Watts CWM-A User Manual

For Commercial and Residential Applications

ES-CWM-A

Job Name

Job Location

Engineer

Approval

–––––––––––––––––––––––––––––––––––––––––––

–––––––––––––––––––––––––––––––––––––––––––––

–––––––––––––––––––––––––––––––––––––––––––––

–––––––––––––––––––––––––––––––––––––––––

Contractor

Approval

Contractor’s P.O. No.

Representative

Series CWM-A

Flexible Connectors with Microban®
Antimicrobial Technology Water
Supply for Washing Machines

Size: 3⁄4" (20mm)

Series CWM-A Flexible Braided PVC Connectors for Washing
Machines are used in residential and commercial applications,
specifically for washing machine hookups. These connectors
provide full flow capacity and protection from vibration and
bursting under pressure surges caused by washing machine
solenoid valves. Series CWM-A connectors consist of white
flexible PVC tubing jacketed with braided nylon polyester yarn
and an outer protective layer of PVC with infused Microban
antimicrobial technology to inhibit the growth of bacteria that
can cause stains, odors and product degradation.

Features

• Available in lengths: 48", 60", and 72"
(1200, 1500, or 1800mm)

• Tubing

• PVC body jacket

• Braided with polyester yarn

• Protective PVC outer layer with Microban

• Composite nuts

• Convenient for difficult installations

• Electrically non-conductive between connection points and

on the hose surface to prevent grounding, sparks and elec­tronic interference to and from other devices.

• No tube cutting or bending

• No soldering

• No extra adapters, fittings or couplings required

• No tools

®

Standards

UPC Listed

Pressure-Temperature

Maximum Working Pressure: 125psi (8.6 bar)

Maximum Temperature: 140°F (60°C)

Note: National residential plumbing codes reference the maxi-

mum operating temperature as 140°F (60°C). Plumbing fixtures
are designed to ANSI—ASME A112 18.1 at 125psi.

®

––––––––––––––––––––––––––––––––––––––––––––

–––––––––––––––––––––––––––––––––––––––––––––

–––––––––––––––––––––––––––––––––––

––––––––––––––––––––––––––––––––––––––––

CWM-A-HH

Models

CWM-A-HH - Supplied with standard composite female hose

thread fittings at each end of the flexible connector.

Materials

Tubing:

Body: PVC

Jacket: Braided with polyester yarn

Protective Layer: PVC - with Antimicrobial Technology

Fittings: Composite nuts

Washer: EPDM

Dimensions

MODEL SIZE UNIT
WgT. (LbS.)

CWM-A-HH
CWM-A-HH
CWM-A-HH

The Microban® trademark and all related trademarks are
the trademarks, service marks or registered trademarks of
Microban International, Ltd. and its subsidiaries.

3

⁄4" x 3⁄4" x 48" 0.5

3

⁄4" x 3⁄4" x 60" 0.8

3

⁄4" x 3⁄4" x 72" 1.1

Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements, please contact Watts Technical Service. Watts
reserves the right to change or modify product design, construction, specifications, or materials without prior notice and without incurring any obligation to make such changes and modifications
on Watts products previously or subsequently sold.

USA: Tel: [phone] • Fax: [phone] • www.watts.com
Canada: Tel: [phone] • Fax: [phone] • www.watts.ca

ES-CWM-A 1225 © 2012 Watts

A Watts Water Technologies Company