product design, construction, specifications, or materials without prior notice and without incurring any obligation to make such changes and modifications on Watts products previously or subsequently sold.
Dimensions
Compression end
Male iron pipe
elbow end
C
3
⁄8" 48", 60", 72"
Female iron pipe
(FIP) end
F
1
⁄2" 48", 60", 72"
PRODUCT INDIVIDUAL
NO. SIZE WGT. (LBS.)
LFCDC-S-CE
LFCDC-S-CE
LFCDC-S-CE
LFCDC-S-FE
LFCDC-S-FE
LFCDC-S-FE
3
⁄8" x 3⁄8" x 48" 0.50
3
⁄8" x 3⁄8" x 60" 0.80
3
⁄8" x 3⁄8" x 72" 1.10
1
⁄2" x 3⁄8" x 48" 0.50
1
⁄2" x 3⁄8" x 60" 0.80
1
⁄2" x 3⁄8" x 72" 1.10
3
Male iron pipe
elbow end
3
E
⁄8"
E
⁄8"
A Watts Water Technologies Company
USA: Tel: (978) 688-1811 • Fax: (978) 794-1848 • www.watts.com
Canada: Tel: (905) 332-4090 • Fax: (905) 332-7068 • www.watts.ca
ES-LFCDC-S 1405 © 2014 Watts