Watson AA-8LCD User manual

8-Bay
Rapid Charger
for AA/AAA Ni-MH & Ni-Cd Rechargeable Batteries
Owner's
Manual
Please read before using this equipment.
Thank you for
purchasing the
Watson 8-Bay
Rapid Charger.
Browse through
this manual for
information and
useful tips on how
to use your new
equipment.
>
THE WATSON 8-BAY LCD BATTERY CHARGER'S FEATURES INCLUDE:
1. Eight Charging Indicators - 8
individual LCD indicators show the charging status of each battery.
2. Patented Technology allows
0
.
$
4 | Charger Features
you to charge different size or different capacity batteries simultaneously.
3. Automatic Charge Current Selection automatically selects charging current for AA and AAA batteries.
4. Reverse Polarity Protection,
Alkaline and Bad Battery Protection protect your batteries
and the charger from damage when batteries are installed incorrectly.
5. Automatic Timer Shut-Off - The
7
5
special automatic shut-off circuit senses when batteries are fully charged and automatically stops charging.
6. AC Adapter and DC Cord - Powered by an external AC adapter for indoor use or by a cigarette lighter plug from 12V car DC while you are traveling.
7. Microprocessor - Intelligent microprocessor control can fully charge batteries and prevents overcharging.
8. Delta Voltage Protection allows you to charge batteries fully.
9. Safety Timer also prevents batteries from overcharging.
10. A Unique Discharge Function allows you to refresh the batteries before charging.
Charger Features | 5
You can charge up to 8 AA/AAA Ni-MH/Ni-Cd batteries fully.
Multiple-battery design accommodates both AA and AAA Ni-MH
batteries. This is an economical power solution for high-tech,
The batteries can be charged at least 1000 times, and provide high
battery-operated devices.
performance for high-drain devices.
RAPID CHARGER OPERATION:
(A) Power Input
For indoor usage,
1
Connect the supplied AC adapter's
barrel plug into the charger's rear power input jack.
2
Plug the AC adapter into a standard AC
outlet.
Or, for in-car usage,
1
Plug the optional DC car cord into your
vehicle's cigarette lighter, without the charger attached.
2
Connect the charger to the connector
end of the DC car cord.
6 | Charger Operation
(B) Battery Charging
Insert 1 -8 AA/AAA batteries into the
1
battery chambers as indicated by the polarity symbols (+ and -) marked inside each chamber.
When a battery is fully charged, its icon
2
will stop flashing and an "F" will appear on the fourth level.
(C) Discharge Your Batteries
Periodically discharge batteries to extend battery life.
Press the white discharge button once
1
to discharge AA/AAA batteries, The battery icon will shift up and down while discharging.
When batteries are fully discharged,
2
the battery icon stops shifting. It will then display the battery capacity while charging.
Note: If discharge button accidentally pressed, unplug
charging unit to stop discharge process.
A flashing full-battery icon indicates an abnormality. The
charger will stop the charging process if it detects an issue.
Charger Operation | 7
CHARGING TIME*: (approximate)
Type
Capacity
Ni-MH
850 mA 0.8 hours 1.6 hours
AAA
1000 mA 1 hour 2 hours
1800 mA 1.8 hours 3.6 hours
2000 mA 2 hours 4 hours
AA
2300 mA 2.3 hours 4.6 hours
Left/Right
1-2 Cells
Left/Right
3-4 Cells
DISCHARGING TIME: (approximate)
Type
Capacity Current (mA) 1-8 cells
Ni-MH
850 mA
AAA
1000 mA 5 hours
1800 mA 9 hours
2000 mA 10 hours
AA
2300 mA 11.5 hours
Safety Guard Protection Time: AA/AAA - 6 hours
*Actual charging time may vary depending on the cell's discharge level, capacity, and condition. Longer charging time may occur
when the charger is used in temperatures above 35°C (95°F).
8 | Charging Time
200
4.25 hours
Connect the AC or DC Adapter here
Polarity Symbols
Charging Chamber
Discharge Button
LCD AAA
AC Adapter
DC Adapter
Tab
AA Tab
Charging Time | 9
SPECIFICATIONS:
Power Adapter: Input 100~240V AC, 50/60 Hz; Output 12V 1.3A
Rapid Battery Input 12V DC, 1.3A; Charger Output 1.5V
AA=500mA, AAA=250mA (max.)
Automatic Negative Delta V Shut-off
Approvals: Adapter: RoHS/FCC/ETL/CE
Charger: CE/RoHS
Dimensions: 7.8 x 3.1 x 1.2 (20 x 8 x 3.3 cm)
Weight: 4.2 oz. (120 g) (Charger unit)
Specifications are typical; individual units may vary. Specifications are subject to change and improvement without notice. The actual product may vary from the product pictured in this document.
