Spare parts and options for jumbo cartridge filters
Description Part Numbers Description Part Number
Gasket, Buna-N, single cartridge FM10017-B Drain plug, 1/2” FM8011
Gasket, Viton, single cartridge FM10017-V Vent plug, 1/4” FM2013
Cover clamp, single cartr idge FM10008 Head cover FM10001
Compression cap FMCC Center post, 40 FMCP40
Knob for compression cap, 1/2” FM8020 Center post, 90 FMCP90
Pressure gauges PGO15L25 Center post, 170 FMCP170
Mounting tabs
For 4 & 5 round models if
floor mounting is required.
Flange fittings with legs
Standard on 12 and 22
round models.
Cartridges adapters
Available by special order
for 222 and 226 cartridges.
Electro-polishing
For high purity water and
increased resistance to corrosion.
Flow-Max jumbo cartridge
Flow-Max pleated cartridges
Spare parts and options for multi-cartridge filters
Description Part Number Description Part Number
Gasket, Buna-N, 4 & 5 FM8017-B Hold down plate, 4 round FM8110-4
Gasket, Buna-N, 12 FM12021-B Hold down plate, 5 round FM8110-5
Gasket, Buna-N, 22 FM16021-B Hold down plate, 12 round FM12008
Gasket, Viton, 4 & 5 FM8017-V Hold down plate, 22 round FM16008
Gasket, Viton, 12 FM12021-V Center post, one high FM3014-12
Gasket, Viton, 22 FM16021-V Center post, two high FM3014-22
V-post, one high FM8050-S Center post, three high FM3014-32
V-post, two high FM8051-S Center post, four high FM3014-42
V-post, three high FM8052-S Vent plug, 1/4” FM2013
V-post, four high FM8053-S Drain plug, 1/2” FM8011
Knob, 4 round FM8019 Drain plug, 3/4” FMDP34
Knob, 5, 12, 22 FM8020 Electro-polishing, 4 & 5 FMEP-4/5
T-bolt, 4 & 5 round FM8006 Electro-polishing, 12 FMEP-12
T-handle, 4 & 5 round FM8007 Electro-polishing, 22 FMEP-22
Cover clamp, 12 round v-band FM12011 Flange fittings,1-1/2” FMFF-1.5
Cover clamp, 22 round v-band FM16011 Flange fittings, 2” FMFF-2
Mounting tabs (4 & 5 round) FMTABS 222 adapters (one / column) FMA-222
FMA-222-316 Spring assembly FMSA 226 adapters (one / column) FMA-226
Flow-Max®stainless steel filters for standard and “jumbo” cartridges.
We offer a wide range of filter housings,
which accept standard 2-3/4” OD
cartridges, or one single “jumbo” cartridge
to provide optimum convenience.
Either way, both cartridge types are
pleated for more surfacre area, greater
through-put and reduced filtration costs.
Flow-Max pleated cartridges cost less to
use, regardless what they cost to buy!