WATER QUALITY & CONDITIONING PRODUCTS
®
Features & benefits
• Low cost
• Excellent chemical resistance
• Food grade ingredients
• No leachables
• High dirt holding capacity
• Wide range of lengths and micron ratings
Typical applications
• Potable water
• Beverages
• Pre-filtration for reverse osmosis equipment
• Fine chemicals
• Electronics
• Plating solutions and more!
Specifications
Material Melt blown polypropylene
Maximum temperature 140˚ F / 60˚ C
Maximum pressure 40 PSID
Recommended change out 30 PSID
Maximum flow rate 2-8 GPM (based on micron rating)
Cartridge packaging Individually shrink wrapped for purity
Types Standard, Full-Flow and grooved
Micron ratings 1, 5, 20 and 50
02 4 810
1.0
.8
.6
.4
.2
.0
1 Mic.
5 Mic.
20 Mic.
50 Mic.
Flow (GPM)
Pressure Drop (psi)
Flow-Pro®Polyproplylene Melt Blown Cartr idges
Exceptional value with depth filtration is required.
Pressure drop
ANSI / NSF
STANDARD 42
COMPONENT
CERTIFIED
Grooved
cartridges
are available
for greater
surface area,
longer life
and reduced
filtration costs.
R
Flow-Pro®Melt Blown Cartr idges
Standard diameter (2-1/2")
5”
Part Number Length OD Micron No. / case
FPMB1-5 5" 2-1/2" 1 48
FPMB5-5 5" 2-1/2" 5 48
FPMB20-5 5" 2-1/2" 20 48
FPMB50-5 5" 2-1/2" 50 48
9-7/8”
FPMB1-978 9-7/8" 2-1/2" 1 48
FPMB5-978 9-7/8" 2-1/2" 5 48
FPMB10-975 9-7/8" 2-1/2" 10 48
FPMB20-978 9-7/8" 2-1/2" 20 48
FPMB25-978 9-7/8" 2-1/2" 25 48
FPMB50-978 9-7/8" 2-1/2" 50 48
20”
FPMB1-20 20" 2-1/2" 1 24
FPMB5-20 20" 2-1/2" 5 24
FPMB20-20 20" 2-1/2" 20 24
FPMB50-20 20" 2-1/2" 50 24
30”
FPMB1-30 30" 2-1/2" 1 24
FPMB5-30 30" 2-1/2" 5 24
FPMB20-30 30" 2-1/2" 20 24
FPMB50-30 30" 2-1/2" 50 24
40”
FPMB1-40 40" 2-1/2" 1 24
FPMB5-40 40" 2-1/2" 5 24
FPMB20-40 40" 2-1/2" 20 24
FPMB50-40 40" 2-1/2" 50 2
29-1/4”
FPMB5-2925 29-1/4" 2-1/2" 5 24
Full-Flow (B-B) 9-3/4" x 4-1/2" O.D. cartridges
Part Number Length OD Micron No. / case
FPMB-BB1-10 9-3/4" 4-1/2" 1 24
FPMB-BB5-10 9-3/4" 4-1/2" 5 24
FPMB-BB20-10 9-3/4" 4-1/2" 20 24
FPMB-BB50-10 9-3/4" 4-1/2" 50 24
Full-Flow (B-B) 20"x 4-1/2" O.D. cartridges
Part Number Length OD Micron No. / case
FPMB-BB1-20 20" 4-1/2" 1 12
FPMB-BB5-20 20" 4-1/2" 5 12
FPMB-BB20-20 20" 4-1/2" 20 12
FPMB-BB50-20 20" 4-1/2" 50 12
ANSI / NSF
STANDARD 42
COMPONENT
CERTIFIED
R
Distributed by:
Printed in USA. © 2006 Watts Water Quality & Conditioning Products.
Part numbers
Part Number Length OD MIcron No. / case
FPMBG-1-975 9-3/4” 2-1/2” 1 48
FPMBG-5-975 9-3/4” 2-1/2” 5 48
FPMBG-10-975 9-3/4” 2-1/2” 10 48
FPMBG-20-975 9-3/4” 2-1/2” 20 48
FPMBG-1-20 20” 2-1/2” 1 24
FPMBG-5-20 20” 2-1/2” 5 24
Grooved cartridges are also available
Grooved Flow-Pro cartridges are also available for greater surface
area to provide increased throughput and reduced costs.The
same specifications and pressure drop rates apply, and grooved
cartridges are also NSF certified.
®
WATER QUALITY & CONDITIONING PRODUCTS
Loading...