Watts HS-9600 User manual

APPLICATION
Today's ever-changing water quality issues demand that point-of use water treatment systems become an essential component of equipment applications. Because municipal water treatment facilities are designed to reduce mainly biological contaminants, they do not decrease contaminants that affect the performance of water dependent equipment. The Watts HS-Series water treatment systems are designed specifically for use on applications found throughout the healthcare industry, such as point-at-use steam generators, instrument and cart washers. When used as suggested by the manufacturer, The Watts HS-Series water treatment systems significantly reduce or eliminate boiler scaling and instrument spotting.
BENEFITS
Extends equipment life
Provides ‘spot-free’ rinse water at a fraction of the cost of
Deionization (DI water)
Reduces or eliminates boiler scale
Increases boiler heating element life and efficiency
EQUIPMENT FEATURES
Complete pre-treatment
Sediment filtration removes dirt, sand, and rust
KDF media filter reduces iron
Carbon filtration removes chlorine and other VOCs
TFC reverse osmosis membrane reduces up to 99% of
TDS
Complete post-treatment
PH adjusted
TDS balanced to ensure proper conductivity of water
1-year warranty
Factory performance tested and sanitized
UL listed controls
SYSTEM PERFORMANCE
When used as suggested by the manufacturer, the Watts HS­Series water treatment systems eliminate up to 99% of the following contaminants:
Total Dissolved Solids(TDS)
Volatile Organic Chemicals
Harness(CaCO3)
Chlorine additives
Note Limitation
: Not intended for drinking water.
HS-9600
Water Treatment System
PT# 61301605530 FT# 61301605529
WARRANTY
To order an HS-Series Water Treatment System or for more information, please call: Phone: 800-950-9912 Fax: 800-950-2570 Getinge USA Inc, 1777 East Henrietta Rd. Rochester, NY 14623
Rev: 042704/HS9600
Loading...
+ 3 hidden pages