Watts FS-CTC-S User Manual

For Residential and Commercial Applications

ES-FS-CTC-S

Job Name

Job Location

Engineer

Approval

–––––––––––––––––––––––––––––––––––––––––––

–––––––––––––––––––––––––––––––––––––––––

–––––––––––––––––––––––––––––––––––––––––––––

Series FS-CTC-S FloodSafe®

Braided Stainless Steel Toilet Connectors

Series FS-CTC-S FloodSafe® Braided Stainless Steel Toilet Connectors are designed for use in residential & commercial applications, specifically for hookups to the toilet water supply. They include a patented FloodSafe side to protect against catastrophic water damage. There are no mechanical moving parts during normal operation and no power source is required. FloodSafe jacketed with braided stainless steel and require no tube cutting, bending, or soldering during installation. Various end connections are available.

Features

• Available in 6", 9" and 12" (150, 230 and 300mm) lengths

• IAPMO Listed

• Only economical and secure safeguard against catastrophic

water damage available on the market

• No mechanical moving parts during normal operation, ensuring years of maintenance free operation

• Does not require electricity, batteries or any other source of

power

• Installs between the stop valve and the fixture/appliance with

the FloodSafe

• FloodSafe

been stopped

device located at the stop valve

connectors can be easily reset if water flow has

shutoff device on the inlet

connectors consist of PVC tubing

Contractor

Approval

Contractor’s P.O. No.

Representative

––––––––––––––––––––––––––––––––––––––––––––

–––––––––––––––––––––––––––––––––––––––––––––

––––––––––––––––––––––––––––––––––––––––

––––––––––––––––––––––––––––––––––

FS-CTC-S-CB

Specifications

A braided stainless steel toilet connector shall be installed as indicated on the plans. The connector shall have a patented FloodSafe

be pressure rated to 125psi (8.75 bar) and be IAPMO listed.

Connector shall be a Watts Series FS-CTC-S.

Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements, please contact Watts Technical Service. Watts reserves the right to change or modify product design, construction, specifications, or materials without prior notice and without incurring any obligation to make such changes and modifications on Watts products previously or subsequently sold.

shutoff device on the inlet side. The connector shall

Models

FS-CTC-S-CB – One end of the flexible connector is supplied

with ballcock end fitting. The other end is supplied with a plated, solid brass compression end fitting for connection to a supply stop valve.

FS-CTC-S-FB – One end of the flexible connector is supplied

with a ballcock end fitting. The other end is supplied with a plated, solid brass female iron

Pressure – Temperature

Maximum Temperature: 180°F (82°C)

Maximum Pressure: 125psi (8.8 bar)

Note: A minimum flow rate of 2.5 gallons per minute at the

supply connection is required for proper shut off operation.

(Typically 30 psi supply pressure meets this requirement.)

Performance is accurate to the 80psi maximum system pressure

as required by national plumbing codes.

pipe thread fitting.

FS-CTC-S-TB – One end of the flexible connector is supplied

with a ballcock end fitting. The other end is supplied with a solid brass fine thread female iron pipe fitting.

Model Size (dN) leNgth Material Weight

in. mm in mm lbs kgs

FS-CTC-S-CB FS-CTC-S-CB FS-CTC-S-CB FS-CTC-S-CB FS-CTC-S-CB FS-CTC-S-CB FS-CTC-S-CB FS-CTC-S-CB FS-CTC-S-FB FS-CTC-S-FB FS-CTC-S-FB FS-CTC-S-TB FS-CTC-S-TB FS-CTC-S-TB FS-CTC-S-TB FS-CTC-S-TB FS-CTC-S-TB

⁄8 x 7⁄8 10 x 22 6 152 Stainless Steel 0.28 0.12

⁄8 x 7⁄8 10 x 22 9 229 Stainless Steel 0.22 0.10

⁄8 x 7⁄8 10 x 22 12 305 Stainless Steel 0.25 0.11

⁄16 x 7⁄8 11 x 22 6 152 Stainless Steel 0.19 0.09

⁄16 x 7⁄8 11 x 22 9 229 Stainless Steel 0.22 0.10

⁄16 x 7⁄8 11 x 22 12 305 Stainless Steel 0.24 0.11

⁄2 x 7⁄8 15 x 22 6 152 Stainless Steel 0.20 0.10

⁄2 x 7⁄8 15 x 22 9 229 Stainless Steel 0.23 0.10

⁄2 x 7⁄8 15 x 22 6 152 Stainless Steel 0.24 0.11

⁄2 x 7⁄8 15 x 22 9 229 Stainless Steel 0.27 0.12

⁄2 x 7⁄8 15 x 22 12 305 Stainless Steel 0.30 0.14

⁄8 x 7⁄8 10 x 22 6 152 Stainless Steel 0.20 0.10

⁄8 x 7⁄8 10 x 22 9 229 Stainless Steel 0.22 0.10

⁄8 x 7⁄8 10 x 22 12 305 Stainless Steel 0.25 0.11

⁄2 x 7⁄8 15 x 22 6 152 Stainless Steel 0.20 0.10

⁄2 x 7⁄8 15 x 22 9 229 Stainless Steel 0.23 0.10

⁄2 x 7⁄8 15 x 22 12 305 Stainless Steel 0.26 0.11

A Watts Water Technologies Company

USA: Tel: (978) 688-1811 • Fax: (978) 794-1848 • www.watts.com

Canada: Tel: (905) 332-4090 • Fax: (905) 332-7068 • www.watts.ca