10 | Charger Specifications
IMPORTANT SAFETY INSTRUCTIONS:
SAVE THESE INSTRUCTIONS
Be sure to observe the following important precautions whenever using the charger and adapter. Never try to open the case of the charger or attempt your own repairs. High­voltage internal components present the risk of electric shock when exposed.
 Keep the charger and adapter away from
water and other liquids. Never let them get wet. Moisture can cause fire and electric shock.
 Should you ever notice smoke or a
strange odor coming out of the charger, immediately unplug the AC adapter from the power outlet. Using the charger under these conditions can cause fire and electric shock.
 Unplug the AC adapter from the power
outlet and clean the area around the prongs of the plug when necessary. Dust around the prongs can cause fire.
Safety Instructions | 11
AC ADAPTER PRECAUTIONS
 Never use an electrical outlet whose
voltage is outside the rating marked on the AC adapter. Doing so can cause fire or electic shock. Use only the supplied AC adapter or DC car cord (optional) for the charger.
 Do not allow the AC adapter power
cord to be cut or damaged, and do not place heavy objects on it. A damaged AC adapter cord can cause fire or electric shock.
 Never try to modify the AC adapter
power cord, or subject it to severe bending, twisting, or pulling. Doing so can cause the risk of fire and electric shock.
 Never touch the AC adapter while your
hands are wet. Doing so can cause electric shock.
 Do not overload extension cords or wall
outlets. Doing so can cause fire and electric shock.
12 | Safety Instructions
 Indoor use only. Do not expose the
charger to rain or snow.
 To reduce the risk of damage to the
electrical plug and cord, disconnect by pulling the plug, not the cord.
 Make sure the cord is located properly
so that it will not be stepped on, tripped over, or subjected to damage.
 To reduce the risk of electric shock,
unplug the charger from the outlet before attempting cleaning, or when not in use.
 Do not use solvents to clean the unit.
They may damage the surface and the plastic parts of the unit. Clean the unit gently with soft dry cloth only.
 Not recommended for use by children.
BATTERY HANDLING PRECAUTIONS
Incorrect handling or misuse of bateries can cause them to leak or burst and damage your charger. Be sure to note the following important precautions to avoid problems with batteries.
 Use only Ni-MH or Ni-Cd dry cell batteries
with the charger. Do not charge any other
Safety Instructions | 13
kind of batteries, as they may burst and cause personal injury and damage.
 Always make sure that the plus (+) and
minus (-) terminals of the batteries are facing correctly, corresponding to the markings on the charger itself. Improper loading of batteries creates the danger of personal injury or damaging objects nearby.
 Do not expose batteries to direct heat or
dispose of them by burning. Doing so can cause an explosion.
 Do not operate the charger in an
environment with temperatures over 40°C (104°F) due to the risk of electrolyte leakage, over-heating, and battery damage.
 The batteries that power the equipment
normally become warm as they discharge.
 If electrolyte material touches your eyes,
immediately wash eyes with running cold water, and get medical attention.
 Please recycle the dead batteries, and
preserve our environment.
14 | Safety Instructions
ONE-YEAR LIMITED WARRANTY
This Watson product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later. The warranty provider's responsibility with respect to this limited warranty shall be limited solely to repair or replacement, at the provider's discretion, of any product that fails during normal use of this product in its intended manner and in its intended environment. Inoperability of the product or part(s) shall be determined by the warranty provider. If the product has been discontinued, the warranty provider reserves the right to replace it with a model of equivalent quality and function. This warranty does not cover damage or defect caused by misuse, neglect, accident, alteration, abuse, improper installation or maintenance. EXCEPT AS PROVIDED HEREIN, THE WARRANTY PROVIDER MAKES NEITHER ANY EXPRESS WARRANTIES NOR ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. This warranty provides you with specific legal rights, and you may also have additional rights that vary from state to state. To obtain warranty coverage, contact the Watson Customer Service Department to obtain a return merchandise authorization ("RMA") number, and return the defective product to Watson along with the RMA number and proof of purchase. Shipment of the defective product is at the purchaser's own risk and expense. For more information or to arrange service, visit www.poweredbywatson.com or call Customer Service at 212-594-2353.
Product warranty provided by the Gradus group. www.gradusgroup.com Watson is a registered trademark of the Gradus Group. ©2014 Gradus Group LLC. All Rights Reserved. GG2
Warranty | 15
www.poweredbywatson.com
Loading...