Commercial Heavy Duty
Water Softener – CWS200H
CWS200H water softeners are suitable
for commercial applications ranging from
100,000 to 600,000 grains of hardness removal capacity at ow rates up to 126 gpm.
Operation of the Softener - Hard water contains dissolved
minerals in the form of Calcium (Ca), Magnesium (Mg), and
Iron (Fe). An ion exchange process accomplishes removal of
these minerals. As water ows through the mineral tank, the
dissolved minerals become attached to the resin. Over a period of time the resin will become exhausted, and the softener
will regenerate using a brine solution.
Softening Media - The exchange media is a high quality
strong acid softener (Cation) resin with high whole bead count,
no color throw, and is chlorine resistant. The media combines
high operating capacity with excellent chemical and physical
stability for a long dependable life.
Regeneration Controller – These softeners feature the Watts
Enhanced Electronic controller. It combines simplicity with
exibility in a user-friendly package that is easy to setup and
operate. . Fully adjustable cycle times with 6-cycle control
allows for application specic settings. A turbine ow meter
provides accurate ow measurement and allows for efcient
operation. The H series controllers have the option of including the auxiliary system circuit board which allows up to four
Commercial Water Softeners
units to be connected together for multiple tank applications.
Control Valve - The Watts 2.0” Heavy Duty control valve
operates on command from the valve controller. A hydraulically balanced piston glides effortlessly along non-corrosive
spacers and seals to precise positions. The reliable and
proven DC drive performs in the toughest applications. The
lead free brass valve body is covered with an electro-statically
applied NSF/ FDA approved epoxy coating that resists corrosion and maintains a quality appearance over time. The 2.0” H
valves include a built in turbine meter for ow monitoring. This
feature reduces the cost, simplies the installation, and saves
space.
Resin Tanks – All models feature non-corrosive berglass
tanks, with a one-piece thermoplastic inner liner. The tanks
are approved by NSF, UL, FDA, and meet WQA standard
S-100.
Brine System – The brine tank is made of tough, high-density
polyethylene. Brine tanks 24” in diameter and smaller feature
a grid plate for maximum saturation of brine. A high quality air
check prevents air from entering the system.
Commercial Water Softeners
CWS200H System
Standard features
• Third party tested fully
automatic metered demand control valve
• Sophisticated digital
electronic controls that
store operating history
that can be accessed
by the user
• Fully adjustable regeneration cycles
• Durable lead free brass
bodied control valve for
years of service
• Input for remote signal
regeneration initiation
• WQA Certied high capacity resin
• Highly corrosion resistant NSF Certied berglass tanks
• Durable polypropylene
lower distribution system
watts.com
Commercial Water Softeners
Specication
model no. mineral Tank Brine Tank SofTening
Tank
Size
M4548WH 18x65 5 100 24x41 600 150 K 100 K 75 30 54/70 15/25 10
M4552WH 21x62 7 100 24x50 600 210 K 140 K 105 42 68/88 15/25 13
M4558WH 24x72 10 200 30x50 1200 300 K 200 K 150 60 75/97 15/25 15
M4559WH 30x72 15 400 39x48 2200 450 K 300 K 225 90 88/113 15/25 25
M4560WH 36x72 20 500 39x48 2200 600 K 400 K 300 120 97/126 15/25 35
Note: Flow rates listed above are based on pressure drop only. Selecting a system based on pressure drop alone does not guarantee that the system
will provide adequately softened water. System selection should be based on resin quantity, capacity required, feed water analysis, and application
requirements.
reSin
fT3
gravel
(lBS.)
Tank
Size
SalT
fill
CapaCiTy
max min max min
Ordering Information
model no. deSCripTion SpaCe required weighT
M4548WH A0150FM200WH with integral turbine meter 24 x 48 x 89 400 lbs.
M4552WH A0210FM200WH with integral turbine meter 24 x 52 x 89 600 lbs.
M4558WH A0300FM200WH with integral turbine meter 30 x 60 x 96 710 lbs.
M4559WH A0450FM200WH with integral turbine meter 39 x 75 x 106 1160 lbs.
M4560WH A0600FM200WH with integral turbine meter 39 x 81 x 107 1560 lbs.
SalT per
regeneraTion
flow raTe & preSSure
ServiCe
(gpm)
drop
(pSi)
Bkw
(gpm)
Commercial Water Softeners
A Watts Water Technologies Company
S-WQ-CWS200H 1310 © 2013 Watts
USA: Tel. (800) 659-8400 • www.watts.com
Canada: Tel. (888) 208-8927 • www.watts.ca