Watts 3546B User Manual
For Residential and Commercial Applications
ES-QC-35Ends
Job Name
Job Location
Engineer
Approval
LEAD FREE
–––––––––––––––––––––––––––––––––––––––––––
–––––––––––––––––––––––––––––––––––––––––
–––––––––––––––––––––––––––––––––––––––––––––
–––––––––––––––––––––––––––––––––––––––––––––
*
Series 35
Quick-Connect Ends
Watts Quick-Connect Ends are designed and manufactured
for many years of trouble free service. Produced of off white
Polysulfone, a high performance thermal plastic material, the
Watts Quick-Connect design allows for quick and easy connections without the use of installation tools.
Specifications
Connection shall be made using Watts Series 35
Quick-Connect fitting with Integral Collet and O-Ring guide.
Fitting shall be able to fully rotate under pressure and allow for
easy disconnect and reuse without the use of disconnection
tools. Fitting must not disassemble to disconnect
Approvals
NSF-61, NSF-14, CSA B137.5, ASTM F877, UPC, ASSE 1061
Ratings
100psi @ 180°F (6.8 bar @ 82°C)
250psi @ 75°F (17.3 bar @ 24°C)
Dimensions – Weights approx. (tolerance +/- 1/8)
Type 45 End Stops
MODEL SizE & CONNECTiON iTEM LENGTH iTEM HEiGHT iTEM WEiGHT
A B
in. mm in. mm lbs. kg.
Package Type: Bulk
3545-08
3545-10
3545-14
3545-18 1" CTS 11⁄2 38 13⁄4 44 1.2 .54
Package Type: Poly Bag
3545B-08
3545B-10
3545B-14
3545B-18 1" CTS 11⁄2 38 13⁄4 44 1.2 .54
Type 46 End Plugs
MODEL SizE & CONNECTiON iTEM LENGTH iTEM HEiGHT iTEM WEiGHT
A B
in. mm in. mm lbs. kg.
Package Type: Bulk
3546-18 1" CTS 111⁄16 43 13⁄8 35 0.5 .23
Package Type: Poly Bag
3546B-18 1" CTS 111⁄16 43 13⁄8 35 0.5 .23
3
⁄8" CTS 11⁄4 32 1 25 0.3 .14
1
⁄2" CTS 17⁄16 37 11⁄8 29 0.5 .23
3
⁄4" CTS 11⁄2 38 17⁄16 37 0.8 .36
3
⁄8" CTS 11⁄4 32 1 25 0.3 .14
1
⁄2" CTS 17⁄16 37 11⁄8 29 0.5 .23
3
⁄4" CTS 11⁄2 38 17⁄16 37 0.8 .36
Contractor
Approval
Contractor’s P.O. No.
Representative
Caution: The polysulfone material used in the Quick-Connect fittings
can be compromised by exposure to volatile organic compounds
(VOC’s) and caustic chemicals. Therefore, DO NOT expose this product to any such chemical or foreign substance, which would include
exposure to the following products: Pipe Dopes (thread sealants),
bug sprays, lubricants, cleaners, paints, bleaches, acids, solder fluxes,
plastic piping primers and cements, oxidizing agents, alkaline solutions,
thinners, fuels, oil based caulks, hydrocarbons, spray foam of foaming
agents (insulation).
* The wetted surface of this product contacted by consumable
water contains less than one quarter of one percent (0.25%) of
lead by weight.
B
––––––––––––––––––––––––––––––––––––––––––––
–––––––––––––––––––––––––––––––––––––––––––––
––––––––––––––––––––––––––––––––––
––––––––––––––––––––––––––––––––––––––––
3545
A
B
A
3546
Watts product specifications in U.S. customary units and metric are approximate and are provided for reference
only. For precise measurements, please contact Watts Technical Service. Watts reserves the right to change or
modify product design, construction, specifications, or materials without prior notice and without incurring any
obligation to make such changes and modifications on Watts products previously or subsequently sold.
USA: 815 Chestnut St., No. Andover, MA 01845-6098; www.watts.com
Canada: 5435 North Service Rd., Burlington, ONT. L7L 5H7; www.wattscanada.ca
ES-QC-35Ends 0933 © 2009 Watts
A Watts Water Technologies Company
Loading...