Watts 1045B User Manual

For Point-of-Use Water Applications
ES-QC-10 Ends
Job Name
Job Location
Engineer
Approval
LEAD FREE
–––––––––––––––––––––––––––––––––––––––––––
–––––––––––––––––––––––––––––––––––––––––
–––––––––––––––––––––––––––––––––––––––––––––
–––––––––––––––––––––––––––––––––––––––––––––
*
Series 10 Quick-Connect End Stop
Watts Quick-Connect End Stop is designed and manufactured for many years of trouble free service. Produced of off white polypropylene, a high performance thermoplastic material, the Watts Quick-Connect design allows for quick and easy con­nections without the use of installation tools.
Connection shall be made using Watts Series 10 Quick-Connect fitting with Integral Collet and O-Ring Guide. Fitting shall be able to fully rotate under pressure and allow for easy disconnect and reuse without the use of disconnection tools. Fitting must not disassemble to disconnect
Approvals
• Listed by the National Sanitation Foundation to NSF Standard 61 for use in potable water systems
Ratings
150psi @ 70°F (10 bar @ 20°C)
60psi @ 140°F (4 bar @ 60°C) Min. 33°F (1°C)
Contractor
Approval
Contractor’s P.O. No.
Representative
Caution: The polypropylene material used in the Quick-Connect fit­tings can be compromised by exposure to volatile organic compounds (VOC’s) and caustic chemicals. Therefore, DO NOT expose this prod­uct to any such chemical or foreign substance, which would include exposure to the following products: Pipe Dopes (thread sealants), bug sprays, lubricants, cleaners, paints, bleaches, acids, solder fluxes, plastic piping primers and cements, oxidizing agents, alkaline solutions, thinners, fuels, oil based caulks, hydrocarbons, spray foam of foaming agents (insulation).
––––––––––––––––––––––––––––––––––––––––––––
–––––––––––––––––––––––––––––––––––––––––––––
––––––––––––––––––––––––––––––––––
––––––––––––––––––––––––––––––––––––––––
1045B
Dimensions – Weights approx. (tolerance +/- 1/8")
Type 45 End Stop
MODEL SizE & CONNECTiON iTEM LENGTH iTEM HEiGHT iTEM WEiGHT
A B
in. mm in. mm lbs. kg.
1045B-04
1
/4" OD
7
/8" 22 11/16" 16 0.10 2.72
Example
1045B-04
10 = Series 10 45 = End Stop B = Bag 04 = 1⁄4" OD
* The wetted surface of this product contacted by consumable
water contains less than one quarter of one percent (0.25%) of lead by weight.
Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements, please contact Watts Technical Service. Watts reserves the right to change or modify product design, construction, specifications, or materials without prior notice and without incurring any obligation to make such changes and modifications on Watts products previously or subsequently sold.
USA: 815 Chestnut St., No. Andover, MA 01845-6098; www.watts.com Canada: 5435 North Service Rd., Burlington, ONT. L7L 5H7; www.wattscanada.ca
ES-QC-10 Ends 0933 © 2009 Watts
B
A
A Watts Water Technologies Company
Loading...