Watts HP-BHM User Manual

Hydronic Packages for the
Heating Professional
Featuring the New Watts
Boiler Header Module
w a t t s . c o m
Faster, Cleaner Installations. Faster, Easier System Service.
Our Hydronic Packages take the
guesswork out of compliance with
boiler manufacturers’ recommenda-
tions for near-boiler piping detail.
They are innovative in a way that
heating professionals appreciate,
combining components in convenient
packages that are easy to install, use
and maintain.
Following manufacturers’ recom-
mendations for proper near-boiler
piping is critically important. Proper
piping means safer installations for
customers. It means faster, easier
system service once the installation is
complete. And proper piping means
quick, clean installations for the
heating professionals who are doing
the work.
As boilers continue to get smaller
and the spaces in which they are
placed are reduced in size, our
hydronic packages allow for consid-
erable functionality in a very econom-
ical space.
Complete Packages to Purge, Quiet, Fill, and Service Your Hydronic System
ut of the box, our Boiler Header Mod ule delivers compone nts that make following the industry rec ommended near-boi ler piping vi rtu-
O
ally foolproof . Boiler industr y recommendations (system purge statio n, followed by a n air separat or, fo llowed by a servi ce fitting) e nsure the c on­tractor correc tly pipes a hydronic installation — quickly, easily, and nea tly in a c ompact job sp ace.
AS-MB
Air Separator
PIPF-T
System Purge
RBFF
Service Fitting
B911S-M3
Fill Valve
Assembly
ETX
Expansion Tank
PIPF-T System Purge Station
During commissioning, by closing the Series PIPF-T’s ball valve and connect­ing a hose to the purge fitting, an installer can push all of the initial air out of the system. PIPF-T replaces up to seven fittings with a single compact unit.
AS-MB Air Separator
The AS-MB Air Separator employs rugged, corrosion-resistant coalescing me­dia and a Duo Vent air vent assembly to provide microbubble air separation for a quieter heating system. The unit is fully serviceable in the field and comes in a flanged model designed to mate with the PIPF-T System Purge Station.
RBFF Service Fitting
Setting a new standard for fast and easy service calls, the RBFF Service Fitting is connected below the AS-MB Air Separator. The RBFF employs a unique 3-way ball valve for isolation of the water pressure regulator and expansion tank from system pressure. The RBFF Service Fitting’s drain port allows for unload­ing pressure from the waterside of the expansion tank diaphragm for air charge servicing and maintenance. Compared with traditional installations, the RBFF’s one-piece construction eliminates up to 11 threaded joints.
PIPF-T
AS-MB
RBFF
B911S-M3 Fill Valve Assembly
The B911S-M3 Fill Valve Assembly, a combination high-capacity fill valve, backflow preventer, and feed water pressure regulator, is packaged in one pre­assembled unit. This valve is designed for use on boiler feed lines to provide make-up water to the boiler and prevent backflow when supply pressure fails below system pressure.
ETX Expansion Tank
Series ETX non-potable expansion tank is for use in closed loop hydronic heat­ing system piping to control the thermal expansion of hot water and maintain system pressure below the relief setting of the relief valve.
B911S-M3
ETX
Watts Boiler Header Module and Pro Hydronic Packages
Our Boiler Header Module and Pro Hydronic Packages are the newest additions to our combination of key boiler piping products packaged in a single master carton. The Pro Hydronic Packages include our newly introduced AS-MB Air Separator and RBFF Service Fitting. Service technicians will appreciate the ease of “wet side” service these packages provide.
Boiler Header Modules
Model EDP Includes
HP-BHM-75 0235093 AS-MB FL (0858549), RBFF (0386466), ¾" PIPF-T (0067790) HP-BHM-100 0235094 AS-MB FL (0858549), RBFF (0386466), 1" PIPF-T (0067791) HP-BHM-125 0235095 AS-MB FL (0858549), RBFF (0386466), 1-1/4" PIPF-T (0067792)
Boiler Header Module Pro Hydronic Packages
Model EDP Includes
HP-30PRO-P100 0235098 HP-BHM-100, ETX-30 (0066606), B911S-M3 (0386462) HP-30PRO-P125 0235099 HP-BHM-125, ETX-30 (0066606), B911S-M3 (0386462)
Pro Hydronic Packages with NPT AS-MB & RBFF
Model EDP Includes
HP-30PRO-100 0235096 AS-MB 100 (0858547), RBFF (0386466), ETX-30 (0066606),
B911S-M3 (0386462)
HP-30PRO-125 0235097 AS-MB 125 (0858548), RBFF (0386466), ETX-30 (0066606),
B911S-M3 (0386462)
Additional Resources
To view a video of the Watts Boiler Piping packages and other Watts products, visit the Watts Media Center at
http://www.watts.com/mediaCenter
For detailed information on the Watts AS-MB microbubble air separator, visit the product profile on the Watts website at
http://www.watts.com/AS-MB
For detailed information on the Watts RBFF Residential Boiler Fill Fitting, visit the product profile on the Watts website at
http://www.watts.com/RBFF
For information on these and all Watts products, visit the Watts website at http://www.watts.com
A Watts Wat er Technologies Company
Canada: 5435 North Service Rd., Burlington, ONT. L7L 5H7; www.wattscanada.ca
F-BHM 1101 © 2011 Watts
USA: 815 Chestnut St., No. Andover, MA 01845-6098; www.watts.com
Loading...