Watts 1062B User Manual
For Point-of-Use Water Applications
ES-QC-10 Valves
Job Name
Job Location
Engineer
Approval
LEAD FREE
–––––––––––––––––––––––––––––––––––––––––––
–––––––––––––––––––––––––––––––––––––––––
–––––––––––––––––––––––––––––––––––––––––––––
–––––––––––––––––––––––––––––––––––––––––––––
*
Series 10
Quick-Connect
Valves
Watts Quick-Connect Valves are designed and manufactured
for many years of trouble free service. Produced of off white
polypropylene, a high performance thermoplastic material,
the Watts Quick-Connect design allows for quick and easy
connections without the use of installation tools.
Specifications
Connection shall be made using Watts Series 10
Quick-Connect fitting with Integral Collet and O-Ring Guide.
Fitting shall be able to fully rotate under pressure and allow
easy disconnect and reuse without the use of disconnection
tools. Fitting must not disassemble to disconnect.
Contractor
Approval
Contractor’s P.O. No.
Representative
––––––––––––––––––––––––––––––––––––––––––––
–––––––––––––––––––––––––––––––––––––––––––––
––––––––––––––––––––––––––––––––––––––––
1039B
1062B
––––––––––––––––––––––––––––––––––
1053B
Approvals
• Listed by the National Sanitation Foundation to NSF
standard 61 for use in potable water systems
Ratings
150psi @ 70°F (10 bar @ 20°C)
60psi @ 140°F (4 bar @ 60°C) Min. 33°F (1°C)
Example
1039B-04
10 = Series 10
39 = Type 39 Union Stop Valve
B = Bag
04 = 1⁄4" OD
Caution: The polypropylene material used in the Quick-Connect fittings
can be compromised by exposure to volatile organic compounds
(VOC’s) and caustic chemicals. Therefore, DO NOT expose this product
to any such chemical or foreign substance, which would include
exposure to the following products: Pipe Dopes (thread sealants),
bug sprays, lubricants, cleaners, paints, bleaches, acids, solder fluxes,
plastic piping primers and cements, oxidizing agents, alkaline solutions,
thinners, fuels, oil based caulks, hydrocarbons, spray foam of foaming
agents (insulation).
* The wetted surface of this product contacted by consumable
water contains less than one quarter of one percent (0.25%) of
lead by weight.
Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements,
please contact Watts Technical Service. Watts reserves the right to change or modify product design, construction, specifications, or materials without prior notice and without incurring any obligation to make such changes and modifications on Watts products previously or subsequently sold.
Dimensions – Weights approx. (tolerance +/- 1/8")
Type 39 Union Stop Valve
MODEL SizE & CONNECTiON iTEM LENGTH iTEM HEiGHT iTEM WEiGHT
A B
in. mm in. mm lbs. kg.
1039B-04
1039B-06
Type 53 Female Angle Valve
MODEL SizE & CONNECTiON iTEM LENGTH iTEM HEiGHT iTEM WEiGHT
A B
in. mm in. mm lbs. kg.
1053B-0404 1⁄4" OD x 1⁄4" NPTF 29⁄16 64 21⁄16 52 0.83 23.59
1053B-0604 3⁄8" OD x 1⁄4" NPTF 25⁄8 65 21⁄16 52 0.90 25.51
1
⁄4" OD 21⁄2 63 19⁄16 39 0.70 19.96
3
⁄8" OD 215⁄16 74 19⁄16 39 0.83 23.59
B
A
B
A
Type 62 Male Stop Valve
MODEL SizE & CONNECTiON iTEM LENGTH iTEM HEiGHT iTEM WEiGHT
A B
in. mm in. mm lbs. kg.
1062B-04 1⁄4" OD x 1⁄4" NPTF 211⁄16 68 19⁄16 39 0.72 20.41
1062B-06 3⁄8" OD x 3⁄8" NPTF 3 75 19⁄16 39 0.83 23.59
B
A
A Watts Water Technologies Company
Canada: 5435 North Service Rd., Burlington, ONT. L7L 5H7; www.wattscanada.ca
USA: 815 Chestnut St., No. Andover, MA 01845-6098; www.watts.com
ES-QC-10 Valves 0933 © 2009 Watts
Loading...