For Commercial & Residential Applications
ES-WB&T-LFMultTrnStps
Job Name
Job Location
Engineer
Approval
LEAD FREE
–––––––––––––––––––––––––––––––––––––––––––
–––––––––––––––––––––––––––––––––––––––––
–––––––––––––––––––––––––––––––––––––––––––––
–––––––––––––––––––––––––––––––––––––––––––––
*
Multi-Turn Water
Supply Stops
The Lead Free* Multi Turn Water Supply Stops are
constructed to comply with Lead Free* installation
requirements.
Features
• Available in straight and angle configurations
• Complies with NSF 61 Section 9
• IAPMO Listed
• Lead Free* brass
Contractor
Approval
––––––––––––––––––––––––––––––––––––––––––––
–––––––––––––––––––––––––––––––––––––––––––––
Contractor’s P.O. No.
Representative
LF894001
A
C
LF892003
B
––––––––––––––––––––––––––––––––––
––––––––––––––––––––––––––––––––––––––––
LF892013
A
C
LF894013
B
Pressure — Temperature
Maximum Pressure: 125psi (8.6 bar)
Maximum Temperature: 160°F (71.1°C)
* The wetted surface of this product contacted by consumable
water contains less than one quarter of one percent (0.25%) of
lead by weight.
MODEL
3 TO SUBMIT
IPS Inlet
LF889 003 Angle
LF890 003 Angle
LF890 003LK Angle
LF890 203 Angle
LF890 203LK Angle
LF890 303 Angle
LF890 303LN Angle
LF889 013 Straight
LF890 013 Straight
TYPE DESCRIPTION DIMENSIONS FINISH
3
⁄8" x 3⁄8" OD Comp 2 51 23⁄8 60 17⁄16 36 Chrome
1
1
1
1
⁄2" x 1⁄2" and 7⁄16" OD rubber slip joint 2 51 21⁄2 64 111⁄16 42 Chrome
1
⁄2" x 1⁄2" and 7⁄16" OD rubber slip joint
⁄2" x 3⁄8" OD Comp 2 51 21⁄2 64 19⁄16 39 Chrome
⁄2" x 3/8" OD Comp Loose Key Model 2 51 21⁄2 64 19⁄16 39 Chrome
1
⁄2" x 1⁄2" OD Comp 2 51 21⁄2 64 13⁄4 44 Chrome
⁄2" x 1⁄2" OD Comp Loose Key Model 2 51 21⁄2 64 13⁄4 44 Chrome
Less Nuts
3
⁄8" x 3⁄8" OD Comp 2 51 23⁄16 55 2 51 Chrome
1
⁄2" x 3⁄8" OD Comp 2 51 21⁄4 57 21⁄16 53 Chrome
A B C
in mm in mm in mm
2 51 2
1
⁄2 64 111⁄16 42 Chrome
Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements,
please contact Watts Technical Service. Watts reserves the right to change or modify product design, construction, specifications, or materials without prior notice and without incurring any obligation to make such changes and modifications on Watts products previously or subsequently sold.
A
A
MODEL NO.
3 TO SUBMIT
TYPE DESCRIPTION DIMENSIONS FINISH
Solder Inlet
LF892 003 Angle
LF892 503 Angle
LF892 013 Straight
CPVC Inlet
LF892 411 Straight
LF892 413 Straight
Compression Inlet
LF894 001 Angle
LF894 003 Angle
LF894 00WE Angle
LF894 003LK Angle
LF894 153 Angle
LF894 203 Angle
LF894 303 Angle
LF894 013 Straight
B
C
1
1
⁄2" with 5" extension x 3⁄8" OD Comp,
⁄2" x 3⁄8" OD Comp 2 51 23⁄8 61 17⁄16 36 Chrome
with deep escutcheon
1
⁄2" x 3⁄8" OD Comp 2 51 23⁄16 55 2 51 Chrome
5
⁄8" OD CPVC x 3⁄8" OD Comp 2 51 21⁄8 54 31⁄16 78 Rough Brass
5
⁄8" OD CPVC x 3⁄8" OD Comp 2 51 21⁄8 54 31⁄16 78 Chrome
5
⁄8" x 3⁄8" OD Comp 2 51 211⁄16 69 17⁄16 36 Rough Brass
5
⁄8" x 3⁄8" OD Comp 2 51 211⁄16 69 17⁄16 36 Chrome
5
⁄8" x 3⁄8" OD Comp with escutcheon 2 51 211⁄16 69 17⁄16 36 Chrome
5
/8" x 3/8" OD Comp Loose Key Model 2 51 211⁄16 69 17⁄16 36 Chrome
5
⁄8" x 1⁄4" OD Comp 2 51 211⁄16 69 17⁄16 36 Chrome
5
5
⁄8" x 1⁄2" and 7⁄16" OD, rubber slip joint 2 51 27⁄8 73 19⁄16 40 Rough Brass
⁄8" x 1⁄2" OD Comp 2 51 23⁄4 70 15⁄8 41 Chrome
5
⁄8" x 3⁄8" OD Comp 2 51 21⁄2 64 2 51 Chrome
C
A B C
in mm in mm in mm
2 51 7 178 1
B
7
⁄16 37 Chrome
A Watts Water Technologies Company
Canada: 5435 North Service Rd., Burlington, ONT. L7L 5H7; www.wattscanada.ca
USA: 815 Chestnut St., No. Andover, MA 01845-6098; www.watts.com
ES-WB&T-LFMultTrnStps 0940 © 2009 Watts