Watts FS-CDC-S User Manual
For Residential and Commercial Applications
ES-FS-CDC-S
Job Name
–––––––––––––––––––––––––––––––––––––––––––
Contractor
––––––––––––––––––––––––––––––––––––––––––––
Job Location
–––––––––––––––––––––––––––––––––––––––––
Approval
–––––––––––––––––––––––––––––––––––––––––––––
Engineer
–––––––––––––––––––––––––––––––––––––––––––––
Contractor’s P.O. No.
–––––––––––––––––––––––––––––––––––
Approval
–––––––––––––––––––––––––––––––––––––––––––––
Representative
––––––––––––––––––––––––––––––––––––––––
Series FS-CDC-S
FloodSafe
®
Braided Stainless Steel
Dishwasher Connectors
Series FS-CDC-S FloodSafe®Braided Stainless Steel Dishwasher
Connectors are designed for use in residential & commercial applications, specifically for hookups to the dishwasher water supply.
They include a patented FloodSafe
®
shutoff device on the inlet side
to protect against catastrophic water damage. There are no
mechanical moving parts during normal operation and no power
source is required. FloodSafe
®
connectors consist of PVC tubing
jacketed with braided stainless steel and require no tube cutting,
bending, or soldering during installation. Various end connections
are available.
Features
• Available in 48", 60" and 72" (1219, 1524 and 1829mm) lengths
• NSF & IAPMO Listed
• Only economical and secure safeguard against catastrophic
water damage available on the market
• U.S. Patent No. 7,111,638
• No mechanical moving parts during normal operation, ensuring
years of maintenance free operation
• Does not require electricity, batteries or any other source of power
• Installs between the stop valve and the fixture/appliance with the
FloodSafe
®
device located at the stop valve
• FloodSafe
®
connectors can be easily reset if water flow has
been stopped
Specifications
A braided stainless steel dishwasher connector shall be
installed as indicated on the plans. The connector shall have a
patented FloodSafe
®
shutoff device on the inlet side. The connector shall be pressure rated to 125psi (8.75 bar) and be NSF
& IAPMO listed. Connector shall be a Watts Regulator
Company Series FS-CDC-S.
MODEL SIZE (DN) LENGTH MATERIAL WEIGHT
in. mm in. mm lbs kgs
FS-CDC-S-CE3⁄8 x 3⁄8 10 x 10 48 1219 Stainless Steel 0.66 0.30
FS-CDC-S-CE3⁄8 x 3⁄8 10 x 10 60 1524 Stainless Steel 0.76 0.34
FS-CDC-S-CE3⁄8 x 3⁄8 10 x 10 72 1829 Stainless Steel 0.87 0.39
FS-CDC-S-FE1⁄2 x 3⁄8 15 x 10 48 1219 Stainless Steel 0.70 0.32
FS-CDC-S-FE1⁄2 x 3⁄8 15 x 10 60 1524 Stainless Steel 0.81 0.37
FS-CDC-S-FE1⁄2 x 3⁄8 15 x 10 72 1829 Stainless Steel 0.92 0.42
ES-FS-CDC-S 0843 © Watts 2008
Models
FS-CDC-S-CE – Supplied with a plated, solid brass nut
compression end fittings at both ends of
the flexible connector and a brass male iron
pipe thread elbow fitting.
FS-CDC-S-FE – Supplied with a plated, solid brass nut
female iron pipe thread connector at one
end of the flexible connector and a brass
male iron pipe thread elbow fitting attached
to compression end fitting at the other end
of the flexible connector.
Pressure – Temperature
Maximum Temperature: 180°F (82°C)
Maximum Pressure: 125psi (8.75 bar)
Compression
end
Male iron pipe
elbow end
3
⁄8" ----------------------- 48", 60", 72" ----------------------3⁄8"
C
E
Female iron pipe
(FIP) end
Male iron pipe
elbow end
1
⁄2" ----------------------- 48", 60", 72" ----------------------3⁄8"
F
E
USA: 815 Chestnut St., No. Andover, MA 01845-6098; www.watts.com
Canada: 5435 North Service Rd., Burlington, ONT. L7L 5H7; www.wattscanada.ca
Water Safety & Flow Control Products
Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements, please contact Watts Technical Service. Watts
reserves the right to change or modify product design, construction, specifications, or materials without prior notice and without incurring any obligation to make such changes and modifications
on Watts products previously or subsequently sold.
Loading...