WattBox WB-600-VCE-10, WB-600-SVCE-12 Owner's Manual
See Specifications for Individual Amounts
L
I
F
E
T
I
M
E
P
R
O
D
U
C
T
W
A
R
R
A
N
T
Y
SURGE
PROT ECTOR
$50,000
KEY FEATURES
L
I
F
E
T
I
M
E
P
R
O
D
U
C
T
W
A
R
R
A
N
T
Y
SURGE
PROTECTOR
™
OWNERS MANUAL
WB-600-VCE-10 WB-600-SVCE-12
$50,000
Surge Protection with Fireproof MOVs – Advanced Ceramic
MOV technology reduces risk of re from surges.
Surge Disconnect – In the event of a catastrophic surge event,
the WattBox™ component will sacrice itself and permanently
disconnect AC Power.
Safe Voltage Monitoring – WattBox™ components equipped
with Safe Voltage Monitoring will automatically disconnect system
equipment from harmful over and under voltages. When the Input
voltage returns to a safe level, the equipment will be reconnected.
Sequential Power – Protects against harmful speaker pop and
blown circuits by sequentially turning equipment on and off
(WB-600-SVCE-12)
Noise Filtration – Eliminates AC noise to improve picture and
sound quality.
Isolated Filtration Banks – Outlet banks are isolated from one
another to prevent cross contamination between components.
High Current Outlets – Designed for equipment with high current
demands such as ampliers and subwoofers.
12V Trigger IN - Allows source components to control the
switched outlets of WattBox™ 600 Series.
12V Trigger OUT – Provides 12V signal to control source equipment or another WattBox™ 600 Series device for sequencing of
equipment.
Flexible Power Cord – WattBox™ power cords are both exible
and durable, and designed for ease of installation.
Secondary Protection –Protected 3 GHz signal coax/satellite
connections plus Ethernet / Telephone connections.
Flexible Mounting – WattBox™ exible mounting options allows
vertical, horizontal or angled mounting. Mounts ush with back of
the rack and allows the installer to easily reach outlets. Hardware
is included to mount to the wall or back of a cabinet.
See Mounting Options on Pg. 4
Modular Display – Mount the display anywhere in the rack. The
WB-600-FP faceplate allows you to put the display at the top and
the outlets at the bottom of the rack.
(Sold Separately)
WELCOME TO WATTBOX™
WattBox™ power products are designed specically to provide customers with advanced protection for their valuable electronics and
Custom Integrators with maximum exibility for installation. Rest assured that WattBox™ products will deliver the protection and safety
for your customers’ needs. All WattBox™ products are UL certied and built with the highest quality components available such as
Fireproof MOVs.
Whether in a rack, a structured wiring enclosure or behind a flat screen, the versatile mounting options allows simple installation
of WattBox™ for easily managing power cords, adapters and signal cables. WattBox™ is the ideal choice for Custom Integrators
who demand reliability, safety, and exibility when installing power products for their valued customers.
WATTBOX™ 600 SERIES Installation and Users Manual
PACKAGE CONTENTS
(1) WB-600-VCE-10 or WB-600-SVCE-12
(1) 6ft Power Cord
(1) Small Rack Mounting Bracket
(1) Large Rack Mounting Bracket
(8) Mounting Bracket Screws
REAR PANEL
WB-600-SVCE-12
(4) Rubber Feet
(2) Sheets of Power Cord Labels (16 total labels)
(1) Owner’s Manual
(4) Screws, Washers, and Anchors
(6) Power Adapter Hook & Loop Tie Down Straps
2 3 4 51
13 15 16 6 7 8 9 10 11
1. Ground Lug
2. Protected 3GHz coax connections for cable/satellite
3. Safe Voltage LED indicator light
4. Surge Protection LED indicator light
5. Ground LED indicator light
6. 12V DC Trigger In/Out
7. Protected connections for Ethernet / Telephone
8. Safe voltage switch – Disables Safe Voltage Feature
9. Detachable power cord outlet with locking clip
10. 15 Amp resettable circuit breaker
11. AC Power switch
12. Hook & Loop Strap Lockdown – See Securing Power Adapters on Pg. 5
13. Outlets 1 – 4 – Unswitched (Always On) Isolated Filter for video/network components
14. Power Indicators for Outlets 1-4 – Illuminates when power is ON (x4 – 1 for each outlet)
1412
15. Outlets 5 -8 – Switched Isolated lter for audio/auxiliary
16. Outlets 9 – 12 Delayed/Isolated Filter for high current components
pg.2
WATTBOX™ 600 SERIES Installation and Users Manual
DI SPLAY LINK
WB-600-VCE-10
13 15
1. Ground Lug
2. Protected 3GHz coax connections for cable/satellite
3. Safe Voltage LED indicator light
4. Surge Protection LED indicator light
5. Ground LED indicator light
6. AC Power switch
1 2
3 4 5 6
87 9 10
111412
7. 12V DC Trigger In
8. Protected connections for Ethernet / Telephone
9. Safe voltage switch – Disables Safe Voltage Feature
10. Detachable power cord outlet with locking clip
11. 15 Amp resettable circuit breaker
12. Hook & Loop Strap Lockdown – See Securing Power Adapters on Pg. 5
13. Outlets 1 – 4 – Unswitched (Always On) Isolated Filter for video/network components
14. Power Indicators for Outlets 1-4 – Illuminates when power is ON (x4 – 1 for each outlet)
15. Outlets 5 -8 – Switched Isolated lter for audio/auxiliary
FRONT PANEL
1
2
1. Outlet – Supplies power to the WB-600-FP (Sold Separately)
2. Display Link – Data connection to WB-600-FP (Sold Separately)
© 2012 Wattbox
™
pg.3
WATTBOX™ 600 SERIES Installation and Users Manual
MOUNTING OPTIONS
The Wattbox™ 600 Series is designed for standard 19” equipment racks and features versatile mounting options. The multi-position
bracket allows vertical, horizontal or angled mounting. The unit can also be mounted ush with the rack or set back to the most
convenient position for a particular installation.
Attach the brackets to the Wattbox™ in the position you desire. Install the Wattbox™ using supplied hardware.
Small Bracket Mounting
Screw Position
Large Bracket Options
Screw Position
USE CENTER HOLES FOR ANGLED MOUNTING
Screw Position
90.0°
0.0°
Screw Position
Wall Mounting
USE CENTER HOLES FOR ANGLED MOUNTING
Screw Position Screw Position
USE CENTER HOLES FOR ANGLED MOUNTING
USE CENTER HOLES FOR ANGLED MOUNTING
Screw Position Screw Position
USE CENTER HOLES FOR ANGLED MOUNTING
USE CENTER HOLES FOR ANGLED MOUNTING
Screw Position
0.0°
pg.4
90.0°
45.0°
Loading...