Watson VCG-SD500 User manual

www.poweredbywatson.com
Grounded
Voltage Converter
For International Power Connectivity
Owner's
Manual
Please read before using this equipment.
Thank you for
purchasing the
Watson Grounded
Voltage Converter.
Browse through
this manual for
instructions and
useful tips on how
to use your new
equipment.
>
VOLTAGE CONVERTER OPERATION:
Plug Voltage Converter into
1
220/240 volt wall outlet.
Use an adapter plug if necessary. Plug adapters for various countries are available from Watson.
Plug in your appliance.
2
Plug your 110/120 volt appliance into the outlet on the Voltage Converter. Turn on the ON/OFF switch and then turn on your appliance. Models VCG-SD300 and VCG-SD500 have two outlets which allow you to use two products simultaneously. Make certain that the wattages of your appliances are at least 50 watts lower than the wattage capability of your converter.
4 | Voltage Converter Operation
After use,
3
unplug the Voltage Converter.
Do not leave the Voltage Converter plugged into the wall outlet when not in use.
WARNING:
Do not use with
appliances rated at
more than the marked
wattage of your voltage
converter. Check your appliance's rating plate for wattage. If wattage
is not indicated, multiply
voltage by amps
to calculate.
Voltage Converter Operation | 5
IMPORTANT INSTRUCTIONS:
 Your Watson Step-Down Grounded
Voltage Converter is designed to down-
convert foreign 220/240 volt electrical
current to 110/120 volt U.S. current.
 Watson Voltage Converters are available
in several wattage ranges. Be certain
you have selected the proper voltage
converter for your appliances.
 Voltage converters do not convert
electric cycles (60 Hz American vs. 50
Hz foreign). Check with your appliance
manufacturer if you have any questions.
 Some appliances will NOT operate
normally when used overseas, such as
microwave ovens, analog clocks, and
turntables.
6 | Instructions
LIMITED ONE-YEAR WARRANTY
Watson provides a limited warranty that this product is free from defects in materials and workmanship to the original purchaser under normal use for a period of one (1) year from the original purchase date. Watson's responsibility with respect to this limited warranty shall be limited solely to repair or replacement, at its option, of any product which fails during normal consumer use. This warranty does not extend to damage or failure which results from misuse, neglect, accident, alteration, abuse, improper installation or maintenance. EXCEPT AS PROVIDED HEREIN, WATSON MAKES NEITHER ANY EXPRESS WARRANTIES NOR ANY IMPLIED WARRANTIES. INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. To obtain a replacement during the time of this warranty please return the defective Item with proof of purchase along with an RMA number to the place of purchase. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
Warranty | 7
www.poweredbywatson.com
Loading...