Watts A-158A User Manual
For Commercial and Residential Applications
ES-A158A
Job Name
Job Location
Engineer
Approval
–––––––––––––––––––––––––––––––––––––––––––
–––––––––––––––––––––––––––––––––––––––––
–––––––––––––––––––––––––––––––––––––––––––––
–––––––––––––––––––––––––––––––––––––––––––––
Model A-158A
Dishwasher Elbow Hose Fitting
Sizes: 3/8" Compression x 3/4"
Female Hose Thread (10mm x 20mm)
Watts Fitting Elbow was designed to be used on the new inlet
water valve for Whirlpool Dishwashers. This fitting is easier to
install, requiring less torque and no PTFE tape nor putty should
be used to obtain a consistent seal on a compression fitting.
Specifications
Elbow is manufactured from brass material. The 3/4" (20mm)
Female Hose Thread end will be connected directly to the
Dishwasher Inlet Valve. The 3/8 (10mm) Compression end can
be use on various types of tubing copper, brass, aluminum or
plastic tubing.
Temperature and Pressure
Maximum Temperature: 180°F (82°C)
Maximum Working Pressure: Type of tubing must be considered for
proper working pressure. Stainless Steel Connector: 150psi (10.3 bar)
Contractor
Approval
––––––––––––––––––––––––––––––––––––––––––––
––––––––––––––––––––––––––––––––––––––––––––––
Contractor’s P.O. No.
Representative
––––––––––––––––––––––––––––––––––––––––
A-158A
––––––––––––––––––––––––––––––––––
4
A
A
3
3
)]2.14[ 26.1(
(1.62[41.2])
A
A
Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements, please contact Watts Technical Service. Watts
reserves the right to change or modify product design, construction, specifications, or materials without prior notice and without incurring any obligation to make such changes and modifications
on Watts products previously or subsequently sold.
2
(1.14[29.0])
(.563[14.29])
Wrench
Flats
2
)]0.92[ 41.1(
)]92.41[ 365.(
HCNERW
STALF
4
5
5
1
1
USA: 815 Chestnut St., No. Andover, MA 01845-6098; www.watts.com
Canada: 5435 North Service Rd., Burlington, ONT. L7L 5H7; www.wattscanada.ca
ES-A158A 0940 © 2009 Watts
A Watts Water Technologies Company
Loading...