Watts CWM-S User Manual
For Commercial and Residential Applications
ES-CWM-S
Job Name
Job Location
Engineer
Approval
–––––––––––––––––––––––––––––––––––––––––––
–––––––––––––––––––––––––––––––––––––––––
–––––––––––––––––––––––––––––––––––––––––––––
–––––––––––––––––––––––––––––––––––––––––––––
Series CWM-S
Flexible Braided Stainless Steel
Water Supply Connectors for
Washing Machines
Sizes: 3⁄4" (20mm)
Series CWM-S Flexible Braided Stainless Steel Water Supply
Connectors for Washing Machines are used in residential and
commercial applications, specifically for washing machine hookups. These connectors provide full flow capacity and protection
from vibration and bursting under pressure surges caused by
washing machine solenoid valves. Series CWM-S Connectors
consist of PVC tubing jacketed with braided stainless steel, and
permanently attached brass, compression end fittings. Various
end connections are available.
Features
• Available in lengths: 48”, 60”, and 72”
(900, 1500, or 1800mm)
• Tubing
• PVC body
• Braided stainless steel jacket
• Brass compression end fittings and barbs
Contractor
Approval
Contractor’s P.O. No.
Representative
CWM-S-HH
––––––––––––––––––––––––––––––––––––––––––––
–––––––––––––––––––––––––––––––––––––––––––––
–––––––––––––––––––––––––––––––––––
––––––––––––––––––––––––––––––––––––––––
Models
CWM-S-HH - Supplied with standard brass female hose bib
CWM-S-HL - Supplied with standard brass female hose bib
fittings at each end of the flexible connector.
fittings at each end of the flexible connector.
One end fitting is supplied with a 90° elbow
between the fitting and flexible connector.
Dimensions
Hose Bibb end
H
3
⁄4" 48", 60", 72"
Hose Bibb end
3
H
⁄4"
Standards
UPC Listed
Pressure-Temperature
Maximum Working Pressure: 125psi (8.6 bar)
Maximum Temperature: 180°F (82°C)
Hose Bibb end
H
3
⁄4" 48", 60", 72"
3
90° elbow end
⁄4"
Materials
Tubing
Body: PVC
Jacket: Stainless steel
Fittings: Brass
Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements,
please contact Watts Technical Service. Watts reserves the right to change or modify product design, construction, specifications, or materials without prior notice and without incurring any obligation to make such changes and modifications on Watts products previously or subsequently sold.
Canada: 5435 North Service Rd., Burlington, ONT. L7L 5H7; www.wattscanada.ca
ES-CWM-S 0646 © Watts Regulator Company, 2006
PRODUCT INDIVIDUAL
NO. SIZE WGT. (LBS.)
CWM-S-HH
CWM-S-HH
CWM-S-HH
CWM-S-HL
CWM-S-HL
CWM-S-HL
3
⁄4" x 3⁄4" x 48" 0.5
3
⁄4" x 3⁄4" x 60" 0.8
3
⁄4" x 3⁄4" x 72" 1.1
3
⁄4" x 3⁄4" x 48" 0.5
3
⁄4" x 3⁄4" x 60" 0.8
3
⁄4" x 3⁄4" x 72" 1.1
Water Safety & Flow Control Products USA: 815 Chestnut St., No. Andover, MA 01845-6098; www.watts.com
L
Loading...